AMPLIFIER 60.0 OPER ATION MANUAL T E C H N O L O G I E S I N C . + BANK CODA TECHNOLOGIES, INC. - BANK 60.
SAFETY PRECAUTIONS CAUTION WARNING ! CAUTION : TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL IS TO ALERT YOU OF THE PRESENCE OF UNINSULATED DANGEROUS VOLTAGE WITHIN THE UNIT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK. ! THIS SYMBOL IS INTENDED TO ALERT YOU OF THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE UNIT.
INTRODUCTION 1 Thank you for purchasing the AMPLIFIER 60.0. This amplifier is a precision device designed in an effort to provide the listener with unmatched soudn quality through superb design and construction. Although it’s operation is fairly simple, in order to operate your amplifier properly and realize all the capabilities of the 60.0 we recommend you read this entire manual carefully.
INITIAL SETUP 2 WARNING: Please ensure that the power switch is turned OFF while you are connecting the r. Connecting or disconnecting cables while the is powered on could cause damage to your speakers. The connectors are clearly marked on the back panel of the ampli er. 1. Audio input can be by balanced or unbalanced interconnects. Connect only one type of input at a time, connecting balanced and unbalanced connectors can cause damage or distortion. between the positive and negative posts or post pairs.
INITIAL SETUP 3 II. Front Panel Control Functions and Indicators input. enabled and working. + BANK CODA T E CH NOL OGI ES , I NC. 2 - BANK 60.
DESIGN PHILOSOPHY 4 I. Design Philosophy and Approach The subtlety of the design process at this level of performance makes it impossible to easily explain all of the advantages inherent in the 60.0. However, we present here an overview to give you an understanding of some of its unique features and an idea of the listening experience you can expect. a particular technique has numerous unrelated advantages and possibilities.
DESIGN PHILOSOPHY 5 I. Design Philosophy and Approach (continued) To maintain “Precision Bias” requires an advanced bias circuit that must have a very high degree of stability under a wide range of temperatures and load conditions. networks are of such high impedance and poor thermal regulation that at the extremes of operation, bias currents are controlled. Advanced tracking techniques used in the 60.0 result in absolute control of bias currents under all conditions.
DESIGN PHILOSOPHY 6 II. Material Quality The amplifier’s chassis is made from machined aluminum. All exterior metal parts are anodized or powder coated for durability. Printed circuit boards are fiberglass epoxy with gold plating over a tin/nickel barrier. The gold layer will not corrode, while the barrier layer prevents the gold from migrating to the lower copper layer. All resistors are precision metal film; 1% tolerance for 1/4-watt and 5% tolerance for 1-watt.
TECHNICAL DATA 7 BRIDGED MONO Rated Power: Frequency Response: Distortion: Gain: Maximum Current: Noise: Input Impedance: Output Impedance: 1000 Watts class AB @ 4 Ohms 500 Watts class AB @ 8 Ohms DC to -3dB @ 100kHz < .02 percent from 10 Hz to 20kHz @ rated power 32dB >100 Amperes peak -120dB referenced to rated output N/A unbalanced/10k Ohms balanced .
CARE AND HANDLING 8 The interior of the amplifier requires no special care. If exterior cleaning beyond simple dusting is required, any dilute ammonia-based product is recommended. Do not use any abrasive rags, cleaners or chemical solvents on the amplifier. When handling the amplifier, take care not to mar the faceplate. Aluminum is a medium hardness metal and can be scratched by harder tool steels, and the grained surface can be easily marred if the amplifier is set face-down on a hard surface.
WARRANTY & DISCLAIMER 9 i. W pr re, due to a manufacturing defect or component failure, will be corrected by Coda Technologies without charge for parts or labor, for a period of ten years from date of original purchase. Coda Technologies will provide for surface transportation to and from the factory for a period of one year from date of original purchase. ii.
WARRANTY REGISTRATION 10 Fill in this registration sheet and fax or mail it to Coda Technologies to ensure you are in our warranty system. This will facilitate warranty service should it become necessary. It is recommended that you retain a copy of this form for your own records. Coda Technologies’ address and fax number are located on the back of this manual.
7850 CUCAMONGA AVENUE #31 SACRAMENTO, CA 95826 USA T E C H N O L O G I E S I N C . phone +01 916.383.3653 fax +01 916.455.3653 on the web at CODA.CC email us at info@coda.