Owner’s Manual www.comfortzoneproducts.
www.comfortzoneproducts.com Intended Use: This product is intended for indoor residential and office use only, not for industrial or other commercial applications. Use only with electrical wiring that is in good working order and that meets applicable codes and ordinances. If you have any questions whether your wiring is adequate, consult a qualified electrician. While using your fan, you should follow the IMPORTANT INSTRUCTIONS listed below.
www.comfortzoneproducts.com Usage: Fan Operation: Always operate the fan in the upright position Remote Control following all instructions and recommendations listed in this manual. Fan Connection: Plug fan directly into 120 volt A.C., 60 Hz Control Panel wall outlet. Be sure plug fits tightly in outlet. A loose connection may cause overheating and damage to the plug or fan. NOTE: To prevent overloading a circuit, do not plug the fan into a circuit that is servicing other electrical needs.
www.comfortzoneproducts.com Mode Button: Press the MODE button on the Control Panel to select the "Normal", "Sleep" or "Nature" function; the icon will illuminate on the LED Panel. Normal Mode : The fan will operate on any speed the user selects. Sleep Mode : The fan will cycle through one (1) set of "Speed" levels. Nature Mode :The fan will cycle through two (2) sets of "Speed" levels. Remote Control: Press the "MODE" button to select between the different functions.
www.comfortzoneproducts.com Care and Maintenance Cleaning: CAUTION-Before cleaning the fan be sure to disconnect power cord from the outlet. Clean the grille surface with a clean damp cloth. Do not use harsh chemical or abrasive cleaners. DO NOT IMMERSE THE FAN OR ANY WIRES IN WATER. Allow fan to dry completely before use. Periodic grille cleaning with a vacuum will prevent dust build up. The motor is sealed and does not require any interior maintenance, cleaning or lubrication.
www.comfortzoneproducts.com Limited Warranty This unit is guaranteed to the original retail purchaser against defects in quality or workmanship for a period of one year from the date of original purchase. If this unit fails because of a manufacturing defect within 30 days of purchase, return the unit, with your receipt, to the retailer.
