USER MANUAL MODEL: Q‐45BLEYD 1
CONTENTS SAFETY ................................................................4 1 GETTING STARTED ............................................5 1.1 GETTING TO KNOW YOUR TOUCH PHONE ........5 1.2 INSTALLING THE SIM CARD, BATTERY, AND STORAGE CARD .................................................... 5 1.3 CHARGING THE BATTERY ...............................7 1.4 STATUS ICONS ................................................ 7 2 USING PHONE FEATURES ..................................9 2.
6 EXCHANGING MESSAGES ................................ 16 7 INTERNET ....................................................... 18 7.1 WAYS OF CONNECTING TO THE INTERNET ....18 7.2 BROWSER .....................................................19 8 EXPERIENCING MULTIMEDIA........................... 20 8.1 CAMERA & PICTURE ....................................20 8.2 MUSIC ..........................................................21 8.3 FM RADIO ...................................................21 8.
Safety Never attempt to disassemble your phone. You alone are responsible for how you use your phone and any consequences of its use. As a general rule, always switch off your phone wherever the use of a phone is prohibited. Use of your phone is subject to safety measures designed to protect users and their environment. Do not use your phone in damp areas (bathroom, swimming pool…). Protect it from liquids and other moisture.
manufacturers of such equipment will be able to give you any advice you may need in this area. Hospitals: Always make sure that your phone is switched off in hospitals when so instructed by warning signs or by medical staff. Road safety: Do not use your phone when driving. In order to give your full attention to driving, stop and park safely before making a call. You must comply with any current legislation.
The SIM card contains your phone number, service details, and phonebook/ message memory. Your device is supported both 2G and 3G (WCDMA) SIM cards. 1. Remove the battery if it is installed. 2. Locate the SIM card slot, and then insert the SIM card with its gold contacts facing down and its cut-off corner facing out the card slot. 3. Slide the SIM card completely into the slot. Note: • The phone can be supported the double SIM cards.
3. Replace the back cover. To remove the battery 1. Make sure your device is turned off. 2. Remove the back cover. 3. The bottom of the phone has a notch. Lift the battery by the notch to remove it. To install a memory card To have additional storage for your images, videos, music, and files, you can purchase a memory card and install it into your device. 1. Make sure that your device is turned off, and then remove the back cover. 2. Locate the memory card slot on the upper part of the exposed right panel.
Along the top of your phone screen is the status bar. On the left side, icons will appear, notifying you of a new message, upcoming calendar event, or something else you should notice. On the right side of the status bar, you’ll see connection status icons.
2 Using phone features 2.1 Turning the phone function on and off To enable or disable Airplane Mode In many countries, you are required by law to turn off the phone while on board an aircraft. Another way to turn off the phone function is to switch your device to Airplane Mode. When you enable Airplane Mode, all wireless radios on your device are turned off, including the phone function, Bluetooth, and WLAN. -> Settings -> More… -> Airplane mode. 1. Touch 2. Touch ‘Airplane mode’ to enable or disable.
button to make a video call. Notice: • SIM slot 1 can be supported video call default (SIM1 card must be supported 3G network). • Your phone must be in of the normal WCDMA network coverage, and the other side (the receiver’s phone and SIM card) can also be supported the video call function of 3G. 2.3 Answering and Ending a call When you receive a phone call, the incoming voice call screen will appear, allowing you to either answer or ignore the call. 1.
Note that when you open ‘Call settings’ for SIM1 or SIM2, your current settings are fetched, which can take a few moments. 3 Setting on your device Control phone-wide settings from the Home settings screen: touch and select Settings. 3.1 Wireless & networks SIM management You can select to activate or deactivate the SIM card you want to open. Set the default SIM to use voice call, Video call, messaging and data connection.
Select one user profile and enter the following options: Vibrate: Select to have your phone vibrate for incoming calls. Volumes: Select to open the volume control, and then slide your finger along the volume bar to set an incoming call ring volume or alarm, playing back music, videos. Voice/video ring tone: Select to decide on a ring tone to use for incoming calls. Note that you can override this setting for individual contacts in the Edit contact details screens.
Location access My Location: Select a source for determining your location: Wireless networks, or GPS satellites. Typically GPS will be more accurate (to street level) but it consumes more battery power. Security Screen unlock pattern: Create a pattern you will be asked to draw before your screen will unlock. You can select to make the pattern visible or invisible as you draw it. SIM card lock settings: Lock your SIM card for extra security. You can also change your SIM card PIN from this screen.
