USER’S MANUAL version 1.
UCR-4285 UNIVERSAL REMOTE CONTROL 1 Description of buttons 2 Power: On/Off/Stand-by Indicator Device selection Menu Guide Two-digit number entry AV channel selection Enter/OK Navigation/direction buttons Volume higher/lower Mute Return to previous selection Channel higher/lower Teletext shortcut keys Control options for video and audio recordings and teletext functions 16. Number entry 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
UCR-4285 UNIVERSAL REMOTE CONTROL [1] Press the latch and remove the battery cover. [2] Install 4 batteries. The poles must match the + and - symbols on the inside of the battery compartment. Close the cover.
UCR-4285 UNIVERSAL REMOTE CONTROL CONFIGURATION USING THE CODE LIST [3] Switch on your device manually (or with the original remote control). [4] Find the 5-digit code in the code list that matches the brand of your device. The TV in the picture is only used as an example.
UCR-4285 UNIVERSAL REMOTE CONTROL 3 seconds [5] Press the device button that you want to configure (set your television under ‘TV’, your stereo system under ‘audio’ etc.). [6] Press and simultaneously. Do not release them until the indicator has flashed several times to confirm. The buttons are not device specific. Thus you nd can configure a 2 TV under a button you do not use (e.g.
UCR-4285 UNIVERSAL REMOTE CONTROL [7] Set the code you found in [4]. [8] Point the UCR-4285 at your device. Press the power button (device should switch off or go to stand-by). Now check all the other functions.
UCR-4285 UNIVERSAL REMOTE CONTROL CONFIGURATION USING THE SEARCH FUNCTION [9] Switch on your device manually (or with the original remote control). [10] Press the device button you want to configure (set your television under the ‘TV’ button). The TV in the picture is only used as an example. Follow these instructions for other AV equipment as well! The buttons are not device specific. Thus you can configure a 2nd TV under a button you do not use (e.g.
UCR-4285 UNIVERSAL REMOTE CONTROL 3 seconds [11] Press and simultaneously. Do not release them until the indicator has flashed several times to confirm. [12] Enter code ‘9 9 1’. The indicator flashes several times to confirm.
UCR-4285 UNIVERSAL REMOTE CONTROL [13] (1) Press the applicable button: TV (CRT/CD/Plasma): Press ‘1’. Video (DVD/VCR): Press ‘2’. Audio (CD/Tuner/Ampl.): Press ‘3’. Satellite/Cable/Media PC: Press ‘0’. Press ‘Power’. [14] (1) Point the UCR-4285 at the device and press the direction button c. Repeat this until the device switches off (or goes to stand-by). (2) Immediately press ‘Enter’.
UCR-4285 UNIVERSAL REMOTE CONTROL CONNECTING TO A COCO RECEIVER [15] Activate the search mode of the receiver. [16] (1) Press the device selection button with the light bulb. (2) Select the button you wish to assign to the receiver (button 1 through 0 or red, green, yellow or blue). (3) Press ‘CH+’. To confirm, the built-in dimmer switches on and off two times.
UCR-4285 UNIVERSAL REMOTE CONTROL SWITCHING LIGHTS ON/OFF [17] (1) Press the device selection button with the light bulb. (2) Select the number you assigned to the receiver in [16] (point 2). [18] Control your lighting: On Press ‘CH+’. Off: Press ‘CH-’. Dimming: Press On: ‘CH+’ 3x: (1) light switches on, (2) light intensity changes continuously, (3) select desired light intensity.
UCR-4285 UNIVERSAL REMOTE CONTROL Extra functions Teletext If your TV is suitable for teletext, you can use several buttons to control the basic functions: On: Activate Teletext. Off: Switch off Teletext. Zoom in: Show the upper half of the page. Press again to see the lower half. Press again to return to normal format, or (depending on the TV) press the button. Pause/Stop: Hold the page. Mix: Shows both Teletext and the normal TV picture. Also use this button for subtitles.
UCR-4285 UNIVERSAL REMOTE CONTROL • Programming a macro (example: Using the ‘Last’ button to switch from ‘TV’ mode to ‘SAT’ mode and select channel 801): 1- Press ‘TV’ to select the mode in which you want to execute the macro. 2- Press and simultaneously. Do not release them until the indicator has flashed several times to confirm. 3- Press ‘9 9 5’. The indicator flashes several times. 4- Press ‘Last’ to select the button you want to assign to the macro.
UCR-4285 UNIVERSAL REMOTE CONTROL Transmitter: Controls your COCO receivers. Program your receivers under the same button to control them simultaneously, or program them under various buttons to control them individually. • For the ‘transmitter’ function this product must be used in combination with at least one COCO receiver. The wireless system can be indefinitely expanded with other COCO remote controls and/or receivers. • The standard setting for the ‘lighting mode’ is COCO house code ‘A’.
UCR-4285 UNIVERSAL REMOTE CONTROL • If your AV device does not have a power button, press the ‘Play’ button in step [13]. • Some TVs cannot be switched on with the ‘Power’ button. In that case, use a channel number button or consult your TV manual for the correct manner to switch it on. • If the product does not work or does not work properly: - Check the correct placement and/or function of the batteries of the transmitter (replace if necessary).
UCR-4285 UNIVERSAL REMOTE CONTROL • • • • • Power Replace the batteries if the remote control does not function reliably. Only use 1.5 Volt AA (LR03) alkaline batteries. All the settings will remain intact after changing the batteries. Do not throw the batteries into an open fire. Respect the local regulations when disposing of batteries. Wireless • This product works with infrared signals (control of multimedia devices) and with radio signals (control of COCO receivers).
UCR-4285 UNIVERSAL REMOTE CONTROL Warranty and copyright This device is covered by a 2-year warranty that begins on the day of purchase. Visit www.cocotechnology.com/warranty for additional information. Reprinting of (portions of) this manual without permission from Pan-Trade International B.V. is expressly prohibited.
UCR-4285 UNIVERSAL REMOTE CONTROL PAN-TRADE INTERNATIONAL B.V. P.O. BOX 126 4760 AC ZEVENBERGEN THE NETHERLANDS www.coco-technology.
