pg. 1/104 Table of Contents UPDATING THE SWITCH UP™ DEVICE...................................................3 MODE ACTIVATION.............................................................................6 CONTROLLER SUPPORT.......................................................................8 CONTROLLER CONVERSION TABLE....................................................9 RESET BUTTON MAPPING...............................................................10 PAIRING A PS5™ CONTROLLER (BLUETOOTH)...........
pg. 2/104 ANIMAL CROSSING™ MODE OVERVIEW...............................................65 ANIMAL CROSSING™ MODE ACTIVATION.........................................65 MENU MODE.................................................................................65 ANALOG STICK DEADZONE.............................................................66 EASY FISHING..............................................................................67 EASY NET..................................................................
pg. 3/104 SWITCH UP™ GAME ENHANCER FIRMWARE VERSION 2.1.8 RELEASE DATE (MM/DD/YYYY) 10/05/2021 UPDATING THE SWITCH UP™ DEVICE Power up your game with the SWITCH UP™ Game Enhancer device. Before using the Switch Up™ device, it is IMPORTANT to make sure that your device is updated with all of the latest features. Download the Collective Minds™ Updater software below and use the application to update your Switch Up™ device to the latest firmware version.
pg. 4/104 STEP 3: On the Firmware Selection screen simply click Continue. STEP 4: Your Switch Up™ is now ready to be updated. Click on Begin Update to start the process. (This DOES NOT represent the version number you will be updating to. Also, DO NOT select “2.0.3-rc.
pg. 5/104 STEP 5: The Switch Up™ device will now begin receiving the latest update. DO NOT remove your switch device while the update is in progress. STEP 6: When you see "Update Completed" you can safely remove your Switch Up™ device from your computer and begin enjoying it. If you accidentally selected “2.0.3-rc.5+tournamentstick”: 1. Unplug the Switch Up™. 2. While holding both the Mode Selector and Bluetooth Pairing buttons together, plug your Switch Up™ back into your PC or Mac. 3.
pg. 6/104 MODE ACTIVATION BEFORE YOU CONNECT THE SWITCH UP™ DEVICE TO THE SWITCH™ VIA THE DOCK OR AN OTG CABLE... YOU MUST FIRST NAVIGATE TO THE SWITCH™ "SYSTEM SETTINGS". NAVIGATE DOWN TO "CONTROLLERS AND SENSORS". SET THE "PRO CONTROLLER WIRED COMMUNICATION" OPTION TO "ON". Not doing so will result in either an "Error Code 2011-0301" or improper controls and a lack of rumble.
pg. 7/104 MODE ACTIVATION Your controller must be connected/paired to the Switch Up™ BEFORE cycling through modes. PRESS & RELEASE the MODE SELECTOR to cycle through the 7 MODES: Standard Mode (White LEDS) for any game Pokémon™ (Yellow & Teal LEDS Pokémon™ Sword and Shield. ) for Animal Crossing™ (Green & Blue LEDS Animal Crossing™: New Horizons. ) for Macro Recorder (Purple & Orange LEDS Macro Recording in any game. Fortnite™ (Teal & Purple LEDS Fortnite™ Battle Royale.
pg. 8/104 CONTROLLER SUPPORT The Switch Up™ device SUPPORTS OFFICIAL 1ST PARTY Joy-Con™ / Switch™ Pro / Wii U™ Pro / Xbox® Series™ / Xbox® One™ / Xbox® 360™ / PlayStation® 5 / PlayStation® 4 / PlayStation® 3 controllers. 3rd party controllers, regardless of whether they are officially licensed, are UNSUPPORTED! The Switch™ console sees the Switch Up™ device as a SINGLE Pro Controller; hence your game needs to have Switch™ Pro Controller support.
pg.
pg. 10/104 RESET BUTTON MAPPING This ONLY applies to Switch Up® MODS. It is NOT an issue when using Standard Mode. For MODS to function correctly, it is important to RESET your Button Mappings from the “Change Button Mapping” menu in your Nintendo® Switch™ System Settings, under Controllers and Sensors. How to reset your Button Mapping: 1. Navigate to System Settings and Controllers and Sensors. 2. Navigate to Change Button Mapping. 3.
pg. 11/104 PAIRING A PS5™ CONTROLLER (BLUETOOTH) PlayStation® 5 Wireless Controller Pairing - Simply put your PlayStation® 5 controller into pairing mode and press the Bluetooth Sync button on your Switch Up™ device. Step by step instructions below: 1. Ensure that your Switch Up™ device is plugged into the Switch™ via the Dock or an OTG cable. 2. Ensure that your wireless PlayStation® 5 controller is off. 3.
pg. 12/104 PAIRING A PS4™ CONTROLLER (BLUETOOTH) PlayStation® 4 Wireless Controller Pairing - Simply put your PlayStation® 4 controller into pairing mode and press the Bluetooth Sync button on your Switch Up™ device. Step by step instructions below: 7. Ensure that your Switch Up™ device is plugged into the Switch™ via the Dock or an OTG cable. 8. Ensure that your wireless PlayStation® 4 controller is off. 9.
pg. 13/104 PAIRING A PS3™ CONTROLLER (BLUETOOTH) PlayStation® 3 Wireless Controller Pairing - Connect the PlayStation® 3 controller via a wired connection first. Then remove the wired connection and your PlayStation® 3 controller will automatically pair with the Switch Up™ device. Step by step instructions below: 1. Ensure that your Switch Up™ device is plugged into the Switch™ via the Dock or an OTG cable. 2. Plug your PlayStation® 3 controller into your Switch Up™ device.
pg. 14/104 PAIRING AN XBOX® ONE™ CONTROLLER (BLUETOOTH) Xbox® One™ Wireless Bluetooth Controller Pairing Simply put your Xbox® One™ controller into sync mode and press the Bluetooth Sync button on your Switch Up™ device. This method WILL NOT work for the Xbox® Wireless Controller (Model 1914, Series™ X/S), older Xbox® One™ controllers (1537, 1697), or the Elite Series 1 or 2. Step by step instructions below: 1. Ensure that your Switch Up™ device is plugged into the Switch™ via the Dock or an OTG cable. 2.
