CORDLESS TELEPHONE 5.8GHz FILTERED SOUND WITH 50 CHANNEL AUTO SCAN Model CT-P7250 OWNER'S MANUAL INSTALLATION AND OPERATING INSTRUCTIONS PLEASE READ THIS MANUAL CAREFULLY BEFORE USE. KEEP FOR YOUR REFERENCE. Special Features Congratulations on yous selection of a quality CONY Product. With proper care and by following the setup and user instructions in tis manual, this unit will provide you with years of trouble free service. CONY is commuted {a providing quality products that fit your needs.
Special Features Spacial Services Use the FLASH button to access special services such 25 Cal Wing ‘supplied by your telephone company or company switchboard, STANDBY Mode When in STANDBY mode (ON-HOOK), the for is capable of receiving 3 call. When the HANDSET is on the BA: UNIT, iris automatically in the STANDBY mode (ON-HOOK), When fhe HANDSET is taken off the BASE UNIT, it remains in the STANDBY mode sturdily you activate the PHONE button.
Battery Cautionary Instructions CAUTION: Danger of explosion if battery is incorrectly replaced. To reduce the risk of ire or personal injury, read and follow these instructions: 1. Usa orgy the following type and size of battery pack: Coldness Telephone Battery Pack 3 8V Bergman GREAT POWER Ni-Cd Battery 3PH-AABD0-5-X24 2. Do not dispose of the battery pack in a fire, It may explode. Check with focal codes for possible special disposal instructions. 3. Do not open or mutilate the battery pack.
BASE UNIT Controls 1. Alphonse Line Connection Jack 2. Toneless Select Switch 3. Prows-in Connection Jack 4. Antenna: Raise of reposition for best reception. 5. POWER LED: Lights when the bass uit power on. 6. CHARGE/N USE LED: Lights when the handset is on the cradle is being charged and when the handset is in use. 7. PAGE Button: Press 10 page the HANDSET. 8. Charge Terminals: For charging the HANDSET battery pack. For fest performance, clean periodically with 2 damp cloth only.
Getting Started that you do not have tone dialing service. Press the PHONE button or the HANDSET to hang up. Set the TONE/PULSE select switch o the PULSE mode and then try again. 4. Before finial use, charge the HANDSET for 12 hours, You are now ready 1a use your new CONY Cordless Telephone -8 Desk Mounting NORMAL POSITION (MOUNTING BRACKET not required): Far nol position, as shown in Figure 1, pace the BASE UNIT on any desired but suitable location.
Wall Mounting You may those to put the BASE UNIT of your cordless telephone atonal. 1. With the back of the BASE UNIT facing up, connect the TELEPHONE LINE CORD to the telephone line jack. insert the top hooks of the MOUNTING BRACKET into the matching slots of the BASE UNIT (as shown below). Then push the bottom hooks of the MOUNTING BRACKET into place.
[ZERO Placing Cali. 1.Press the TALK button. The IN USE LED indicator 2 Listen for a dial loan, 3 Dial the phone number, 4 When you have finished with your call, press the TALK button again. The IN USE LED indicator will fur off. Redial Feature 1.1f you get a busy tone, press the TALK bunion to hang up. 2.Later, press the TALK bunion again, 3. Listan for a dial phone, 4,Press the REDIAL button. This will automatize telephone number you called.
Security System Your cordless telephone uses a digital coding security system lo ‘prevent unauthorized use of your elephantine line by ancienter nearby cordless telephone. The system has its own Identifying signal created ‘by microcomputers in both the BASE UNIT and HANDSET. Security Gide This telephone has an internal security aced with 65,536 possible combinations.
Changing the Battery Pack Changing the Battery Pack The battery pack provides parer for the HANDSET of your cordless telephone. To replace the Buttery pack 1. Remove the HANDSET battery compartment cover by siding it down, 2. Pull out the battery connector and removes the battery pack. 3. Plug the new battery pack into the battery connected. 4. Slide the HANDSET battery compartment cover firmly into place in its closed position. 5. Before use, charge the new battery pack for 12 hours.
BCT HT EIT Technical Information This cordless telephone uses radio frequencies to allow mobility. There are certain difficulties in using radio frequencies with a cordless telephone. While these are normal, the following could affect the ‘operation of your system House Electrical pulse noise is present in most homes at one dime or another. This noise is most sense during electrical storm.
FCC Requirements Federal Communications Commission Requirements (continued) This equipment shooed not be used on coin telephone fines. Connection to party line service is subbed to state dfs, If ruble is ‘experienced, disconnect this equipment from the telephone line to determine ¥ it is causing the malfunction. It the equipment is determined to be malfunctioning. #s use should be disconnected until the problem has been corrected.
Coy s Ability under any legal teary for any loss or damage in any way related to this product shall in no event exceed the sales price of this product. In no event shall CONY be liable for any incidental or consequential damages resulting from the use of, or inability to use this product. Repair or replacement as provided under this warranty is the exclusive remedy of the consumer.