Quick Reference Card

Quick Reference Card
Fixed channel operation
To operate on a xed channel:
☐ Go to the channel screen, stop scanning, then select a
channel.
☐ Press PTT to tune the antenna, if required.
Discreet mode switch
Rx/Tx level
indicator
Rx/Tx indicator
channel name
status areas
left
software key
right
software key
volume/speaker mode indicator
menu bar
mode indicator
Tx/Rx frequency
battery level
indicator
missed call icon
mute type indicator
(highlighted when mute is on)
call type
indicator
Tx power
setting
Pull, then rotate right to
zeroise transceiver
Discreet mode on
(No audio or backlight)
Discreet mode o
Keys
Volume down/up
(when is present)
Select channel
Scroll left/up/down/right
Menu/action
Selection
Press Start call
Hold (for 2 sec) Go to Stations list
End call, start/stop scan
Mute on/off
Manual tune screen
Next speaker mode
Next Digital Voice Rate
Free tune receive
Set transmit power level
Select mute type
Toggle between Analogue and
Secure/DV
Go to GPS screen
Toggle Channel/Station screens
Go to Adjust Display Brightness
screen
FUNC 2
Function Select:
Self Tests Screen/Macros Screen
Stations
Call history
Single call
available for
station
Multiple calls
available for
station
Basics
Calling
Call Types
Selective Get Status
Message Channel Test
Send Position Phone
Get Position Alert
ALE Sounding SMS
Voice Message TOD Request
TOD Broadcast
Making a Station Call
To make a call using one of your pre-dened stations:
☐ Go to the channel screen, then hold CALL or press Key 0.
Stations
Call history
Single call
available for
station
Multiple calls
available for
station
☐ Scroll to the station that you want to call.
☐ If there are multiple calls available for the station,
press or CALL, then scroll to the desired call type.
☐ Press CALL.
☐ Respond to any prompts, then press CALL.
© Codan Limited 2019 06-03050-EN Issue 1