pg. 15/104 PAIRING AN XBOX® ONE™/SERIES™ CONTROLLER (ADAPTER) Xbox® One™/Series™ Wireless Controller With Adapter Pairing An official Xbox® Wireless Adapter (sold separately) is the recommended method for connecting ALL Xbox® One™ / Series™ controllers to the Switch Up™ device. However, for the following Xbox® controllers, the adapter is REQUIRED to connect wirelessly: Non-Bluetooth Xbox® One™ Controller (Models 1537, 1697). Xbox® Wireless Controller (Model 1914, Series™ X/S).
pg. 16/104 2. Plug your Xbox® controller into your Switch Up™ device. It will vibrate to indicate that it is paired to your Switch Up™ device. 3. Now remove the wired connection, and your Xbox® controller’s HOME button will begin to flash. 4. Plug the Xbox® Wireless Adapter into your Switch Up™ device. 5. Within a few seconds the Xbox® Wireless Adapter’s LED will go WHITE and your Xbox® controller’s HOME button will stay solid indicating that pairing is complete. 6.
pg. 17/104 PAIRING AN XBOX® 360™ CONTROLLER (ADAPTER) Xbox® 360™ Wireless Controller With Adapter Pairing - To connect a Xbox® 360™ Wireless Controller you must use an Xbox® 360™ Wireless Gaming Receiver (sold separately). Connect the Xbox® 360™ Wireless Gaming Receiver to the Switch Up™ device. Now sync with your Xbox® 360™ Wireless Controller. Step by step instructions below: 1. Ensure that your Switch Up™ device is plugged into the Switch™ via the Dock or an OTG cable. 2.
pg. 18/104 PAIRING A SWITCH™ PRO CONTROLLER (BLUETOOTH) Switch™ Pro Wireless Controller Pairing - Simply put your Switch™ Pro Controller into sync mode and press the Bluetooth Sync button on your Switch Up™ device. Step by step instructions below: 1. Ensure that your Switch Up™ device is plugged into the Switch™ via the Dock or an OTG cable. 2. Ensure your wireless Switch™ Pro Controller is off. 3.
pg. 19/104 PAIRING A WII U™ PRO CONTROLLER (BLUETOOTH) Wii U™ Pro Wireless Controller Pairing - Simply put your Wii U™ Pro Controller into sync mode and press the Bluetooth Sync button on your Switch Up™ device. Step by step instructions below: 1. Ensure that your Switch Up™ device is plugged into the Switch™ via the Dock or an OTG cable. 2. Ensure your wireless Wii U™ Pro Controller is off. 3.
pg. 20/104 PAIRING THE JOY-CONS™ (BLUETOOTH) JOY-CON™ Wireless Controllers Pairing - Simply put your Joy-Con™ controller into sync mode and press the Bluetooth Sync button on your Switch Up™ device. Step by step instructions below: 1. Ensure that your Switch Up™ device is plugged into the Switch™ via the Dock or an OTG cable. 2. Ensure that both Joy-Con™ controllers are off. 3.
pg. 21/104 9. Within a few seconds the LED on the Switch Up™ device will be WHITE indicating that pairing is complete and you will feel a strong vibration on the RIGHT Joy-Con™ controller. 10. The player indicators on the Joy-Con™ controller will light up one player indicator LED. 11. You are now connected to the Switch Up™ device and ready to use your Joy-Con™ controllers. 12.
pg. 22/104 XBOX® ONE™ ELITE CONTROLLER SERIES 1 PADDLE MAPPING Please update your Switch Up™ firmware to make this BONUS feature available. To map the Xbox®™ Elite Series 1 Controller PADDLES, the controller MUST have a wired connection to the Switch Up™. This provides a huge advantage in games such as Super Smash Bros™, Fortnite™, and Apex Legends™, as you have 4 PADDLES to play with. STEP 1: Connect the Xbox® One™ Elite Series 1 Controller via a USB data charging cable wired to the Switch Up™.
pg. 23/104 STRIKEPACK™ PADDLE/ACTION BUTTON MAPPING Please update your Switch Up™ firmware to make this BONUS feature available. You can connect a PlayStation® 4 or Xbox® One™ controller with an attached STRIKEPACK™ (sold separately), attached via its included USB cable and wired directly to the Switch Up™. This is a way of gaining PADDLES/ACTION BUTTONS for your Switch™ games. Make sure that both the SWITCH UP™ and STRIKEPACK™ are updated to the latest firmware.
pg. 24/104 CONTROLLER HEADSET SUPPORT Please update your Switch Up™ firmware to make this BONUS feature available while playing WIRED (or wirelessly for Xbox® controllers using an official Xbox® Wireless Adapter). For your convenience, the Switch Up™ device allows for headset support (microphone and audio) additionally through the Xbox® One™/Series™ and PlayStation® 4/5 controller's audio port. This is supported in all modes.
pg. 25/104 OPTIONAL BUTTON SWAP We ONLY recommend using this feature in Standard Mode as it can cause confusion when activating MODS. You can globally swap all 4 face buttons to follow the familiar button geography of Xbox® and PlayStation® that is common in most parts of the world. For example, if you are accustomed to an Xbox®™ controller, you may become confused when B on the screen means A on your controller and vice-a-versa.
pg. 26/104 POKÉMON™ MODE OVERVIEW The SWITCH UP™ POKÉMON™ MODE includes MODS and generators that make tedious tasks in Pokémon™ Sword and Shield a breeze. Unless stated otherwise, it is recommended to stay in Local Communication Mode to ensure that your internet connection or online players DO NOT interrupt any of the MODS. POKÉMON™ MODE ACTIVATION PAIR YOUR CONTROLLER FIRST, then PRESS & RELEASE the MODE SELECTOR to cycle through the MODES: Pokémon™ (Yellow & Teal LEDS Pokémon™ Sword and Shield.
pg. 27/104 LOAD TIME ADJUSTABLE Due to some consoles having longer load times than others, some MODS may function incorrectly because it misses inputs. Here are a couple of examples of this issue taking place: Not getting on your bike when you take a Flying taxi to Bridge Field for “Shiny Egg Chaining”. Getting stuck in the Switch Pokémon™ using the “Max Raid Watt Generator”. The game doesn’t restart properly using “Rare Den Farming”. Etc.
