CVM-WM100 UHF Wireless Microphone USER MANUAL
Specification Hand-held Transmitter HTX Channels 48 Wireless Frequency 520.000MHz ~ 534.100MHz Transmitting Power 15dBm Lavalier Transmitter TX Channels 48 Wireless Frequency 520.000MHz~534.100MHz Transmitting Power 15dBm Receiver RX Channels 48 Wireless Frequency 520.000MHz~534.
Foreword Thanks for purchasing the COMICA WM100 UHF wireless microphone. WM100 utilizes UHF wireless technology and LCD lattice screen, it comes with 16-levels adjustable volume, built-in with ‘Adjustable RF Strength’, ‘Local Audio Testing’, ‘Real-time Audio Monitor’ functions,etc., which takes you more professional and convenient recording; To ensure the security of the product, please carefully read the user manual ,correctly install and operate the item. Main Features .
Notice The antenna will affect working distance, be sure to protect it and avoid any man-made damage; Working distance will be affected by surround environment, make sure the background is open with no interference, and turn off the device’s WIFI during usage; RF strength is advised to set to ‘Low’ for short working-distance request, which can help decrease power consumption and increase power duration; While working with smartphone, one must purchase the TRS-TRRS audio cable adapter separately; Take notice
In Packing List Main Body Hand-held Transmitter Lavalier Transmitter Receiver WM100=Lavalier Transmitter+Receiver WM100H=Handheld Transmitter+Receiver Accessories 1 2 3 4 5 3.5mm Audio Mic 3.5mm-3.5mm Audio Output Cable 3.
Components and Instruction Components Hand-held Transmitter 1 2 3 4 5 6 7 Microphone LCD Display Power/CH Setting Button IR Screen Low cut/Normal Audio Switch Channel Sequence Switch AA Battery Holder 1 2 3 4 5 6 7 4
Lavalier Transmitter 1 2 3 4 5 6 7 8 9 Antenna LINE IN Input MIC Input Power/Muting Button Working Indication Light Function Selection Button Function Setting Button Function Selection Button + AA Battery Holder 1 2 3 4 5 6 8 7 9 5
Receiver 1 2 3 4 5 6 7 8 9 Antenna 3.5mm Audio Output 3.
Screen Display Instruction Hand-held Transmitter HTX: Normal recording mode Power Indication 88 Channel Lavalier Transmitter TX : RF Transmitting Strength High Icon： RF Transmitting Strength Low Icon： Normal Audio Mode Icon: Muting Mode Icon： Power Indication H Channel CH 00 520.
Receiver RX: RF Receiving Strength Volume Indication Power Indication VOL 15 Channel CH 00 520.
Function Button Instruction Power/Muting Button Long Press Power On/Off Short Press Muting（Unlocking Mode） Long Press Locking/Unlocking Function Setting （Unlocking Mode） Short Press Function Selection（Unlocking Mode） + Button Short Press Function Selection - Button Short Press Function Selection Lavalier Transmitter Set Button and Receiver Power/CH Setting Button “Low cut/ Normal” Hand-held Sound Switch Transmitter LCF Channel Sequence Long Press Power On / Off Short Press Channel Sequence
Installation and Usage Hand-held Transmitter Step 1. Install two AA batteries into the battery tray according to the positive and negative electrode AA AA Step 2.
Step 3. Matching with the receiver VOL 11 35 28 Hand-held transmitter’ channel Receiver’ channel A.
B.
C.
Lavalier Transmitter Step 1: Install Batteries into Battery Holder by following the ‘+’ and ‘-’ Icon, and clip the waist holder onto back of transmitter ; Step 2: Long-press the power button to open the transmitter; Step 3: According to your own requirement, to choose to connect the Mic cable onto ‘Line in’ or ‘Mic’ Input ; Step 4: Record with the Mic , and pay attention to the ‘Audio Status Indication Bar’ to check if the transmitter works ; 520.
Step 5: Refer to the Function Button Instruction to set the relative functions, for example: CH Adjustment, RF Strength Adjustment, LCF Adjustment; A. Unlock： 520. 000 Lock Long press SET button 520.
B.
C. RF Strength Adjustment： Short press SET button Adjust RF Adjust the RF signal strength by - + button D. LCF (Low-cut Filter) LCF OFF LCF ON Choose thin voice with LCF ON or thick voice with LCF OFF.
Receiver Step 1: Install the Receiver onto the device via cold-shoe, and connect one end of the audio cable into Output socket, connect another end of the audio cable into device’s audio input socket; And plug your earphone into the audio monitor’s socket for audio monitor if you need; Mount the cold shoe onto camera Mount the Receiver onto cold-shoe The receiver is mounted on the device Plug your earphone into the audio monitor’s socket Connect one end of the audio cable into Output socket, Connect anoth
Step 2: Set CH to match the channels, and adjust VOL to set the volume until you’re satisfied; A.Unlock： VOL 11 520. 000 Lock Long press SET button VOL 11 520.
B.Set CH to match the channels: Short press SET button VOL 11 Adjust CH channel Adjust CH by - + to match the Transmitter 20 The Green Light will keep on after channel matched.
C.Set the volume until you’re satisfied: Short press SET button VOL 11 VOL 11 Adjust VOL Adjust volume by - + button Step 3: Go for the normal audio recording.
Specification Hand-held Transmitter HTX 22 Signal / Noise >65dB Antenna PCB Antenna Stray Radiation <-60dBc Sound Delay <20ms Audio Distortion <0.5% Battery AA Batteries x 2pcs Dimension Φ53.
Lavalier Transmitter TX Signal / Noise ＞65dB Antenna 1/4 Wavelength Antenna Stray Radiation ＜-60dBc Sound Delay ＜20ms Audio Distortion ＜0.5% Audio Input Socket 3.5mm Socket Batteries AA Batteries x 2pcs Size 111.5 x 65 x 25.
Receiver RX 24 Signal / Noise ＞65dB Antenna 1/4 Wavelength Antenna Receiving Sensitivity -95dBm Sound Delay ＜20ms Audio Distortion ＜0.5% Frequency Range 20Hz ~ 18KHz Audio Output 3.5mm Port Batteries AA Batteries x 2pcs Size 111.5 x 65 x 25.
Email: support@comica-audio.
