CVM-WS50 Multi-channels Smartphone Wireless Microphone FOR SMARTPHONE USER MANUAL
Specification Lavalier Transmitter (TX) : Channels 6 Wireless Frequency 520.00MHz ~ 526.00MHz Transmitting Power 15dBm Hand-held Transmitter (HTX) : Channels 6 Wireless Frequency 520.00MHz ~ 526.00MHz Transmitting Power 15dBm Receiver: Channels 6 Wireless Frequency 520.00MHz ~ 526.
Foreword Thank you for purchasing Comica WS50 multi-channels smartphone wireless microphone. WS50 is a creative wireless microphone for smartphone with built-in mobile phones holders.
Main Features . Working Distance Up to 60m (In Open Area, 30m in Barrier Area) ； . Built-in Metal Material Smartphone Holder； . LCD Screen for Displaying Channels and Audio Status； . Stepless Volume Adjustment； . Real-time Audio Monitor； . Extendable for Connection with LED Light, Grip, Tripod, Cold-shoe, etc； . Built-in Rechargeable Lithium Batteries； .
Notice . This product is compatible with both IOS and Android system, and when used with the iphone 7 or above, you need to use the original adapter cable; . For smart phones with IOS system (Iphones), this Mic works well either in Audio or Video mode; . For the smart phones with Android system, this Mic works well in audio mode, it may not be compatible with partial smart phones in video mode (Then we suggest you to try the 3rd party APP); .
Packing List Main Body: Lavalier Transmitter (TX) Hand-held Transmitter (HTX) Receiver Electronic Grip 2 3 4 1 WS50(A)= 1 WS50(B)= 1 WS50(C)= 1 WS50(H)= 2 + + + + Accessories: 3 3 3 3 + + + + Tripod on Table 5 6 4 5 6 5 1. 3.5mm Audio Mic 2.TRRS Audio Output Cable 3. USB Charging Cable 4. Belt Clip 5. Wind Muff 6. Portable Case 7. User Manual 8.
Components and Instruction Components 1 2 Lavalier Transmitter(TX) 1.Set Button for Channel Selection 2.On-off/Muting Button 3.Working Status Indicator Light 4.Mic / LINE Input Socket/ Reset Hole 5.Micro USB Charging Socket 6.Belt Clip Hole 7.
Hand-held Transmitter(HTX) 1. Microphone 2. LCD Display 3. Power /CH Setting Button 4. ‘Low Cut/Normal’ Audio Switch 5.
2 Receiver 1.Set Button for Channel Selection 2.Adjusting Screw 3.On/Off Button 4.Working Status Indicator Light 5.3.5mm Audio Output Socket/ Reset Hole 6.Micro USB Charging Socket 5 7.3.5mm Monitoring Socket 8.Smartphone Clamp 9.1/4 Thread at the bottom 10.1/4 Thread at the top 11.Volume Adjusting Button 1 3 4 External light and other equipment can be used on 1/4 thread at the top; Grip can be used for 1/4 thread at the bottom.
Ordinary Grip 1. 1/4 Screw Thread 2.
1 Electronic Grip 1. 1/4 Screw Thread 2. Adjustable Screw 3. 1/4 Thread at the Bottom 4. Bluetooth Remote Controller 5.
2 1 Tripod on Table 1. 1/4 Screw Thread 2. Adjustable Screw 3. Stretchable Tripods 4.