pg. 28/104 LANGUAGE SELECTION Some MODS need to act differently from language to language. Please select your language for all of the MODS to function correctly. Here are a couple of examples of MODS that need specific actions for different languages: Shiny Egg Chaining and Egg Farming in Italian. Rare Den Farming in German. Etc. Follow these steps to select your in-game language. STEP 1: Enter MENU MODE. (Hold you feel a rumble).
pg. 29/104 ANALOG STICK DEADZONE Some controllers have Analog Stick Drift causing issues during game play. Here are a couple of examples of this issue taking place: Your cursor in the Town Map drifts. Your character starts looking in a different direction when you stop moving. Etc. If you are experiencing any of the issues above, or something similar, you can use the Analog Stick Deadzone to improve your analog sticks in Pokémon™ Mode. STEP 1: Enter MENU MODE. (Hold you feel a rumble).
pg. 30/104 SINGLE RELEASE POKÉMON™ This MOD allows you to quickly release Pokémon™ one at a time from your Box. STEP 1: WARNING: SAVE BEFORE USING THIS MOD in-case something goes wrong! STEP 2: Go to your Box screen. STEP 3: Make sure that your Selection Mode is set to "Select", and your Box View is set to "Sort Pokémon™". STEP 4: Enter MENU MODE, then TAP . You will feel a heavy rumble and the TEAL LED will begin flashing.
pg. 31/104 BOX RELEASE POKÉMON™ This MOD will release entire boxes of Pokémon™. STEP 1: WARNING: DO NOT have any Pokémon™ that you want to keep in the boxes, or they will be released! SAVE BEFORE USING THIS MOD in-case something goes wrong! STEP 2: Go to your Box screen. STEP 3: Make sure that your Selection Mode is set to "Select", and your Box View is set to "Sort Pokémon™". STEP 4: Navigate to a box that is COMPLETELY FULL OF POKÉMON™ (NO EGGS) THAT YOU WANT TO RELEASE.
pg. 32/104 STEP 5: Enter MENU MODE, then TAP . Your controller will start to rumble and the TEAL LED will begin flashing. DO NOT turn off or change the input of your TV/Monitor, this will throw off the releasing! STEP 6: Navigate through any additional boxes that you want to release using & (XB: LB & RB / PS: L1 & R1) (REMEMBER THAT EVERY BOX MUST BE COMPLETELY FULL).
pg. 33/104 SHINY EGG CHAINING This MOD will chain for eggs for as long as possible, from the "Bridge Field" Pokémon™ Nursery in the Wild Area. This MOD will automatically change the following in-game Options: Text Speed: Fast. Send to Boxes: Manual. Give Nicknames: Don't Give. Casual Controls: Off STEP 1: From the pause screen, ensure that: "TOWN MAP" is in the Bottom Left. "OPTIONS" is in the Bottom Right.
pg. 34/104 STEP 2: You MUST have unlocked the Rotom Bike. STEP 3: Take a Flying taxi to "Bridge Field". STEP 4: Make sure that you have setup the Pokémon™ Nursery to make Eggs. Both Pokémon™ need to be in the Same Egg Group or use any Pokémon™ and a Ditto. The first Pokémon™ in your party MUST be a Pokémon™, not an Egg.
pg. 35/104 STEP 5: It is recommended to: Set the first Pokémon™ in your party to have the ability "Flame Body", halving the Egg hatching time. Receive the Oval Charm, increasing the chance of Eggs being found at the Nursery. (This does not affect hatch time). Set the first Pokémon™ in the Nursery to a local one and the other to a Foreign Pokémon™, increasing the Shiny chance (Masuda Method). Receive the Shiny Charm, increasing Shiny chance.
pg. 36/104 EASY CYCLE This MOD is to be used outside of the Wild Area and will continue to bike in circles until it is stopped. This can be useful for both hatching eggs, gaining friendship using the Soothe Bell, and more! STEP 1: Start by getting on the Rotom Bike in a safe location, away from any Pokémon™ encounters and with enough room to bike in circles. Note: If you are planning to turn off your TV/Monitor, do so now; otherwise, the HDMI handshake will interrupt the mod.
pg. 37/104 SHINY SOFT RESET CHAINING This MOD will make the process of Soft Resetting for shiny pokémon™ much easier. NOTE: This MOD has replaced the original Watt Generator, but you can still use the Max Raid Watt Generator for significantly more Watts. This MOD will automatically change the following in-game Options: Text Speed: Fast. Casual Controls: Off STEP 1: From the pause screen, ensure that "OPTIONS" is in the Bottom Right.
pg. 38/104 STEP 2: Stand in front of the object that triggers the Pokémon™ encounter, close enough to interact with it. STEP 3: Enter MENU MODE, then TAP (XB: LB / PS: L1). You will feel a heavy rumble, the TEAL LED will begin flashing and the MOD will take over from here. The MOD will save the game before chaining. STEP 4: Your character will now encounter the Pokemon™. TAP or (XB: or / PS: or ) if you encounter the shiny Pokemon, this will stop the MOD (Light Rumble).
pg. 39/104 MAX RAID WATT GENERATOR This MOD will generate a massive amount of Watts for as long as possible, from any Den that you have used a Wishing Piece on. It will generate even more Watts if you have already beaten the game. This MOD will automatically change your in-game Options: Text Speed: Fast. Casual Controls: Off This MOD will repeatedly change your console's date and time setting! You will need to set it back to the accurate setting when you are finished using the MOD.
pg. 40/104 STEP 2: From the pause screen, ensure that "OPTIONS" is in the Bottom Right. Then check that you are in “Local Communication Mode” to avoid griefing other players. STEP 3: Use a Wishing Piece in a Den and stand in front of it but DO NOT interact with it. Note: If you are planning to turn off your TV/Monitor, do so now; otherwise, the HDMI handshake will interrupt the mod. Before turning your TV/Monitor back on, stop the mod. STEP 4: Enter MENU MODE, then TAP (XB: LT / PS: L2).
