CVM-AX3 XLR/6.35mm/3.
Foreword Thanks for purchasing COMICA CVM-AX3 XLR/6.35mm/3.5mm(2-Groups) Amplifier Audio Mixer. The Comica CVM-AX3 is a 3.5mm Dual-Groups Audio Mixer for shooting videos with any camera and camcorder . It is designed with support positive & passive mic, real-time monitoring, dual gain-control knobs functions etc. It provides a compact audio mixing solution. Please read this manual carefully before using.
Package Contents 1 2 3 4 5 Audio Mixer 3.5mm Audio Output Cable Cold Shoe Mount User Manual Warranty Card 1 2 XL R/3.5 CV mm M /6.
Components and Instruction Audio Mixer 1 2 3 4 5 6 7 8 9 10 11 12 13 14 2 Cold Shoe Interface INPUT1 6.35mm Audio Input Jack(Right) INPUT1 XLR Audio Input Jack (Right) INPUT1 6.35mm Audio Input Jack(Left) INPUT1 XLR Audio Input Jack(Left) Locking Plate 1/4 Screw Bolt 3.5mm INPUT2 Mono Input Jack(Right) 3.5mm INPUT2 Stereo Audio Input Jack 3.
Function Switch Guide and Notice 1.INPUT1 For Microphone that’s designed with XLR and 6.35mm Audio Output XLR Audio Input Jack 6.35mm Audio Input Jack INPUT1 XLR and 6.35mm are in the same jack and cannot be used at the same time 2.INPUT2 For Microphone that’s designed with 3.5mm Audio Output Stereo Right 3.5mm Mono Audio Input Left 3.5mm Mono Audio Input INPUT2 Mono and stereo input cannot be used at the same time.
3.LINE/MIC/PH (For INPUT1) If you’re using LINE IN function, set the switch to ‘LINE’ If you work in Non-Phantom Power Mode, set the switch to ‘MIC’ If you work in Phantom Power Opened Mode, set the switch to ‘PH’ Right LINE/MIC/PH Left LINE/MIC/PH 4.
5.LINE/MIC/3V (For INPUT2) If you’re using LINE IN function, set the switch to ‘LINE’ If you’re using Positive Microphone (Mic with power driven), set the switch to ‘MIC’ If you’re using Passive Microphone (Mic with no power driven) , set the switch to ‘3V’ Right LINE/MIC/3V Left LINE/MIC/3V 6.
7.L/R The Gain Control Button L/R is for adjusting sensitivity of Microphones (Corresponding with INPUT 1 & INPUT2 LEFT/RIGTH ) L 8.OUT 3.5mm audio output R OUT 9.
. For Audio Monitoring 11.M/S M is for mono mode ; S is for Stereo mode M/S If there’s only one group microphone connected with this device, then you have to set the M/S to M mode 12.
Installation and Usage Installation method one: 1.Connect the camera to the 1/4 double-screw bolt of the mixer through the 1/4 screw hole 2.
Second methods of installation: 1. Mount the cold shoe mount to the audio mixer 2.
3.
4.
5.
For stereo mic, connect it to the stereo input jack ('S') For mono mic, connect it to the corresponding 'L' / 'R' input jack 6.Set Mono/Stereo switch Mono/Stereo switch a. When uses only one mic or one channel, select ‘M’ and the output is mono b.
7. To ensure the recording quality, please turn Gain-Control Knob of the left and right to the proper volume position to get the best audio effect Left Gain-Control Knob Right Gain-Control Knob 8.
9.
Tech Parameters Input XLR x 2(L/R), 6.35mm x 2(L/R), Mono x 2(L/R), Stereo x 1(S), AUX Output 3.5mm audio output, 3.5mm headphone output Frequency Response 20Hz~20kHz, ±1dB THD+Noise <0.02%, RL=2kΩ, f=20Hz~20kHz, Vo=1Vrms Battery 9V 6LR61/6F22 x 1 Size 123 x 71 x 60.