Installation Instructions
HDMI cable
Power adapter
Voice Remote
Wireless TV Box
2 AA batteries installed
The billing for your new Xnity service(s) will begin within 5 days from the date your order for service(s) is placed.
Before you begin, be sure your Wireless
Gateway is powered on and activated and
within range of your Streaming TV Box.
Secure the HDMI cable between
your TV and the Wireless TV Box. Turn
on your TV and select the HDMI Input.
Plug the power adapter into an
electrical outlet and connect the other
end to the Power port on the Box.
Remove the tab from the back of the
remote, aim it toward the Box and wait
for onscreen instructions.
Once the power indicator lights up, you’re ready
to go. Only use the supplied power adapter.
Avoid outlets controlled by dimmers.
You can also use an Ethernet cable (not included) to
set up a wired connection instead. Please remove the
protective clear lm from your devices.
2 AA batteries installed
Pull tab
Get started
1
2
3
4
If you have a Primary TV Box, be sure
that’s also powered on and activated.
HDMI
HDMI on TV
Power