pg. 41/104 RARE DEN FARMING This MOD allows you to see what the result of using a Wishing Piece would be, without actually using it. This allows you to farm for getting the darker pink Max Raids. This MOD will automatically change the following in-game Options: Text Speed: Slow. STEP 1: From the pause screen, ensure that "OPTIONS" is in the Bottom Right. STEP 2: You MUST have Wishing Pieces. If you DO NOT have enough, you can purchase them using Watts from the Watt Traders.
pg. 42/104 STEP 3: Walk up to a used Den and be close enough to interact with it. However, DO NOT interact with it afterwards and if you do by mistake, say NO. STEP 4: Enter MENU MODE, then TAP (XB: RB / PS: R1). You will feel a heavy rumble and the TEAL LED will begin flashing. STEP 5: This MOD will change your game settings, then use the Wishing Piece to see what the result of using it would be.
pg. 43/104 STEP 6: Your character will use the Wishing Piece, then suspend the game. Once this happens: If you get a good result as shown below, TAP / PS: or or (XB: or ), which will stop the MOD (Light Rumble) or… ...to try again instead, TAP or (XB: or / PS: ). To double check what the result was, PRESS the HOME button (XB: HOME or Xbox® button / PS: PS button).
pg. 44/104 AUTO CONFIRM This MOD will quickly and continuously tap ZR (RT on XB1 or R2 on PS4). This can be used in many different ways, see Tips & Tricks below for examples. Note: If you are planning to turn off your TV/Monitor, do so now; otherwise, the HDMI handshake will interrupt the mod. Before turning your TV/Monitor back on, stop the mod. STEP 1: Enter MENU MODE, then TAP (XB: RT / PS: R2). You will feel a heavy rumble, the TEAL LED will begin flashing and the MOD will take over from here.
pg. 45/104 STEP 4: Walk up to one of the Digging Duo Brothers, enter MENU MODE, then TAP NOTE: (XB: RT / PS: R2). To stop Auto Confirm, move the analog sticks, or press any button. You will feel a light rumble and the MOD will be deactivated.
pg. 46/104 AUTO SPIN This MOD will make your character spin, easily evolving Milcery into Alcremie. ACTIVATION: Make sure you are OFF your bike. Enter MENU MODE, then PRESS to spin Counter Clockwise or PRESS to spin Clockwise. You will feel a heavy rumble, the TEAL LED will begin flashing and the MOD will take over from here. To stop spinning, TAP (XB: PS4: ) or TAP (XB: VIEW / PS: SHARE). You will feel a light rumble and the MOD will be deactivated.
pg. 47/104 AUTO ROTO LOTO (MASTER BALL FARMING) This MOD will continuously use the Loto-ID at the “Motostoke” PokéCenter™ to earn Master Balls, Rare Candies, PP Max, PP Up, and Moo Moo Milk. This MOD will automatically change your in-game Options: Text Speed: Fast. Casual Controls: Off This MOD will repeatedly change your console's date and time setting! You will need to set it back to the accurate setting when you are finished using the MOD.
pg. 48/104 STEP 2: From the pause screen, ensure that: "TOWN MAP" is in the Bottom Left. "OPTIONS" is in the Bottom Right. STEP 3: You MUST use a Wishing Piece on the den to the West of the Motostoke entrance in the East Lake Axewell Wild Area. STEP 4: The Flying Taxi locations in “Motostoke” and “East Lake Axewell” MUST be unlocked. Also, you MUST have the Rotom Bike.
pg. 49/104 STEP 5: Travel to Motostoke, and make sure you are outdoors. Note: If you are planning to turn off your TV/Monitor, do so now; otherwise, the HDMI handshake will interrupt the mod. Before turning your TV/Monitor back on, stop the mod. STEP 6: Enter MENU MODE, then TAP (XB: / PS: ). You will feel a heavy rumble, the TEAL LED will begin flashing and the MOD will take over from here. To stop Auto Roto Loto, move the analog sticks, or press any button and it will stop the MOD.
pg. 50/104 BOX SURPRISE TRADE This MOD will automatically Surprise Trade entire boxes of Pokémon™. Nintendo® Online and a stable internet connection is REQUIRED. This MOD will automatically change the following in-game Options: Text Speed: Fast. Casual Controls: Off STEP 1: From the pause screen, ensure that: “POKÉMON” is the second from the Top Left "TOWN MAP" is in the Bottom Left. "OPTIONS" is in the Bottom Right. STEP 2: Open Y-COMM and set your communication mode to Internet.
pg. 51/104 STEP 3: WARNING: DO NOT have any Pokémon™ that you want to keep in the boxes you select, or they will be surprise traded! STEP 4: Go to your Box screen and navigate to a box that is FULL OF POKEMON™ (NO EGGS) THAT YOU WANT TO SURPRISE TRADE. Note: If you are planning to turn off your TV/Monitor, do so now; otherwise, the HDMI handshake will interrupt the mod. Before turning your TV/Monitor back on, stop the mod. STEP 5: Enter MENU MODE, then TAP (XB: / PS: ).
pg. 52/104 EGG FARMING (ADVANCED SHINY CHAINING) This MOD will continuously receive Eggs from the Route 5 Nursery. This MOD will automatically change the following in-game Options: Text Speed: Fast. Send to Boxes: Automatic. Give Nicknames: Don’t give. Casual Controls: Off. STEP 1: From the pause screen, ensure that: "TOWN MAP" is in the Bottom Left. "OPTIONS" is in the Bottom Right. STEP 2: Both Flying Taxi Locations on Route 5 MUST be unlocked (The Camp Site and the Nursery).
pg. 53/104 STEP 3: Travel to the Route 5 Nursery and set it up so the Lady there will have eggs available for you to receive. STEP 4: Your Party must be FULL and CANNOT INCLUDE ANY EGGS. Note: If you are planning to turn off your TV/Monitor, do so now; otherwise, the HDMI handshake will interrupt the mod. Before turning your TV/Monitor back on, stop the mod. STEP 4: Close out of any menu screens. Enter MENU MODE, then TAP (XB: / PS: ).