4 ActiveSync 4.1 Data synchronization Sync by application To control synchronization Contacts, you can do the following: and select Settings. 1. On the Home screen, then touch 2. Select Accounts & sync. When any of the applications are synchronizing, you . You will also see the last time your data was will see the “sync” icon synchronized. 3. By default, the personal information in Contacts will sync whenever you make a change or receive a new message.
To make your phone discoverable: 1. Make sure you have turned Bluetooth on. 2. Touch the Bluetooth name to make your phone visible to other Bluetooth devices for 120 seconds. Name your Bluetooth device 1. Make sure you have turned Bluetooth on. 2. Select Settings > Bluetooth > Bluetooth settings > Device name. 3. Type the name for your device in the dialog box, and then select ‘OK’. 4. Your new device name appears on the Bluetooth settings screen.
You can touch the + icon on the bottom of the screen to add new contact, And add all the information you want to store for this contact in the appropriate fields. Assign favorites Use Favorites as a way to display only those contacts you contact most frequently. Edit contact details You can always make changes to the information you’ve stored for a contact. Communicate with a contact From Contacts you can quickly call or text a contact’s default number, as displayed below their name on the screen.
the message will convert to a multimedia message. 4. To add an attachment, touch ‘Attach’ icon on the right-top of the screen. Adding an attachment will always convert the message to a multimedia message. Select from audio or picture files. You can select to take a new picture if you want, or record an audio file. Any recordings you make will be stored automatically in the Music application in a play list named “My recordings”. To remove an attachment, select the attachment’s ‘Remove’ button. 5.
you! Before you go to your Inbox, you can name the account (if you don’t, your email address will be used). You are also asked to type your name as you want it to display on outgoing messages. You must complete this field before you can select ‘Next’ and go to your Inbox. For less popular accounts, follow the prompts to type the email server, protocol, and other account information yourself. After your account settings have been verified, select ‘Next’ to go to your Inbox. 6.
7.2 Browser and select Browser icon. To open the Browser, touch The Browser always opens to the last Web page you were viewing. The first time you enter the Browser after powering on, your home page will display. You can change your home page by pressing MENU > Settings >General > Set homepage. Zoom and navigation in Web pages While viewing a Web page, you can press MENU and select Settings > >Advanced >Default zoom to set the zoom controls. Slide your fingertip in any direction to shift your page view.
View bookmarked page, Edit bookmark, Delete a bookmark, Bookmark current page etc. Set your home page You set your home page from the Settings screen: 1. Press MENU and select More > Settings. The Settings screen opens. 2. In the Page content section, select ‘Set home page’ to open the dialog box. 3. Type the URL of the page you want to set as home, and then select ‘OK’. Download Web files and applications Before you download any files or applications using the Browser, note the following: 1.
Captured pictures are saved to the “DCIM” folder on your memory card or the phone. Tip: Before you take a picture, wipe the sensor window (on the back cover) to remove any small amounts of oil. and select Camera 1. To open the Camera, on the Home screen, touch icon. 2. The Camera opens in capture mode. Frame your picture within the screen and hold the phone steady. Touch Camera button to capture. Continue to hold the camera steady for a second after you hear the shutter sound. 3.
8.4 Voice Search When data connection or WLAN network is connected, input the keywords on the input field to search the web page that matched keywords. 8.5 Sound record The phone can be as sound record. 9 Other applications 9.1 Calendar Calendar views You can view multiple calendars on your phone, so each calendar event is coded with a color. You can view your calendar in a variety of ways. Touch the date on the left-top of the screen to select from Day, Week, Month or Agenda.
Set an alarm Set the following options: Alarm: Select the check box to turn alarm on (checked) or off (cleared). This is the same check box that appears on the main Alarm Clock screen. Time: The time the alarm will go off is shown. To change this time, select Time to open the time selector. Slide the finger up or down to set the time you want, and then select Set. Repeat: The current repeat selection is shown. To change the setting, select Repeat and make a selection from the menu.
and then press MENU and select Settings. Scroll down and select ‘Date & time’. The Date & time settings screen appears. 2. Use the network-provided values by selecting ‘Automatic’ check box. 3. Select ‘Use 24 hour format’ check box if you wish to use that rather than 12 hour format. 4. Select t ‘Select date format’ option to open the menu of various date formats. 9.3 Calculator and select the To open Calculator, on the Home screen, then touch Calculator icon.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.