® True Wireless Rugged Speaker Instruction Manual CSTW-43FD
Table of Contents Read Me ......................................................................................... 3 English ........................................................................................... 4 Introduction ......................................................................................... 4 Package Contents ................................................................................. 4 Product Overview......................................................................
Read Me Model #: CSTW-43FD (FD #2101677) 12. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such 13. as radiators, heat registers, stoves, or other 1. 2. 3. 4. 5. 6. 7. apparatus (including amplifiers) that produce heat.
English Introduction Thank you for purchasing the CSTW-43FD. This instruction manual is intended to help you better understand and use your Bluetooth® Speaker. Terms covered in this manual will become more familiar to you as you use your speaker. Before using this device for the first time, please fully charge the battery by plugging the provided USB-C cable into the port of your speaker and plugging the other end into a local power source.
Product Overview Front View Back Panel 1 4 2 5 3 1. Power / Play Pause 2. LED Indicator 3. Previous Track / Decrease Volume 4. Next Track / Increase Volume 5. 6. 7. 8. 9. 10. Mode Charging Port Charging Indicator 3.5mm AUX Port USB Input Memory Card Input General Usage Powering On or Off To power on your speaker simply press and hold the Power/Play Pause Button until you hear an audio prompt and see the LED Indicator begin to flash blue.
Wireless Pairing, meaning you may transmit music from your device to two CSTW-43FD speakers at the same time with no wires connecting the two speakers. To pair or unpair speakers with each other press and hold the Mode button on either speaker. When your speakers connect to each other you will see the LED Indicator on the primary speaker rapidly flashing blue, and a solid blue on the secondary speaker’s LED Indicator.
alert you that the device has connected successfully. Note: On some devices you may need to scan or search for devices, please reference your devices user manual on connecting Bluetooth® devices if you are unsuccessful Music Controls After you connect your device to the CSTW43FD music will be playable through your app of choice. To pause or resume your music in Bluetooth® mode, USB Input mode, and Memory Card Input mode press the Power/Play Pause button.
Volume. Note: if reception is not good you can plug in a 3.5mm AUX cable to increase signal. Phone Calls To answer or hang up an ongoing phone call with your speaker press the Power/Play Pause button. To reject an incoming call, hold the Power/Play Pause button. AUX, Memory Card & USB Mode To connect on non-Bluetooth® enabled devices you can use an AUX cable, USB Drive, or Memory Card to play music directly on your speaker. See Music Controls to make music and volume adjustments as necessary.
Driver Unit Size 2.25 Inches Impedance 4Ω USB & Memory Card Storage Up to 32 GB FM Radio 87.5 MHz - 108.0 MHz Battery Capacity 1800 mAh Battery Type Rechargeable Lithium-ion Charge Voltage 5V Output Power 5W x 2 Inglés Introducción Gracias por comprar el CSTW-43FD. El objetivo de este manual de instrucciones es ayudarlo a comprender y utilizar mejor su altavoz Bluetooth®. Los términos cubiertos en este manual le resultarán más familiares a medida que use su altavoz.
• 1 x cable de carga • 1 x manual de usuario Descripción del producto Vista frontal Panel posterior 6 7 8 9 1 4 2 3 5 1. Poder / reproducir pausar 2. Indicador LED 3. Pista anterior / Disminuir volumen 4. Siguiente pista / aumentar volumen 5. Modo 6. Puerto de carga 7. Indicador de carga 8. Puerto AUX de 3.5 mm 9. Entrada USB 10.
pausa de encendido / reproducción hasta que escuche un mensaje de audio y vea que el Nota: El altavoz que está conectado al dispositivo con Bluetooth® se convertirá en el altavoz principal. Si el usuario apaga el altavoz principal, ambos altavoces se apagarán. El emparejamiento inalámbrico verdadero solo funciona en modo Bluetooth®. indicador LED comienza a parpadear en azul.
Conexión a través de Bluetooth® Abra la configuración de Bluetooth® en un dispositivo con Bluetooth® (teléfono, tableta, computadora portátil, etc.) y active la funcionalidad Bluetooth® del dispositivo. El indicador LED comenzará a parpadear rápidamente en azul para indicar que su altavoz está en modo de emparejamiento. Seleccione CSTW-43FD cuando aparezca en la lista de dispositivos disponibles.
volumen o Pista anterior / Bajar volumen. Radio Para comenzar a buscar estaciones de radio FM, presione el botón Reproducir / Pausa. Cuando llegue a la estación que desea escuchar, presione nuevamente el botón de encendido / pausa de reproducción para detener el ciclo. Para cambiar manualmente las estaciones de radio FM, presione Siguiente pista / Aumentar volumen y Pista anterior / Disminuir Volumen. Nota: Si la recepción no es buena, puede enchufar un cable AUX de 3,5 mm para aumentar la señal.
unidad USB o tarjeta de memoria para reproducir música directamente en su altavoz. Consulte Controles de música para hacer ajustes de música y volumen como necesario. Nota: Cuando se conecta un cable AUX, o se inserta una tarjeta de memoria / unidad flash, su altavoz se desvinculará automáticamente de cualquier dispositivo Bluetooth® activamente emparejado. Especificaciones Versión Bluetooth® 5.0 Alcance Bluetooth® 33 pies Nombre de emparejamiento de Bluetooth® CSTW-43FD Tiempo de juego Hasta 9.
Warning: Some Products may contain components that are small enough to be swallowed. Please keep out of reach of children. Subject to the terms and conditions herein, SUMMIT ELECTRONICS LLC (hereinafter called “SUMMIT ELECTRONICS LLC”) warrants to the original purchaser of the Product (“Customer”) that for the applicable Warranty Period listed below, the Product will be free from defects in material or workmanship under normal, non-commercial use (“Defects”).
Customer specifics rights, and Customer may also have other rights that vary from jurisdiction to jurisdiction. To obtain Warranty service, Customer must email SUMMIT ELECTRONICS LLC Technical Support prior to making a Product return.