Screen Display Instruction Lavalier Transmitter(TX): Normal Recording Muting Power Indication Channel Audio Dynamic Display Bar Hand-held Transmitter: Normal Recording Power Indication Channel 11
Receiver: Normal recording Power Indication Channel Audio Dynamic Display Bar 12
Function Button Instruction On-off//Muting Button Lavalier Transmitter Set Button MIC / LINE Reset Long Press Power On/Off Short Press Muting Mode (Take effect when the screen is lighted up） Short Press Channel Selection （Take effect when the screen is lighted up） MIC/LINE Input / Audio Recording / Insert the Mic line for audio recording / Reset Hole Insert a small object like a pin for reset Reset Long Press Power On/Off Short Press Channel Sequence Switch Left Low-cut Right Normal Power
Receiver OUTPUT On-off Button Long Press Power On/Off Set Button Short Press Channel Selection (Take effect when the screen is lighted up) Reset Audio Output / Audio Output / Reset Hole Reset Volume Adjustment Wheel On-off Button Electronic Grip Matched with the Smartphone No Operation 14 Insert the Mic line for audio output / Insert a small object like a pin for reset Dial the wheel to the left/ right Volume Adjustment Long Press for 2 Seconds Power On Short Press In photo mode, press
Indicator Light Instruction Lavalier Transmitter Receiver Green Light Keeps On Normal Working Status Red Light Keeps On Muting Mode Red Light Flickers Low-power reminder Green Light Flickers Channel doesn’t match with the transmitter Green Light Keeps On Channels matches Red Light Flickers Low-power reminder Blue Light Flickers Electronic Grip (After the grip turned on) Green Light Flickers Grip doesn’t match with the smartphone Taking pictures/Video Recording 15
Installation and Usage Lavalier Transmitter(TX): 1.Connect the belt clip to the connection hole 2.Long press the power button to turn on the Lavalier Transmitter Power / Muting Button According to different environment you could short press ‘Power/Muting Button’ to enter the MUTE mode.
3.Insert the 3.5mm audio input line into the “Mic”socket “Mic”socket 4.
5.
Hand-held Transmitter (HTX) : 1.
2.
3.
Receiver: 1.Rotate the four clamps, then adjust the screw to appropriate height, install the phone in the neutral position; connect one end (black) of the audio output line to OUTPUT socket, the other end (gray TRRS) to mobile phone audio input socket; A 3.5mm headset can be inserted in real-time monitoring socket according to the need.
2.Long press the power button to turn on the receiver； Power Button 3.Short press set button to make channel consistent with the transmitter, and adjust the volume to the optimal status through the volume adjusting wheel； volume adjusting wheel Transmitter Channel “set” Button Receiver Channel When the receiver channel matches the transmitter, the green light keeps on.
4.Can be extendable for connection with LED light or other auxiliary equipment; 5.
Electronic Grip: 1.
2.Long press the power button to turn on the grip; Power Button 3.Turn on the bluetooth of the phone, match with the bluetooth named 'Viewflex - H', then you can use your smartphone for recording. China Mobile 26 In photo shooting mode, press the remote controller for photo taking;In video mode, press the remote controller to start video, and press again to finish.
Tripod on Table: 1.
Specification Lavalier Transmitter (TX) : 28 Signal / Noise ＞65dB Antenna 1/4 Wavelength Wire Antenna Stray Radiation ＜-60dBc Sound Delay ＜20ms Audio Distortion ＜0.5% Audio Input Socket 3.5mm socket Batteries Polymer Lithium Battery 3.7V 1150mAH Endurance 8 Hours Charging Socket Micro USB Dimension 85 x 59 x 16.
Hand-held Transmitter (HTX): Signal/Noise ＞65dB Antenna PCB Antenna Stray Radiation ＜-60dBc Sound Delay ＜20ms Audio Distortion ＜0.5% Battery 2pcs AA Battery Dimension Φ 53.
Receiver: 30 Signal / Noise ＞65dB Antenna 1/4Wavelength Wire Antenna Receiving Sensitivity -95dBm Sound Delay ＜20ms Audio Distortion ＜0.5% Frequency Response 20Hz ~ 18KHz Audio Input Socket 3.5mmSocket Batteries Polymer Lithium Battery 3.7V 1150mAH Endurance 8 Hours Charging Socket Micro USB Dimension 104 x 57.6 x 16.
Bluetooth Electronic Grip: Bluetooth Version 3.0 Effective Distance 10m Battery CR2032 x 1 Auto power-off time with no operation 10 minutes Dimension 35 x 25 x 8.
Email: support@comica-audio.