pg. 54/104 BOX EGG HATCHING (ADVANCED SHINY CHAINING) This MOD will hatch boxes of eggs at the Route 5 Nursery. This MOD will automatically change the following in-game Options: Text Speed: Fast. Give Nicknames: Don’t give. Casual Controls: Off. STEP 1: From the pause screen, ensure that: “POKÉMON” is the second from the Top Left "TOWN MAP" is in the Bottom Left. "OPTIONS" is in the Bottom Right. STEP 2: Both Flying Taxi Locations on Route 5 MUST be unlocked (The Camp Site and the Nursery).
pg. 55/104 STEP 3: Travel to the Route 5 Nursery. STEP 3: Go to your Box screen and navigate to a box that is COMPLETELY FULL OF EGGS THAT YOU WANT TO HATCH. STEP 4: Make sure: 1. Selection Mode is set to "Select". 2. Box View is set to "Sort Pokémon™". 3. Your Party is empty except for ONE Pokémon™. It MUST have the Ability Flame Body or Steam Engine. STEP 5: Enter MENU MODE, then TAP (XB: / PS: ). Your controller will start to rumble and the TEAL LED will begin flashing.
pg. 56/104 STEP 6: Navigate through any additional boxes that you want to hatch using & (XB: LB & RB / PS: L1 & R1) (REMEMBER THAT EVERY BOX MUST BE COMPLETELY FULL OF EGGS). If you only want to hatch one box, do not tap the bumpers. Note: If you are planning to turn off your TV/Monitor, do so now; otherwise, the HDMI handshake will interrupt the mod. Before turning your TV/Monitor back on, stop the mod.
pg. 57/104 TAP to increase the hatch timing. You will feel a heavy rumble. TAP to decrease the hatch timing. You will feel a light rumble. Base Egg Step Groups based on Green Player LEDS: 1 (FLASHING) 1280 Steps 1 2560 Steps 2 (FLASHING) 3840 Steps 2 5120 Steps 3 (FLASHING) 6400 Steps 3 7680 Steps 4 (FLASHING) 8960 Steps 4 10240 Steps For example: If you are chaining for a Shiny Scorbunny, Grookey, Sobble, Growlithe, Gastly, etc.
pg. 58/104 APRICORN FARMING This MOD will endlessly shake trees to pick up berries and apricorns (Apricorns only available in Idle of Armour DLC). First you will need to activate the Y-COMM Skip: (This mechanic may get patched in the future, and players have been penalized in the past for using a similar method that utilized VS Battles) STEP 1: Un-dock your switch (You don’t need to use the Switch Up to activate the Y-COMM Skip). STEP 2: Open Y-COMM and connect to the Internet.
pg. 59/104 Make sure you setup the Switch Up to Pokémon Mode after activating the Y-COMM Skip. STEP 1: Go to your console’s "System Settings", then "System" and set "Region" to "The Americas" or any region that has a date format of "Month / Day / Year". Now go to the "Date and Time" settings and change the following settings: Synchronize Clock via Internet: Off. Date and Time to January 1st of next year (If the year is 2019, set Jan 1st 2020, etc).
pg. 60/104 Note: If you are planning to turn off your TV/Monitor, do so now; otherwise, the HDMI handshake will interrupt the mod. Before turning your TV/Monitor back on, stop the mod. STEP 4: Enter MENU MODE, then TAP (XB: MENU / PS: OPTIONS). You will feel a heavy rumble, the TEAL LED will begin flashing and the MOD will take over from here. STEP 5: To stop Apricorn Farming, TAP (XB: PS4: ) or TAP (XB: VIEW / PS: SHARE). You will feel a light rumble and the MOD will be deactivated.
pg. 61/104 TIP & TRICKS The following are examples of how to use Pokémon™ Mode to perform various actions. Gigantamax™ Farming This will show you how to easily farm for Gigantamax Pokémon™, while also earning some Watts. STEP 1: Use either the “Watt Generator” or the “Max Raid Watt Generator” to earn enough Watts to buy a Wishing Piece from the Watt Traders. STEP 2: Go to a Den that has a chance of finding a Gigantamax Pokémon™. Use the “Den Farming” MOD to get a Rare Den.
pg. 62/104 STEP 2: Take a Flying taxi to "Bridge Field". STEP 3: Walk up to one of the Digging Duo Brothers. STEP 4: Activate “Auto Confirm” to loop receiving items from the Brother until you are satisfied with the amount of Fossils you have. (This will take some time).
pg. 63/104 STEP 5: Go to the scientist name Cara Liss, on Route 6. Stand in front of her. (If you are looking for a specific Fossil Pokémon™, you should sell all Fossils you don’t need before walking up to her). STEP 6: Save now to reduce the amount of Fossils that are actually used during the Shiny Hunt. STEP 7: Activate “Auto Confirm” to loop receiving Fossil Pokémon™ from her. STEP 8: Once you run out of Fossils, stop “Auto Confirm”.
pg. 64/104 Master Ball Farming This will show you how to easily farm for Master Balls, Rare Candy, and other Rare Loto ID items. STEP 1: Use either the “Shiny Egg Chaining” or the “Egg Farming” and “Box Egg Hatching” MODS to get a bunch of extra Pokémon™. STEP 2: Use the “Box Surprise Trade” MOD to replace all of the extra Pokémon™ from Step 1 with Pokémon™ from other trainers. This will increase the chance of receiving items from the Loto-ID.
pg. 65/104 ANIMAL CROSSING™ MODE OVERVIEW The SWITCH UP™ ANIMAL CROSSING™ MODE will help you with your day-to-day life on the Island. With MODS that help you with fishing, running, picking up items, and more; your island experience will be greatly improved!. ANIMAL CROSSING™ MODE ACTIVATION PAIR YOUR CONTROLLER FIRST, then PRESS & RELEASE the MODE SELECTOR to cycle through the MODES: Animal Crossing™ (Green & Blue LEDS Animal Crossing: New Horizons™.
