ENJOY THE SMART LIFE · FULL MAN KIT VISTO W S m a r t V i d e o D o o r b e l l Passion.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EN Congratulations on your purchase of the KitVisto2 by Comelit! Comelit Group S.p.A. is an innovative company that combines cutting edge production technologies with carefully selected materials and meticulous attention to detail to create a product that is extremely reliable and sturdy. Observe the indications given in this manual to ensure the correct installation and use of the product. This document may not be reproduced, even in part, without the express written consent of Comelit Group S.p.A.
7 mm (1, 28 Mounting instructions on page 42 ") 85 (1, mm 1") 10 28 (1, 10 2 3 4 mm 47 5 mm 28 (1, ") 10 85 (1, 2. Surface mount by means of screws 3. Cable inlet hole mm 4. Connection terminal ") + - Visto2 power supply 7 NO Normally open relay contact COM Common relay contact 11 8 2 10 5. Brightness sensor 6. Wide-angle color camera 7. Microphone 8. Interchangeable cover (Mounting instructions on page 41) 9 1 6 1. Fixing hole for accessories art. 3525, art.
Mounting instructions on page 43 Chime for KitVisto2 with integrated Wi-Fi and with Ethernet port for connecting to the router as an alternative to the WiFi connection. Surface-mounted, 3 screws and 3 wall-plugs provided. You can select 4 different pre-stored melodies; melody selection and volume adjustment are possible via the Comelit Visto app. ") m (6,8 173 m 47 (1 ,8 1 m m 5" ) 110 mm (4,3") Power supply 12-24 VAC 1. Cover 2. 3. 4. 5.
EN It is advisable to install the Chime 3524 near the Wi-Fi router. Always check the quality of the Wi-Fi signal before final installation of the product. If your Wi-Fi signal is not strong enough, it can effect the video and audio quality and operation of the KitVisto2; in this case we recommend to connect the art. 3424 to the router via the Ethernet cable. Wiring diagrams from page 44 Maximum connection distances A Art.
EN LED guide Chime 3524 LED guide Start Confirmation of door opening Searching for a network Network not available Loss of network connection A Power supply B Wi-Fi LED C Front Visto2 LED D Rear Visto2 LED Connected to Chime 3524 Not connected to the server Standby mode Call in progress Conversation in progress Updating in progress... C D WARNING: this update can take up to 10 minutes, DO NOT remove the power during this process.
EN Visto2 Kit After downloading the COMELIT VISTO app from the store onto your smartphone, you can use the app to connect the KitVisto2 to your router via Wi-Fi or cable. If your router is connected to the internet then your Smartphone will receive a push notification for motion detection notification and can communicate between the Visto2 Kit and your smartphone. The Visto2 Kit supports 433.
Art. 3527W, Art.
Art.
Art.
Wi-Fi connection between art. 3524 and router Connessione Wi-Fi tra art. 3524 e router Connexion entre l’art. 3524 et le routeur par Wi-Fi 110/220V Aansluiting tussen art. 3524 en router via Wi-Fi Verbindung Art. 3524 und Router über WLAN 12-24V AC Conexión entre el art. 3524 y el router mediante Wi-Fi ROUTER + 44 - NO C R COM art.
Ethernet connection between art. 3524 and router Connessione LAN ethernet tra art. 3524 e router Connexion entre l’art. 3524 et le routeur par câble Ethernet 110/220V Aansluiting tussen art. 3524 en router via ethernetkabel Verbindung Art. 3524 und Router über Patchkabel (Ethernet) 12-24V AC Conexión entre el art. 3524 y el router mediante cable Ethernet art.
Maximum system expansion Maximale systeemuitbreiding Massima espansione d’impianto Maximale Anlagenerweiterung Extension maximale de l’installation Máxima expansión de la instalación 110/220V + - NO C VISTO2 FRONT 46 + - NO R COM VF+ VFVR+ VR- 12-24V AC F ROUTER C VISTO2 REAR PUSH BUTTON 1 PUSH BUTTON 2 INTERNET APP
Variant for electric lock connection Uitvoering met elektrisch slot Variante per la serratura elettrica Variant für Elektrische Verriegelung Variant pour connection d’un verrou électrique Variante para conexion de cerradura electrica 110/220V 12-24V AC/DC + VISTO2 - NO C max 1A 47
PRO INSTALLATION TIPS During the configuration you will be asked to know the DEVICE PASSWORD, use 888888.
We recommend to change the device password once installed for maximum Security Per una massima sicurezza si consiglia di cambiare la password del dispositivo Pour plus de sécurité, il est conseillé de choisir un autre mot de passe après avoir installé le dispositif.
If you are using the door strike feature, we recommend that you set a unlock password (default 888888). Otherwise you can activate the “One-Key Unlock” feature. Se si vuole utilizzare il comando APRIPORTA da smartphone, per maggiore sicurezza raccomandiamo di inserire ogni volta la password (default 888888). É possibile altrimenti attivare la funzione di memorizzazione password premendo “Sblocco One-Key”.
The Master user can invite an unlimited number of Slave users using the My Share button in the settings menu. L’utente Master può invitare un numero illimitato di utenti Slave utilizzando il pulsante La mia condivisione nel menu impostazioni. L’usager Master peut inviter un nombre illimité d’usagers Slave en utilisant le bouton My Share dans le menu des réglages. 1. 2. De hoofdgebruiker kan een onbeperkt aantal andere gebruikers uitnodigen met behulp van de Mijn delen-knop in het menu instellingen.
ATTENTION! Visto2 needs to be upadted to the latest firmware version. In the Visto Comelit app, a red dot on the symbol, at the top right, indicates the availability of updates and useful information for the proper functioning of the device. Once your device is connected to the network, it is highly recommended to update it. ATTENZIONE! È necessario che Visto2 disponga dell’ultima versione firmware.
¡ADVERTENCIA! Es necesario que Visto2 tenga la última versión de firmware. En la aplicación Comelit Un punto rojo en el símbolo en la parte superior derecha indica que las actualizaciones y la información están disponibles para ayudar al dispositivo a funcionar correctamente. Una vez que el dispositivo está conectado a la red, recomendamos proceder con la actualización. 3. 4. 1. 2.
COMPLETE MANUAL WIRING DIAGRAMS www.vistodoorbell.
