Control Amplifier CSi Balanced OPERATION MANUAL T E C H N O L O G I E S I N C b Safety Precautions 1 Introduction 2 Installation & Use 3 Care & Handling 6 Technical Description 7 Technical Data 8 Warranty 10
SAFETY PRECAUTIONS 1 CAUTION WARNING ! CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
INTRODUCTION 2 Thank you for selecting Coda Technologies and our precison line of of high definition, high value audio components. The Control Amplifier CSi Balanced is a precision device, designed in an effort to provide the listener with unmatched sound quality, design, and construction. The CSib will provide you with many years of listening enjoyment.
INSTALLATION & USE 3 REAR PANEL CONNECTIONS AUX2 ~ AUX1 VIDEO BALANCED MAIN POWER 120 C&D B G F A E To provide for adequate ventilation you should allow at least six inches of unobstructed space above and a couple of inches on each side of the amplifier. Because of its large power supply, a local magnetic field may be created and picked up by CD players, turntables and similar equipment. For this reason you should provide at least a foot of space between the CSib and these components. A.
INSTALLATION & USE 4 Front Panel Controls and OPERATION D H C A b F G B E A. LEVEL ADJUST Controls the currently-selected audio level visible on the LED display. B. MODE Selects the audio level to adjust. Cycles between volume, left / right channel attenuation, and subwoofer level. C. LED DISPLAY Displays the currently-selected audio level. Level is indicated in decibels, with 99 being maximum volume and 00 being 100dB of attenuation. D.
INSTALLATION & USE 5 REMOTE OPERATION The CSib can be operated by remote control. The MX350 Learning Remote is included with the amplifier. The relevant pages of the remote interface are described below. For instructions on using the MX-350 itself see the manual included with the remote. CODA The five buttons to the right of the LCD are used to select the functions shown in the display window. Select [CSI] to control the CSib. The same remote is used for both the CSib and CSi.
CARE AND HANDLING 6 The interior of the unit requires no special care. If external cleaning beyond simple dusting is necessary, any dilute commercial ammonia based product will be appropriate. NEVER use any abrasive rags, cleaners or chemical solvents on Coda products. When handling the unit, take care not to mar the aluminum. Aluminum is a medium hardness metal and can be scratched by harder tool steels. Avoid exposing the unit to direct sunlight, and keep it away from sources of intense heat.
DESCRIPTION 7 The remote controlled Coda Control Amplifier CSi Balanced is designed with thoroughness reserved only for the finest preamplifier and amplifier gain stages. Analytical design techniques, both objective and subjective, were applied in an open-minded fashion with musical perfection as the goal. The CSib features a wide range of design topologies and components ported from both broad lineage and the most recent advances in the Coda products and design topologies.
TECHNICAL DATA 8 RATINGS Rated Power 400 watts @ 8Ω 800 watts @ 4Ω Class A to 5W @ 8Ω Frequency Response DC to -3dB @ 100kHz Distortion < .04% from 10 Hz to 20kHz @ 330 Watts Gain 26dB Maximum Current 150 Amperes peak Noise -110dB referenced to rated output Input Impedance 50kΩ unbalanced/1k Output Impedance .
WARRANTY 9 I. Warranty - Any failure of the Control Amplifier CSi Balanced, hereafter known as the product or original product, to operate or to meet specifications, applicable at time of manufacture, due to a manufacturing defect or component failure, will be corrected by Coda Technologies without charge for parts or labor, for a period of ten years from date of original purchase.
WARRANTY 10 Fill in this registration sheet and fax or mail it to Coda Technologies to ensure you are in our warranty system. This will facilitate warranty service should it become necessary. It is recommended that you retain a copy of this form for your own records. Coda Technologies’ address and fax number are located on the back of this manual.
7850 CUCAMONGA AVENUE #34 SACRAMENTO, CA 95826 USA T E C H N O L O G I E S I N C . phone +01 916.383.3653 fax +01 916.455.3653 on the web at CODA.CC email us at info@coda.