pg. 66/104 ANALOG STICK DEADZONE Some controllers have Analog Stick Drift causing issues during gameplay. Here are a couple of examples of this issue taking place: Your cursor in the Island Map drifts. Your character starts moving on their own, usually in one direction. Etc. If you are experiencing any of the issues above, or something similar, you can use the Analog Stick Deadzone to improve your analog sticks in Animal Crossing™ Mode. STEP 1: Enter MENU MODE. (Hold you feel a rumble).
pg. 67/104 EASY FISHING When the Easy Fishing MOD is active, after you cast your rod, it will automatically catch the fish for you when you get a bite. Make sure that your Controller Vibration is ON. STEP 1: Enter MENU MODE. (HOLD (XB: VIEW / PS: SHARE) until you feel a rumble and the Mode Select LED changes to White. STEP 2: TAP (XB: LB / PS: L1) to toggle the Easy Fishing MOD. You will feel a heavy rumble when activated and a light rumble when deactivated. TAP STEP 3: to exit Menu Mode.
pg. 68/104 pulling up the net for use will be much more convenient. STEP 1: Enter MENU MODE. (HOLD (XB: VIEW / PS: SHARE) until you feel a rumble and the Mode Select LED changes to White. STEP 2: TAP (XB: RB / PS: R1) to toggle the Easy Net MOD. You will feel a heavy rumble when activated and a light rumble when deactivated. TAP to exit Menu Mode. STEP 3: (XB: LS / PS: L3) to open your inventory wheel.
pg. 69/104 You can also PRESS or HOLD your inventory wheel. (XB: RS / PS: R3) to quickly open Once the wheel opens up you can select items using either the left or right analog sticks. The item will be selected once you have chosen an item and you are no longer holding .
pg. 70/104 EASY TURBO / HOLD The Easy Turbo / Hold MOD allows you to select one of three options for each face button, to assist with various gameplay actions. STEP 1: Enter MENU MODE. (HOLD (XB: VIEW / PS: SHARE) until you feel a rumble and the Mode Select LED changes to White. STEP 2: Cycle through the three Turbo MODS on any of the four face buttons , , or . One heavy rumble is Turbo, two rumbles is Hold, three rumbles is Constant Turbo, and a light rumble is back to normal.
pg.
pg. 72/104 MACRO RECORDER MODE OVERVIEW The SWITCH UP™ MACRO RECORDER will record a sequence of button presses or stick movements which can be very useful for repetitive actions or idle generators. Use your imagination and experiment to get the most out of this pack! MACRO RECORDER MODE ACTIVATION PAIR YOUR CONTROLLER FIRST, then PRESS & RELEASE the MODE SELECTOR to cycle through the MODES: Macro Recorder (Purple & Orange LEDS Macro Recording in any game.
pg. 73/104 MACRO RECORDING MODES Using Menu Mode you will be able to select which button the Macro Recorder will use as your record and playback button. It is important to know that there is a limited amount of space on the Switch Up™ to save the recorded Macro. Each Press and Release of a button will take up more space, so use your button press and stick movements sparingly. STEP 1: Enter MENU MODE. (HOLD (XB: VIEW / PS: SHARE) until you feel a rumble and the Mode Select LED changes to White.
pg. 74/104 PLAYBACK AND RECORDING Once you have setup your Macro Recording Mode, you can record and playback any sequence of buttons and stick movements. By default, your Macro Record Mode will be set to HOLD Macro Repeat, so we will be walking through that first. STEP 4: If you have not yet recorded a Macro, you will need to HOLD the Macro Button until you feel a LIGHT RUMBLE. STEP 4a: Press buttons or move the analog sticks to perform the action you want to be able to playback.
pg. 75/104 CLEARING RECORDED MACROS If you no longer want to use the Macro that you have recorded, you can clear it and record again. HOLD the HOME button (XB: HOME or Xbox® button / PS: PS button) and the assigned Macro button for about 1 second. You will feel 2 rumbles, and your Macro will be ready to be re-recorded.
pg. 76/104 FORTNITE™ MODE OVERVIEW The SWITCH UP™ FORTNITE™ MODE for Fortnite™: Battle Royale includes essential MODS to level the playing field with a fighting chance against other platforms. FORTNITE™ MODE ACTIVATION PAIR YOUR CONTROLLER FIRST, then PRESS & RELEASE the MODE SELECTOR to cycle through the MODES: Fortnite™ (Teal & Purple LEDS Fortnite™ Battle Royale. ) for BUTTON LAYOUT Fortnite™ Mode is compatible with the Builder Pro and Combat Pro button layouts.
pg. 77/104 STEP 3: HOLD & TOGETHER for about a SECOND (XB: VIEW & MENU / PS: SHARE & OPTIONS). This will open up a chat window and the MOD will begin to type out instructions. Please wait for it to finish typing. STEP 4: Follow the prompts on the screen and PRESS the button that each action is bound to. If a prompted button is NOT bound (for example, Edit is unbound by default), PRESS SHARE) to skip over it. (XB: VIEW / PS: If you made a mistake and need to go back, PRESS PS: OPTIONS).
pg. 78/104 WEAPON FIRE MODE WEAPON FIRE MODE – QUICK REFERENCE SWITCH MODES: WHILE HOLDING : HOLD until you feel a light rumble for Regular Fire. HOLD until you feel a heavy rumble for Rapid Fire. HOLD until you feel a heavy rumble for Smart Fire. HOLD until you feel a heavy rumble for Dual Fire. REGULAR FIRE: This is the default OFF state. Your weapon will fire as it usually does. SELECTOR: WHILE HOLDING (XB: MENU / PS: OPTIONS), HOLD until you feel a light rumble.
pg. 79/104 DUAL FIRE: Arrange a shotgun in the left slot and a secondary weapon such as a submachine gun (SMG), assault rifle or pistol in the right slot. SELECT THE SHOTGUN, THEN WHILE AIMING DOWN SIGHTS, HOLD ATTACK/FIRE to fire the shotgun and the MOD will automatically switch to and fire your secondary weapon. This way you are dealing additional damage while waiting for that shotgun timer to finish. The MOD will automatically spring back to your shotgun when you RELEASE ATTACK/FIRE.
