User manual

ManualsBrandsCombi ManualsTVs & monitorsSavona TS 4000

Notice

Warnings, Cautions and Notes

Throughout the whole user manual, pay special attention to the following marks that

indicate hazardous situations.

• Warning

Indicates a hazardous situation which could result serious injury.

• Caution

Indicates a situation which could damage the equipment or other apparatus.

• Note

Indicates additional information to make the user aware of possible problems and

information of any importance to help understand, use and maintain the installation.

Meaning of Symbols

To reduce the risk of electric shock, do not remove cover (or

back). No user serviceable parts inside. Refer servicing to

qualified service personnel.

This symbol indicates dangerous voltage inside the receiver

that presents a risk of electric shock or personal injury.

This symbol indicates important instructions accompanying

the receiver.

Safety Warning

This receiver has been manufactured to comply with international safety standards. Please

read the following safety precautions carefully.

Safety Instructions and Precautions

1.MAINS SUPPLY (100-240V - 50/60Hz)

•Operate this product only from the type of power supply indicated on the

marking label. If you are not sure of the type of power supplied to your home,

consult your local power company. Disconnect the product from the mains

before you start any maintenance or installation procedures.

2.CONNECTION TO THE AERIAL ANTENNA and THE SATLLITE ANTENNA

•Disconnect the product from the mains before connecting or disconnecting the cable from

the aerial. Fail to do so can damage the aerial.

3.CONNECTION TO THE TV

•Disconnect the product from the mains before connecting or disconnecting the cable from

the TV. Fail to do so can damage the TV.

4.OVERLOADING

•Do not overload a wall outlet, extension cord or adapter as this may result in electric fire

or shock.

Summary of content (22 pages)

