User Manual
Contents Overview ............................................................................................................................................... 3 Connecting the ZEN TM........................................................................................................................... 4 Basic Usage ........................................................................................................................................... 6 PlayStation 4 TM Wireless Controller Pairing ..
Overview The Cronus Zen is compatible with PlayStation 4 TM, Xbox One TM, Nintendo Switch TM PlayStation 3 TM Xbox 360 TM & Windows PC. Please note the following: Xbox 360 Consoles require an officially licensed Xbox 360 wired controller to authenticate the Zen to the Xbox 360 console . The Plug and Play charge cable will not work. Xbox One Consoles require an officially licensed Xbox One controller with a full data micro USB cable to authenticate the Zen to your Xbox One.
Gear Head RGB *EYES” Fully Programmable true color RGB Light bar with 16,777,216 color variations. Useful for adding visual indicators to your scripts and ensuring legacy Cronusmax support. Memory Slot Button (P1 & P2) Press P1 Load next memory slot. Press and hold P2 to enable BT searching mode. Connecting the ZEN TM The Cronus Zen is compatible with PlayStation 4 TM, Xbox One TM, Nintendo Switch TM PlayStation 3 TM Xbox 360 TM & Windows PC.
USB Port Status LED ON/Green: Port in use and active and connected OFF : Controller not enumerated Side Features PROG (Mini USB): Programming port to connect the ZEN TM to the computer. Download and install Zen Studio to configure your Zen with Gamepacks , GPC Scripts and Mouse and Keyboard profiles. Console Port. (Micro USB): used to connect your Zen TM to your Console or to the PC for updating firmware.
Navigation and Pairing Buttons (P1 & P2) Press P1 Load next memory slot. Press and hold P2 to enable BT searching mode. Basic Usage 1. Connect the original controller of the console to the USB port A1. An original controller of the console is required for authentication and for console specific features, such as controller headset, chatpad, touchpad, motion sensor, etc. 2. Connect your preferred controller, Keyboard or mouse to USB port A2 or A3.
PlayStation 4 TM Wireless Controller Pairing - Simply put your PlayStation 4 controller into pairing mode and press the Bluetooth Sync button on your ZEN device. Step by Step Instructions below. 1. Ensure your wireless PlayStation 4 controller is off. 2. Place your PlayStation 4 controller into Bluetooth pairing mode by holding the SHARE and HOME buttons for 5 seconds or until the light bar flashes WHITE. 3. Now press the Bluetooth pairing button on the ZENTM device.
6. 7. If your controller is not connected, remove the batteries then re-insert them and repeat the process above Xbox One TM Wireless Controller Pairing - To connect a non-Bluetooth Xbox One TM or Xbox One TM Elite Controller, you must use an Xbox One TM Wireless Adapter (sold separately). Connect the Xbox One TM controller via a wired connection first. Then remove the wired connection and plug the Xbox One TM Wireless Adapter into your ZENTM device. Step by Step Instructions below. 1.
SwitchTM Pro Wireless Controller Pairing - Simply put your SwitchTM Pro Controller into sync mode and press the Bluetooth Sync button on your ZEN TM device. Step by Step Instructions below. 1. Ensure your ZEN TM device is plugged into the SwitchTM Dock. 2. Ensure your wireless SwitchTM Pro Controller is off. 3. Place your SwitchTM Pro Controller into Bluetooth pairing mode by pressing the SYNC button at the top for a few seconds. 4.
7. You are now connected to the ZEN TM device and ready to use your Wii UTM Pro Controller wirelessly. Joy-ConTM Wireless Controller Pairing - Simply put your Joy-ConTM controller into sync mode and press the Bluetooth Sync button on your ZEN TM device. Step by Step Instructions below. 1. Ensure both Joy-ConTM controllers are off. 2. Place your LEFT Joy-ConTM controller into Bluetooth pairing mode by pressing the SYNC button until the player LED’s on it begin to cycle. 3.
Connecting Your ZEN to a PC Gamepacks, GPC Scripts, Mouse and Keyboard profiles and Macros are created, downloaded are programmed using Zen Studio. Programming, Configuring and Updating 1. Download and install Zen Studio 2. Connect the Zen PROG port to computer with the provided micro-USB cable: The first time the Zen is connected to the computer, the computer will detect a new USB device and automatically install the device drivers. 3. Run Zen Studio, the software should automatically detect your Zen.