User's Manual

Operation instructions

1. Inserting the battery: Open battery compartment on the side of figure

with screwdriver. Lift off the door. Using the battery connector inside

the compartment, snap in a 9-volt battery door.

2. To turn the walkie talkie on: move the Vol. switch located on the

bottom of the unit to ON position. Adjust the Vol. Switch

till you hear

a low hissing background noise

which indicates the unit is working

properly.

3. To transmit to another relative walkie talkie: Repeat the same act as

above. Put it on your head when you speak to .

4. To turn the walkie talkie off: Move the Vol. switch the Off position,

This maintains the battery life.

PAGE 1
Operation instructions 1. Inserting the battery: Open battery compartment on the side of figure with screwdriver. Lift off the door. Using the battery connector inside the compartment, snap in a 9-volt battery door. 2. To turn the walkie talkie on: move the Vol. switch located on the bottom of the unit to ON position. Adjust the Vol. Switch till you hear a low hissing background noise which indicates the unit is working properly. 3.
PAGE 2
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.