2.
.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION BATTERY SAFETY INSTRUCTION CAUTION: To reduce the risk of fire or injury to persons, read and follow these instructions: 1. Use only the following type and size of handset batteries: cordless Telephone Batteries DC3.6V, 5 50mAh, Ni-MH AAA size Batte ry pack. 2. Do not dispose of the battery in a fire. The cell may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the battery.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION INSTALLATION PRECAUTIONS 1. 2. 3. 4. Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network inte rface. Use caution when installing or modifying telephone lines.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver needed. • Consult the dealer of an experienced radio / TV technician for help.
2.
2.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Checking the Packing Contents Make sure you have received the following items in the package.
2.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Setting Up the Base Unit Choose the Base Unit Location Before choosing a location for your phone, read the important safety instruction and Installation precautions.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Preparing the Battery Pack How to install the Ni-MH Battery l Remove the battery compartment cover of the Handset by sliding it down. l Connect the battery plug along slot into the Handset's battery connector l Insert the Ni-MH battery pack into the battery compartment. l Replace the battery compartment cover by sliding it up towards the Handset. Note : The Ni -MH battery must be fully charged at least 1 4~16 hours before initial use.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Initialize the Handset to the Base unit (ID setting) To initialize the handset to the base unit, perform the following: simultaneously push and hold the PAGE key on the base unit and the FLASH key on the handset until “Register” appears on the display. The unit will beep once to indicate registration is complete (ID data is transmitted to Handset by RF part of base unit.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Telephone Operations Basic Features Receiving a call 1. The handset rings and the following screen appears: (The in-use LED on the base unit flashes) 2. Press TALK on the handset. 3. When you finish the call, press TALK. 11:15 AM 12/06 NEW 01 TOTAL00 C a l l 05 MIN 02 SEC T a l k V ol:M e dium Note: When return the handset to the base unit, handset will automatically return to standby mode. Making a call 1. 2. 3. Or 1. 2. 3.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Paging call To locate the handset, press PAGE on the base unit. The handset beeps for 60seconds. The following LCD appears : 11:15 AM 12/06 NEW 00 TOTAL 25 Note : To turn off paging beep, press TALK on the handset. P a g i n g Flash function Use the button to activate custom calling services such as call waiting or three -way Calling (*Special subscription from your local telephone company required).
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Extension in use The extension In Use feature prevents accidental interruption of ongoing telephone conversations. If you attempt to make a call and another phone is in use on line, the handset LCD will display “Ext In Use”. If you press TALK, you hear extension error tone. 11:15 AM 12/06 NEW 00 TOTAL 25 E x t I n U s e Note: if you want to join a conversation on an extension currently in use, Press TALK twice.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Multi Handset Features The phone supports up to 3 handsets. You can purchase additional for use many of this phone’s feature. To initialize the handset to the base unit, repeat the abovementioned procedure. Transferring a call 1. When speaking with an out side call, to transfer a call from the handset, Press INT. 2.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Memory features Your phone stores up to 40 name/numbers in the handset memory(phone number - 20digits, name –16 characters) Note: n Press or to move the desired location. n Press CLR/ * or key to delete one character. If no name and no number is typed, press CLR/* * , then go back to the previous screen. Press MEMO to cancel the function and go back to the standby mode.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Key pad characters Key 1st 2nd 3rd 4th 5th 6th 7th 1 1 2 A B C a b c 2 3 D E F d e f 3 4 G H I g h i 4 5 J K L j k l 5 6 M N O m n o 6 7 P Q R S p q r 8 T U V t u V 8 9 W X Y Z w x 0 * # - $ ( ) 8th th 9 s 7 y z 9 (blank) 0 Editing a phone name and number in memory(only English) 01 1. Press MEMO in standby mode.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Deleting a phone name and number from memory 01 1. Press MEMO in standby mode. M a r k T a y l o r 23 4 0 7 0 3 2. Press or 08 to find a location you want to delete name and number. J o h n S m i t h 5 2 3 0 9 8 4 3. Press CLR/* *. D e l e t e ? 4. Press SELECT to delete. Then the phone will generate confirmation tone. D e l e t e d Note: if an empty location is selected, then the phone will generate error tone.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Call ID feature This phone support. CLID FSK. When the phone rings, the caller ID feature allows you view the caller’s name, number, time and total call count on the handset LCD before you answering your phone. Once the caller ID information is automatically stored. You can dial the displayed number and store the information for memory dialing. Note: you must subscribe to caller ID from your phone company to use this feature.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Reviewing the caller ID list The caller ID information stores up to 40 incoming calls in the handset CID directory. (Number - 20 digits, Name –16 digits, date and time). To review your caller ID name and number in the standby mode of handset, follow the steps below: 1. Press to review the newest call or press to review the oldest call.