pg. 80/104 AIM ASSISTING MODE AIM ASSISTING MODE – QUICK REFERENCE CYCLE MODES: WHILE HOLDING (XB: MENU / PS: OPTIONS), HOLD PS: L2) until you feel a rumble indicator. Aim Assist (for the new DEFAULT look controls) (XB: LT / (1 Heavy Rumble). Aim Abuse (for the Advanced Options > Legacy Look Controls > ON controls) (2 Heavy Rumbles).
pg. 81/104 FIRE MODE FIRE MODE – QUICK REFERENCE TOGGLE MODES: Hop Shot: WHILE HOLDING (XB: MENU / PS: OPTIONS), HOLD (XB: RT / PS: R2) until you feel a rumble indicator. Rumble / OFF: Light Rumble). Rapid Crouch Fire: WHILE HOLDING (ON: Heavy (XB: MENU / PS: OPTIONS), HOLD (XB: RB / PS: R1) until you feel a rumble indicator. Heavy Rumble / OFF: Light Rumble). (ON: Hop Shot and Rapid Crouch Fire CANNOT both be active at the same time.
pg. 82/104 ZELDA™ MODE OVERVIEW The SWITCH UP™ ZELDA™ MODE includes MODS that enhance the combat and generators that cut down on the grinding in The Legend of Zelda™: Breath of the Wild. ZELDA™ MODE ACTIVATION PAIR YOUR CONTROLLER FIRST, then PRESS & RELEASE the MODE SELECTOR to cycle through the MODES: Zelda™ Mode (Green LEDS ) for The Legend of Zelda™: Breath of the Wild.
pg. 83/104 MENU MODE You will be using the Menu Mode to change some MOD settings. HOLD (XB: VIEW / PS: SHARE) until the Mode Selector LED turns WHITE. You have entered Menu Mode. While in Menu Mode: TAP (XB: LB / PS: L1) to toggle between the DEFAULT "Infinite Sprint - On Hold" (Light Rumble) and "Infinite Sprint - Always Active" (Heavy Rumble). See the Infinite Sprint section for more information.
pg. 84/104 MASTER CONTROLS MASTER QUICK CONTROL suspends ALL MODS. This is helpful if a MOD is interfering with the in-game menu navigation or another gameplay function. WHILE HOLDING , TAP (XB: MENU / PS: OPTIONS) to SUSPEND / RESUME ALL MODS. (Suspended: Heavy Rumble / Resumed: Light Rumble). MASTER RESET ALL SETTINGS to DEFAULT. HOLD (XB: VIEW / PS: SHARE) until the Mode Selector LED turns WHITE. You have entered Menu Mode.
pg. 85/104 CHANGE JUMP BUTTON You MUST MATCH the "Change Jump Button" mode with your in-game "Change Jump Button" setting for the MODS to function correctly. HOLD (XB: VIEW / PS: SHARE) until the Mode Selector LED turns WHITE. You have entered Menu Mode. While in Menu Mode: TAP (XB: RB / PS: R1) to toggle between the DEFAULT "Change Jump Button: OFF" (Light Rumble) and "Change Jump Button: ON" (Heavy Rumble). This setting is for MATCHING the state of the ingame "Change Jump Button" setting.
pg. 86/104 ENHANCED WEAPON MODE The Enhanced Weapon Mode provides you with significant combat advantages against your foes. You can have one Enhanced Weapon Mode activated at a time. You can still DOUBLE TAP ATTACK (or QUICKLY TAP multiple times in a row) to attack normally, instead of using the Enhanced Weapon Mode. This is useful when you are able to use Flurry Rush after dodging an attack.
pg. 87/104 RAPID SPEAR: With the Spear equipped, HOLD ATTACK to rapidly and continuously attack until you RELEASE ATTACK. To cancel an attack early and dodge in a direction, WHILE MOVING LEFT, RIGHT, FORWARDS OR BACKWARDS, PRESS LS (XB: LS / PS: L3). TOGGLE: WHILE HOLDING , TAP (XB: LB / PS: L1) for Rapid Spear (ON: 1 Heavy Rumble / OFF: Light Rumble).
pg. 88/104 BOW SPIN: With the Great Frostblade/Thunderblade and Bow equipped, you will have the ability to automate the technique of chaining enemies into being stunned by allowing Link to continuously trigger the elementals of the Great Frostblade or Great Thunderblade in a spinning motion. This MOD changes the hitbox of the spin attack to the hitbox of the bow, so you will need to align yourself properly with your enemy. HOLD ATTACK and the MOD will perform the Bow Spin sequence.
pg. 89/104 INFINITE SPRINT INFINITE SPRINT – QUICK REFERENCE TOGGLE INFINITE SPRINT: WHILE HOLDING , PRESS Rumble / OFF: Light Rumble). (XB: RS / PS: R3) (ON: Heavy INFINITE SPRINT: This MOD will take the pain out of traversing Hyrule as it allows Link to endlessly sprint while moving in any direction, without being affected by the in-game stamina. By default, you MUST be HOLDING the SPRINT button to activate Infinite Sprint (Infinite Sprint - On Hold).
pg. 90/104 AUTO HORSE AUTO HORSE – QUICK REFERENCE TOGGLE AUTO HORSE: WHILE LINK IS MOUNTED ON HIS HORSE, WHILE HOLDING (XB: RS / PS: R3) , PRESS (ON: Heavy Rumble / OFF: Light Rumble). AUTO HORSE: This MOD will take the pain out of traversing Hyrule as it will make Link’s horse automatically sprint and it will replenish its stamina before sprinting again. You can pull back on the LEFT ANALOG STICK to stop the horse from sprinting until you either MOVE FORWARD again or PRESS SPRINT.
pg. 91/104 EASY TAME & SOOTHE EASY TAME & SOOTHE – QUICK REFERENCE TOGGLE EASY TAME & SOOTHE: WHILE LINK IS MOUNTED ON HIS HORSE, WHILE HOLDING (XB: LB / PS: L1) , TAP (ON: Heavy Rumble / OFF: Light Rumble). EASY TAME & SOOTHE: This MOD will make Link automatically tame or soothe a horse as quickly as possible, which is an in-game mechanic to build a relationship with the horse for better steering, or for taming a wild horse.
