CVM-AX1 3.
Foreword Thanks for purchasing COMICA CVM-AX1 3.5mm Dual-Groups Audio Mixer. The Comica CVM-AX1 is a 3.5mm Dual-Groups Audio Mixer for shooting videos with any camera and camcorder . It is designed with support positive & passive mic, real-time monitoring, dual gain-control knobs functions etc. It provides a compact audio mixing solution. Please read this manual carefully before using. This product has been precisely calibrated at the factory, do not assemble and disassemble parts by yourself.
Notice Mono and stereo inputs cannot be used simultaneously. Please do not put the device beside the heat or interference source. Please avoid falling, collision or pounding during usage. Don’t expose the device in rain or moist environment . Package Contents 1 2 3 4 5 Audio Mixer 3.5mm Audio Output Cable Cold Shoe Mount User Manual Warranty Card 1 2 3.
Components and Instruction Audio Mixer 1 2 3 4 5 6 7 Cold Shoe Interface LINE/MIC/3V Switch Mono Input Jack(Right) Stereo Input Jack Mono Input Jack(Left) AAA Battery Holder Gain-Control Knob 8 9 10 11 12 13 14 Audio Output Jack Real-time Monitoring Jack 3/8 Screw Hole 1/4 Screw Hole Mono/Stereo Switch Power Indicator Light Power Switch 1 1 1 6 2 3 4 5 7 7 2 8 9 10 11 12 13 14 3
Installation and Usage 1. Mount the cold shoe mount to the audio mixer 2.
3.
4.
5.
For stereo mic, connect it to the stereo input jack ('S') For mono mic, connect it to the corresponding 'L' / 'R' input jack Before using, you need to set the "LINE/MIC/3V switch" to the corresponding position according to the microphone type a. If you are using LINE IN input, set the switch to the “LINE”; b. If you are using a positive microphone(Microphone with internal battery-powered), set the switch to the “MIC”; c.
6.Set Mono/Stereo switch Mono/Stereo switch a. When uses only one mic or one channel, select ‘M’ and the output is mono b. When uses two mics or two channels simultaneously, you can optionally switch to 'M' (Mono Mode) or 'S' (Stereo Mode) according to your needs 7.
8.Power on, the indicator light up, and recording starts Indicator light Power Switch 9.
Tech Parameters Input Mono x 2(L/R); Stereo x 1(S) Output 3.5mm Port Output;Headphone Output Battery 1.
CVM-AX1 3.
前 言 感谢您购买科唛COMICA CVM-AX1 3.5MM双路音频麦克风混音器。 此产品可搭配相机、摄像机进行音频录制。它设计有支持主动/被动式麦克风、实 时监听、双音量调节、单/双声道转换、工作状态指示灯、AAA电池供电、多冷靴 接口等功能,全铝合金材质制作,功能十分强大,能带给您更好的音质效果。 使用前请认真阅读此使用说明书,本产品在出厂时已进行精密校准,请勿自行组 装拆卸零部件,否则不予保修! 产品主要功能 .双路3.5mm麦克风音频合二为一 .支持主动式/被动式麦克风 .实时监听 .双音量调节旋钮 .单声道/立体声音频输出 .状态指示灯设计 .AAA电池供电 .底部&两侧冷靴接口设计 .
注意事项 单声道和立体声输入不能同时工作 使用时请远离热源或干扰源 使用时请避免掉落,碰撞或重击 请勿在下雨或潮湿环境环境中使用,否则会有短路的危险 包装清单 1 2 3 4 5 混音器 3.5mm音频输出线 冷靴座 说明书 保修卡 1 2 3.
部件介绍及说明 混音器主体 1 2 3 4 5 6 7 8 冷靴接口 LINE/MIC/3V开关 单声道输入孔(右) 立体声输入孔 单声道输入孔(左) AAA电池仓 音量控制旋钮 9 10 11 12 13 14 音频输出孔 监听孔 3/8螺孔 1/4螺孔 单声道/立体声开关 指示灯 电源开关 1 1 1 6 2 3 4 5 7 7 2 8 9 10 11 12 13 14 3
安装与使用 1.将冷靴座安装至混音器 2.
3.用3.
4.
5.
若是立体声麦克风,接入“S”立体声输入孔 若是单声道麦克风,接入对应的“L”、“R”输入孔 使用时,务必根据使用需求以及麦克风类型, 将‘LINE/MIC/3V开关’拨动至相应位置: a.如使用LINE IN 输入,将开关拨至‘LINE’; b.如使用主动麦克风(麦克风内部有电池供电),将开关拨至‘MIC’; c.
6.设置单声道/立体声(M/S)开关 单声道/立体声(M/S)开关 a. 若使用单只麦克风或一个声道进行录音时,请将开关拨动至‘M’单声道 模式,此状态下只支持M单声道输出; b. 若使用双只麦克风或两个声道同时进行录音,您可根据个人需求选择‘M’ (单声道录音)或‘S’(立体声录音); 7.
8.开机,指示灯亮起,开始录音 指示灯 电源开关 9.
技术参数 输入 单声道 x 2(L/R),立体声 x 1(S) 输出 3.5端口输出,耳机输出 电池 1.
Email: support@comica-audio.