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Deleting a call from caller ID list 1. Press or to find the name and number you want to delete. 10:10 AM 11/05 NEW 09 RPT 00 J e s s e K i m 347 - 2 7 1 2 10:10 AM 11/05 NEW 09 RPT 00 2. Press CLR/* *. D e l e t e ? 3. Press SELECT to delete. Then the phone will generate confirmation tone. 10:10 AM 11/05 NEW 09 RPT 00 D e l e t e d Deleting all calls from caller ID list 1.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Storing a caller ID number in a memory Preferred Calls: You can assign a Preferred Call which will generate a special ringer sound at the start of the second ring to any welcome caller in the memory. When you are saving the Name and number into the memory add “ * ” mark at the beginning of the name by pressing the 0 button.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Call waiting deluxe feature Call waiting Deluxe is a network feature which provides the customer with various options for the disposition of a new call waiting call. When you receiving call waiting call, you can select the following call waiting deluxe features on the handset. Upon selection the desired option, the desired choice will send the corresponding Flash/DTMF key sequence to the network to enact the chosen function.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Answer When you received call waiting call at talk mode, if you want to make the current call hold, select Answer. In held call state, you can choice following subset mode. When you recei ve a call waiting call at talk mode, 10:10 AM 11/05 NEW 01 RPT 01 M a r t i n K i m 327 - 1 2 1 2 1. Press or to find Answer. 05 MIN 02 SEC A n s w e r 2. Press SELECT to select Answer. Press or to select the option.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Hold When you received call waiting call at talk mode, if you want to make the call waiting call hold, select the Hold. In held call state, you can choice the following subset mode. When you receive a call waiting call at talk mode, 10:10 AM 11/05 NEW 01 RPT 01 M a r t i n K i m 327 -1 2 1 2 1. Press or to find Hold. 05 MIN 02 SEC H o l d 2. Press SELECT to select Hold.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Announcement When you received the call waiting call at talk mode, if you select Announcement, new call given announcement (then disconnected) When you recei ve a call waiting call at talk mode, 10:10 AM 11/05 NEW 01 RPT 01 M a r t i n K i m 327 -1 2 1 2 1. Press or to find Announcement.. 05 MIN 02 SEC A n n o u n c e 2. Press SELECT to select Announcement. Then go to normal talk mode.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Voice mail feature If you subscribe to voice mail service. The voice mail LED is flashing on the handset whenever you have messages waiting in your voice mail box, and then you can access by using the one-touch voice mail key (CLR/* * ). This key can be programmed via the User Setting Mode. Your phone stores up to 12 numeric digits plus up to 6 pauses and then the another 8 numeric digits.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION User setting features This unit contains the following User setting features. To access, press the SELECT button at standby mode on the handset, use the or button to find each setting mode. Note: If the key is not pressed for about 30 seconds in the setting mode, it automatically return to standby mode, it is also possible to leave menu by pressing CLR/* *.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Setting Call Waiting CID(CWCID) 1. Press SELECT in standby mode. 2. Press or to select Call Waiting CID On/Off setting mode. 10:10 AM 11/05 NEW 09 RPT 00 C W C I D ♦ 3. Press SELECT. 10:10 AM 11/05 NEW 09 RPT 00 4. Press or to select On or Off. O n 5. Press SELECT to confirm and go back to next user setting feature mode. O f f Then the phone will generate confirmation tone. Setting CID Deluxe 1. Press SELECT in standby mode. 2.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Setting Time and Date It is necessary to set the internal clock time of the phone to display the time in the caller ID display when incoming calls received, if you subscribe to caller ID from your local land line telephone company, the time and date are automatically set when the first call from land line is received. 1. Press SELECT in standby mode. 10:10 AM 11/05 NEW 09 RPT 00 2. Press or to select Time and Date setting mode. 3.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION Selecting Language mode This phone offers English or Spanish languages for your convenience. 1. Press SELECT in standby mode. 2. Press or to select Language setting mode. 10:10 AM 11/05 NEW 09 RPT 00 L a n g u a g e 3. 4. 5. 6. ♦ Press SELECT. 10:10 AM 11/05 NEW 09 RPT 00 Press or to select English or Spanish. Press SELECT to confirm and go back to next user setting feature mode.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION VMWI Off When the VMWI LED is flashing on the handset, you can turn off the VMWI LED by using this feature. 1. Press SELECT in standby mode. 2. Press or to select VMWI Off mode. 3. Press SELECT. 4. Press or 10:10 AM 11/05 NEW 09 RPT 00 V M W I to select Yes or No. O f f ♦ 10:10 AM 11/05 NEW 09 RPT 00 Y e s N o 5. Press SELECT to confirm and go back to next user setting feature mode.
2.4GHz DIGITAL CORDLESS TELEPHONE with CID MODEL: CT-D201 USA V ERSION TROUBLESHOOTING Symptoms No dial tone or phone will not dial out Possible Solution / Cause Check that you have plugged the AC power adapter into a working outlet. Check all telephone cord connections or try another jack. Check to be sure that the phone is set to the correct type of service (tone/pulse) Check the ringer volume select mode (at the off mode the ring not be heard). Refer to user setting feature.