pg. 92/104 HORSE STAMINA REFRESH HORSE STAMINA REFRESH – QUICK REFERENCE TOGGLE HORSE STAMINA REFRESH: WHILE LINKMOUNTED ON YOUR HORSE, WHILE HOLDING (XB: RB / PS: R1) , TAP (ON: Heavy Rumble / OFF: Light Rumble). HORSE STAMINA REFRESH: With the Shield and Bow equipped, this MOD provides you with a 50% chance of resetting your horse's stamina. This MOD will toggle OFF Auto Horse, Infinite Sprint and Easy Tame & Soothe if any of these MODS are active.
pg. 93/104 ARROW GENERATOR This MOD will generate Arrows for as long as possible. It is available after completing "Stranded on Eventide" shrine quest, and then fast travelling to the "Korgu Chideh Shrine". FAIR WARNING: This MOD saves over the first save slot! STEP 1: Ensure that: Options > Camera Sensitivity is set to Normal. You have UNEQUIPPED any metal items to avoid lightning strikes. Completed the "Stranded on Eventide" shrine quest and fast travelled to the "Korgu Chideh Shrine".
pg. 94/104 STEP 5: Once you have entered the code correctly, make sure Link is still aiming the Magnesis Ability at the middle of the chest. PRESS to toggle ON the Arrow Generator. The Mode Selector LED will now flash in sync with the 4 Green Player LEDS. The generator will run for as long as possible, earning Arrows up to the maximum limit of your inventory, or until you toggle it OFF by PRESSING . RUPEE GENERATOR This MOD will generate Rupees for as long as possible.
pg. 95/104 MARIO™ MODE OVERVIEW The SWITCH UP™ MARIO™ MODE includes MODS that streamline the controls and generators that cut down on the grinding in Super Mario™ Odyssey. Generators grind for coins and moons so that you can unlock costumes and content. Auto Boss Battle magically beats bosses for you. MARIO™ MODE ACTIVATION PAIR YOUR CONTROLLER FIRST, then PRESS & RELEASE the MODE SELECTOR to cycle through the MODES: Mario™ Mode (Red LEDS Super Mario™ Odyssey.
pg. 96/104 MENU MODE You will be using the Menu Mode to change some MOD settings. HOLD (XB: VIEW / PS: SHARE) until the Mode Selector LED turns WHITE. You have entered Menu Mode. While in Menu Mode: TAP (XB: LB / PS: L1) OR (XB: RB / PS: R1) to swap your Easy Dive MOD button (SWAPPED: Heavy Rumble / DEFAULT: Light Rumble). TAP (XB: LT / PS: L2) OR (XB: RT / PS: R2) to swap your Ground Pound+ MOD button (SWAPPED: Heavy Rumble / DEFAULT: Light Rumble).
pg. 97/104 MASTER CONTROLS MASTER QUICK CONTROL suspends ALL MODS. This is helpful if a MOD is interfering with the in-game menu navigation or another gameplay function. WHILE HOLDING , TAP (XB: MENU / PS: OPTIONS) to SUSPEND / RESUME ALL MODS. (Suspended: Heavy Rumble / Resumed: Light Rumble). MASTER RESET ALL SETTINGS to DEFAULT. HOLD (XB: VIEW / PS: SHARE) until the Mode Selector LED turns WHITE. You have entered Menu Mode.
pg. 98/104 MARIO MODS EASY DIVE: This MOD will make Mario dive while mid-air at will, without the hassle of tricky button combinations. The DEFAULT button to perform this MOD is it can be swapped to (XB: LB / PS: L1), but (XB: RB / PS: R1) in Menu Mode. EASY HATTY: This MOD will make Mario cover great distances to areas with up to 2 throws of Mario’s hat. Mario will automatically jump onto the hat after throwing it each time.
pg. 99/104 FROG COIN GENERATOR This MOD will generate Coins for as long as possible. It is available in the first kingdom, "Cap Kingdom", after the requirements are met to remove the rubble from the blocked off door. STEP 1: Ensure that the following requirements are met: Defeat the first boss ("Topper"). Travel through the "Cascade Kingdom" area. As soon as you arrive in the "Sand Kingdom", travel back to the "Cap Kingdom".
pg. 100/104 BOWSER COIN GENERATOR This MOD will generate Coins for as long as possible. It is available in "Bowser's Kingdom", after the requirements are met. STEP 1: Ensure that the following requirements are met: Unlock the "Beneath the Keep" checkpoint in "Bowser's Kingdom". Defeat the "RoboBrood" boss. Collect the "Dashing Above the Clouds" moon, as shown in this video https://youtu.
pg. 101/104 BOWSER COIN/MOON GENERATOR This MOD will generate Coins and Moons for as long as possible. It is available in "Bowser's Kingdom", after the requirements are met. STEP 1: Ensure that the following requirements are met: Unlock the "Beneath the Keep" checkpoint in "Bowser's Kingdom". Defeat the "RoboBrood" boss. Collect the "Dashing Above the Clouds" moon, as shown in this video https://youtu.
pg. 102/104 AUTO BOSS BATTLE This MOD will end the frustration of getting stuck on bosses. Simply follow the instructions and the Auto Boss Battle MOD will magically beat the boss for you! Watch this video https://youtu.be/pZoBF9CiglM and follow the steps below: STEP 1: Ensure that the following requirements are met: Set the in-game "Camera Sensivity" setting to "Low". Set the in-game "Vertical" and "Horizontal" settings to "Normal".
pg. 103/104 WARNING: Due to multiple boss battle patterns, you may have to re-run the Auto Boss Battle MOD multiple times to beat a boss. Also note that PURPLE TEXT bosses REQUIRE 6 HEARTS to beat. BOSS CODE LOCATION STARTING POINT 1: Topper Cap https:// Kingdom www.switch, , , up.ca/auto-bossbattle? lightbox=dataIte m-jo7tgwer 2: Madame Cascade https:// Broode Kingdom www.switch, , , up.ca/auto-bossbattle? lightbox=dataIte m-jo7tgwer1 3: Harriet Sand https:// Kingdom www.switch, , , up.
pg.
