User's Manual

ManualsBrandsComat Electronic ManualsElectronics2.4G Receiver

2.4G WIRELESS MOUSE

SPECIFICATIONS

Part 1.0:General features

− Full size RF multimedia keyboard

− Totally Wireless freedom

− 2.4GHZ GFSK technology

− 32channels in hopping with 2 group form 2.402GHZ-2.480GHZ

− 800dpi/1200 dpi./1600dpi Optical precisio

− 3 level power saving mode for mouse

− 3D/3KEY Optical Mouse

− Low battery indicator

Part 2.0:physical characteristics

Mechanical performance

Operating force of mouse buttons 60±15gf

Operating force of Browser switches 60±15gf

Operating force of wheel scrolling 20±10gf

Buttons

Mouse: 3buttons with scrolling wheel,

Receiver: NO connect button

Weight:

Mouse : 55.2±10 g (battery included)

Receiver :1.5±0.5g

Part 3.0:Electrical Specification

Interface :USB 1.1

Sensor report rate on mouse: 3000times per second

Operation angle :360 degrees

Operation distance:6-10meter for mouse

Sensor ; pixart Optical sensor paw3204

Receiver power requirement:5V dc from USB port

RF frequency: 2.4ghz (2.402~2.480ghz)

RF modulation :GFSK

Hopping type :fhss(frequency hopping spreadSpectrum)

RF channel : 32channels IS hopping with 2group for

2.402GHZ-2.480GHZ

ID numbers: 4bits ID number(16777216 combinations)

RF bandwidth:1Mhz

RF output power: 0dBm

Resolutions : 800dpi/1200 dpi./1600dpi.

Sensor tracking speed : 28inches/second

Battery

Battery type:two AAA 650mah NI-MH for mouse

Battery consumption :

Mouse:Operating Mode :≤10MA

Sleep mode 1: ≤0.3MA

Sleep mode 2: ≤100UA

Part 5.0 System Requirement

Windows 2000or Windows Xp. Windows ME

.Vista WIN7 WIN10

REV

：

1.00

CM9037G

Summary of content (2 pages)

PAGE 1
2.4G WIRELESS MOUSE SPECIFICATIONS Part 1.0:General features − Full size RF multimedia keyboard − Totally Wireless freedom − 2.4GHZ GFSK technology − 32channels in hopping with 2 group form 2.402GHZ-2.480GHZ − 800dpi/1200 dpi./1600dpi Optical precisio − 3 level power saving mode for mouse − 3D/3KEY Optical Mouse − Low battery indicator Part 2.0:physical characteristics CM9037G Part 3.0:Electrical Specification Interface :USB 1.
PAGE 2
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.