User's Manual

ManualsBrandsComat Electronic ManualsComputers & AccessoriesWireless Mouse

Table Of Contents

INSTRUCTION MANUAL
- FOR WIRELESS OPTICAL MOUSE

INSTRUCTION MANUAL

FOR WIRELESS OPTICAL MOUSE

Introduction

Single-channel Wireless optical mouse is designed for office employees, because this device

does not need too long connection cables, and it is unnecessary to always keep the rolling ball

clean and tidy. This device make it into reality that several Wireless mice are used in the

same office. The latest Wireless mouse saves energy significantly, and it will let you into

around freely.

Safety Precautions

Warnings This mark indicates topics that could lead to serious injury of

your body or damage of the product if ignored or handled incorrectly.

Warnings

1. Do not attempt to disassemble or alter any part of the product that is not described in this

guide.

2. Do not allow the product to come into contact with water or other liquids. In the event

that water or other liquids enter the interior, immediately unplug the product from the

computer. Continued use of the product may result in fire or electrical shock. Please

consult your product distributor or the closest support center.

3. Do not handle the product to do the plug and unplug operation if your hands are wet.

Otherwise it will cause electrical shock.

4. Do not place the product near a heat source or expose them to direct flame or heat.

5. Never place the product close to equipment generating strong electromagnetic fields.

Exposure to strong magnetic fields may cause malfunctions or corrupt data.

Packing list

1 Wireless

optical mouse

1 receiver

2 AAA Ni-MH

rechargeable

batteries

1 CD-ROM for

drive program

and instructions

1 USB-PS/2

adaptor (Combo

type only)

(Illustrations only. See physical parts for details.)

System Requirements

Summary of content (6 pages)

PAGE 1
INSTRUCTION MANUAL FOR WIRELESS OPTICAL MOUSE Introduction Single-channel Wireless optical mouse is designed for office employees, because this device does not need too long connection cables, and it is unnecessary to always keep the rolling ball clean and tidy. This device make it into reality that several Wireless mice are used in the same office. The latest Wireless mouse saves energy significantly, and it will let you into around freely.
PAGE 2
1. Computer Model iMAC or iBook IBM PC/AT Compatible, Power Macintosh, PowerBook, 2. OS Windows 98 Second Edition, Windows Millennium Edition (Windows ME), Windows 2000, Windows XP 3. Interface USB/PS2 Installing the batteries The Wireless optical mouse uses two rechargeable AAA Ni-MH batteries for power supply: 1. Open the battery compartment lid. 2. Insert the two rechargeable AAA Ni-MH batteries. For correct installation, see the illustration on the bottom cover. 3.
PAGE 3
. Then press the code connection button on the mouse, and the code connection LED indicator on the mouse will light up once, and while moving the mouse, the "RCV" LED indicator on the receiver will flash when the mouse works, which indicates that the connection is normal. Note: After replacing the batteries or when using the mouse for the first time, repeat Step 2 and 3.
PAGE 4
Checking the battery level On the bottom of the mouse there is a code connection indicator (RCV). When the LED indicator is on, it tells the user that the batteries must be replaced or recharged. (During normal use, the LED indicator is off.) Note: In case that the LED indicator does not light up when the batteries are used up, replace the batteries.) Recharging 1. A battery charger for placing on the receiver is designed by us.
PAGE 5
4. Reconnect the codes (of the mouse and the receiver). Misuse of the mouse The reason for misuse of the mouse is that the mouse automatically encodes the codes when replacing the batteries. In the event that your PC is operated with another mouse, reconnect the codes. In case that several mice are used in the same room, the mice cannot be detected. The root cause for the problem is multiplex refreshing failure. Take the following actions to avoid such problem: 1.
PAGE 6
interference received, and (2) This device must accept any interference receiver , including interference that may cause undesired operation. Caution: Any change or modification will void the FCC authorization.