Technical Specs

ManualsBrandsComarch ManualsElectronicsComarch BLE Module

COMARCH BLUETOOTH

LOW ENERGY MODULE

CBM001

TECHNICAL SPECIFICATION

Summary of content (9 pages)

PAGE 1
COMARCH BLUETOOTH LOW ENERGY MODULE CBM001 TECHNICAL SPECIFICATION
PAGE 2
Version: Department: Last Modification: Author: 1.01 IoT 2016-12-13 Kamil Chwałek Document version Date Author Comment 0.1.1 2015.10.29 K.Chwalek Draft 0.1.2 2015.12.10 K.Chwałek Draft – second revision 1.0.0 2015.12.16 K.Chwałek First version 1.0.1 2016.12.13 K.Chwałek Second version, PCB verified, certification ongoing TABLE OF CONTENTS 1. 2. 3. 2 GENERAL DESCRIPTION__________________________________________________________________________3 1.1.
PAGE 3
Version: Department: Last Modification: Author: 1.01 IoT 2016-12-13 Kamil Chwałek 1. GENERAL DESCRIPTION Model number: CBM001 1.1. Components:  application processor - CSR1012 microcontroller with integrated BT transceiver  chip antenna 1.2. Mechanical specification:  dimension 17.5 mm x 11 mm x 2.4 mm  weight 0.65 g 1.3. Radio specification:  Bluetooth 4.1 Low Energy  Device Class 1   Receive sensitivity: -92.5 dBm  Frequency range: 2.4 GHz to 2.
PAGE 4
Version: Department: Last Modification: Author: 1.01 IoT 2016-12-13 Kamil Chwałek  Peak: 24 mA @ 3V 1.4. Physical Interfaces  I2C  Up to 12 digital PIOs  3 analogue AIOs  UART 1.5. Dimensions Fig.
PAGE 5
Version: Department: Last Modification: Author: 1.01 IoT 2016-12-13 Kamil Chwałek 1.6. Pin assignment 21 Edge connectors with pads 0.6 x 0.6 mm each.  Pin  Name  Pin function Description  1  Vbatt  Power Power supply 1.8-3.
PAGE 6
Version: Department: Last Modification: Author: 1.01 IoT 2016-12-13 Kamil Chwałek 1.7. BLE module placement As shown at Fig.2 the BLE module should be placed on the corner of host PCB. If there is no possibility, BLE module should be placed at least at the bottom edge of host PCB with no ground area in front of the antenna. Fig.
PAGE 7
Version: Department: Last Modification: Author: 1.01 IoT 2016-12-13 Kamil Chwałek 2. CHARACTERISTICS 2.1. Absolute Maximum Ratings Rating Min Max Unit Storage temperature -40 85 °C Power supply voltage - 3.6 V 2.2. Recommended Operating Conditions Operating Condition Min Typ Max Unit Operating temperature range -30 - 85 °C Vbatt 1.8 - 3.6 V 2.3.
PAGE 8
Version: Department: Last Modification: Author: 1.01 IoT 2016-12-13 Kamil Chwałek 2.4. Signal measurements at 1m TX power level Measured according to iBeacon specification [dBm] 0 -80 1 -77 2 -71 3 -64 4 -62 5 -59 6 -56 7 -53 3. CERTIFICATIONS / ENVIRONMENTAL INFORMATION 3.1. CE ongoing  ETSI EN 300 328 V1.8.1  EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 FCC standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 3.2.
PAGE 9
Version: Department: Last Modification: Author: 1.01 IoT 2016-12-13 Kamil Chwałek 3.3. The correct disposal of electrical and electronic equipment After end of life, this product cannot be thrown out with municipal waste. For more information about how and where recycling of this product is possible, please contact dealer or supplier. FCC Statement This device complies with part 15 of the FCC Rules.