PAGE 1
Notice Warnings, Cautions and Notes Throughout the whole user manual, pay special attention to the following marks that indicate hazardous situations. • Warning Indicates a hazardous situation which could result serious injury. • Caution Indicates a situation which could damage the equipment or other apparatus. • Note Indicates additional information to make the user aware of possible problems and information of any importance to help understand, use and maintain the installation.
PAGE 2
5.LIQUIDS •The product should not be exposed to liquid of any kind. In addition, no objects filled with liquid should be placed on the apparatus. 6.CLEANING • Disconnect the product from the wall outlet before cleaning. • Use a light damp cloth (no solvents) to dust the product. 7.VENTILATION • The slots on top of the product must be left uncovered to allow proper airflow into the unit. • Do not stand the product on soft furnishings or carpets. • Do not stack electronic equipments on top of the product. 8.
PAGE 3
Contents 1Before Using the Product ....................................................................... 4 1.1 Front Panel ............................................................................................. 4 1.2 Rear Panel ..............................................................................................5 1.3 Remote Control ...................................................................................... 6 2Setup .................................................................
PAGE 4
1 Before Using the Product This section provides detailed instructions on the product and its accessories. 1.1 Front Panel 1.POWER BUTTON Push to power on/off the main power supply. 2.VOL+/VOL- BUTTON Adjusts the audio volume. 3.OK BUTTON Selects a menu, or confirms the selected operation. Also displays the channel list while 4.CH+/CH- BUTTON Moves the TV/radio channel up or down. 5.MENU BUTTON Displays the main menu 6.LED DISPLAY WINDOW Displays the current channel number. 7.
PAGE 5
1.2 Rear Panel 1.LNB IN Connect to the satellite dish for signal. 2.ANT-OUT Connects to the RF IN of the TV using a RF cable. 3.LOOP OUT Connect to another receiver. 4.ANT-IN Connects the aerial cable. 5.Ethernet port Connect to the PC or another receiver. 6.USB INTERFACE It is used to software upgrade and media playback. 7.RS232 port Data transfer with PC or other receiver. 8.HDMI Connects to the TV using an HDMI cable and HD OUT output 9.COAXIAL Connects to the Amplifier and outputs SPDIP . 10.
PAGE 6
1.3 Remote Control Key Function Tums power ON/DFF of the DTR MUTE AUDIO SUB TIMESHIFT USB TV/RADIO TTX/CC PVRLIST When watching a program, mute the sound. Choose audio mode. Subtitle Timeshift Enter media menu Switches between TV and Radio mode. Switch to teletext mode. Enter PVR file list Starts or resumes media play Pauses media play. Stop media play/Stop to record program. Press this key start to record the program.
PAGE 7
2 Setup This chapter describes how to connect your receiver to the TV with the particular equipments for gaining optimum signal quality. The receiver provides various interfaces to connect to the TV or other devices. Select the most appropriate procedure depending on the equipment you have. Note: If you encounter any problems setting up your receiver, please contact your local receiver distributor 2.
PAGE 8
3 Installation Wizard If you are using the receiver at the first time or have restored the receiver to Factory Default, the Installation Guide Menu will appear on your TV screen. (1)[OSD Language]: Press RIGHT/LEFT key to select a language. (2)[Country]: Press RIGHT/LEFT key to select your country of residence. (3)[Channel Search]: Press RIGHT/LEFT key to select DVB-T or DVB-S/S2 to Scan . (4)Press OK key to begin Automatic channel search,Once channel tuning is complete, you can start watching TV programs.
PAGE 9
(a) Program Edit To edit your program preferences (lock, skip, favorite, move,rename or delete), you will need to enter the Program Edit Menu. This Menu requires a password to access. The default password is '000000', while the master unlock password is '888888'. Set Favorite Channels You can create a shortlist of favorite programs that you can easily access. Set Favorite TV or Radio program: 1.Select your desired channel then press the FAV button.
PAGE 10
Skip TV or Radio Channel 1.Select the channel you would like to skip and press the GREEN button. A skip symbol is displayed. The channel is marked as a skip. 2.Repeat the previous step to skip more channels. 3.To save your settings and exit the menu, press EXIT key. Disable the Skip Channel function: Select the skip channel and press the GREEN button on the remote control to cancel. Move a TV or Radio Program 1.Select the preferred channel then press the RED button. A move symbol will appear. 2.
PAGE 11
(a) Aspect Ratio You can set the display format to either 4:3 Pan Scan, 4:3 Letter Box , 16:9 Wide Screen or Screen or Auto to get the maximum display when watching TV. (b) Resolution You can change this setting if the picture resolution does not appear to be correct. This setting is to match the most common setting for HDMI.
PAGE 12
settings. Press EXIT to exit Menu. 4.3.1 Terrestrial Channel Search This Menu provides options to adjust the terrestrial search channel settings. Press UP/DOWN to select an option and RIGHT/LEFT to adjust the settings. Press EXIT to exit this menu.
PAGE 13
(a) Auto Search This option will automatically search for channels and save them once the scanning is complete. All previously saved channels and settings will be deleted. 1.Select [Auto Search] and press OK or RIGHT to start channel search. 2.To cancel channel search, press EXIT. Any channels that have been found will be saved. (b) Manual Search This option allows you to scan for new channels without deleting previously saved channels and settings. 1. Select [Manual Search] then press OK or RIGHT.
PAGE 14
4.3.2 Satellite Channel Search This Menu provides options to adjust the satellite search channel settings. Press EXIT to exit this menu. (a) Satellite list Press UP/DOWN keys to select a satellite at left side, whose settings will be shown at right side. Add satellites: Press RED to add a new satellite, in which you must input an unique longitude, and edit the satellite’s name with soft keyboard. Edit satellites: Press GREEN to edit the focused satellite.Press OK to confirm.
PAGE 15
Add transponder: Press RED to add a new transponder. It can’t save an existing TP under the same satellite. Delete transponder: Press YELLOW to delete the focused transponder. Press OK to confirm. Single Transponder Scan: Press BULE to pop the menu of scanning setting. After configuring the settings, Press OK to start scanning. Multi- Transponder Scan: Press OK to select transponders with a mark , then press BULE to pop the menu of scanning setting.
PAGE 16
4.4 Time Setting To access the Menu, press MENU select [Time] using the RIGHT/LEFT keys. The Menu provides options to adjust the time settings. Press UP/DOWN to select an option and press RIGHT/LEFT to adjust the setting. Press EXIT to exit the menu (a) Time offset Select auto or manual for GMT offset adjustments.If the Time Offset item is set as ‘Auto’. Both the Date and Time items will be grayed(cannot be set by hand).
PAGE 17
(a) OSD (On Screen Display) Language Select an OSD language. (b) Subtitle Language Select the preferred subtitle language. (c) Audio Language Select the preferred audio language for watching TV channels. If the language is not available, the default program language will be used. (d) Digital Audio Select digital audio output mode. (e) Smartcard info Select the Smartcard info item ,and press the OK key,then the smartcard info is display.Press the EXIT key to return the Option menu.
PAGE 18
4.6 System Setting To access the Menu, press MENU select [System] using the RIGHT/LEFT keys. The menu provides options to adjust the system settings. Press the UP/DOWN key to select an option and press RIGHT/LEFT to adjust the setting. Press EXIT to exit the Menu. (a) Parental Guidance Select the Parental Guidance item and press OK key to enter your password or the default password ‘000000’ , then the Parental Guidance menu is display. Age: Press the RIGHT/LEFT keys to select the age.
PAGE 19
4.7 USB To access the Menu, press the MENU button and select [USB] using the RIGHT/LEFT keys. The menu provides options to playback Music, Photo and Multimedia files. It can support AVI, MP3, WMA, JPEG and BMP formats. The receiver will only support USB device with FAT32 file system. It will not support NTFS file system. (a) Multimedia When a USB device is attached you can select from the Music, Photo or Movie options in this menu using the RIGHT/LEFT keys and OK to select.
PAGE 20
[Big]: Displays the subtitle as big mode. - Subtitle BG: [White]: Displays the subtitle in white background. [Transparent]: Displays the subtitle in transparent background. [Grey]: Displays the subtitle in grey background. [Yellow green]: Displays the subtitle in yellow green background. - Subtitle Font Color: [Red]: Displays Subtitle in red font. [Blue]: Displays Subtitle in blue font. [Green]: Displays Subtitle in green font.
PAGE 21
5 Trouble Shooting Problem Potential Reasons What to do Power is not connected Connect the power The power switch is not on Switch on the power DVB-T or DVB-S2 cable not connected cable is faulty Plug in the DVB-T or DVB-S2 cable Check cable and connections No or incorrect connection with audio cable Connect the audio cable correctly Sound on mute Turn off mute function No or incorrect connection with AV cable Make sure cables are connected correctly The program is a radio program Press
PAGE 22
6 Technical Specifications Item DVB-T Tuner DVB-S2 Tuner Sub Item Parameter Input Frequency 174～800MHz UHF & VHF RF Input Level -25~-85dBm IF Bandwidth 7MHz and 8MHz Modulation QPSK, 16QAM, 64QAM lnput frequency 950~2150 MHz, Symbol Rate 2~45MB/S Band SCPC&MCPC receivable from C/Ku band satellites QPSK,8PSK Demodulation Decoder Format Video Audio USB2.0 Power MPEG4 AVC/H.264 HP@L4 MPEG2 MP@ML/HL 576P, 720P,1080i,1080P 4:3, 16:9, Auto HDMI(V1.