WASPcam 9905 Sports camera User Manual Please read through this user manual before using the product and keep the manual for future use. Please operate the camera on basis of full understanding of the manual. Any alteration of product appearance and specification below are without further notice.
Precaution Pls be well noted with the following guidelines before you use this camera, * Pls refer to manual instruction and operate the camera correctly. Illegal operation may cause damage to camera internal components. * Do not fall or hit the camera, it may damage the internal components. * For your safety, please keep the camera from the children and animals, in order to avoid accident * Do not place the camera in a damp or dusty location for extended periods of time.
Operation Interface Introduction 1) Interface Introduction 1, Lens 2, Led night 3, Power key 4, REC key 5, LCD screen 6, Mode key 7, Menu key 8, OK key 9, LED on/off key 10, Left key 11, Right key 12, Working indicator 13, Charge indicator 14, USB port 15, HDMI port 16, Back cover 17, Locker 18, SD slot Button function Introduction Power key（ ）：To turn on/off the camera; to clear screen character, to delete files under playback mode Mode key ( ): to switch to capture mode, video mode and the playback mode
Power on/off camera 1, Turn on Press “ ” key for 3 secs, with one beeping sound, the working indicator light up, and “welcom” show on screen. Camera starts up and enter standby(default is record mode) . On the top of LCD screen it displays the record icon,anti-shaking icon, remaining recording time of card icon; at the bottom of LCD screen it displays the battery icon, date and time icon.
Insert and take out storage card 1, Insert the card: open the lock of back cover, press the card slot at right direction, put the card according to the right direction, then lock the card slot. 2, Take out the storage card . 1) Turn off the camera 2) open the lock of back cover, press the card slot at right direction, then take out the card. Notice Please confirm the inserting direction of the TF card. Reversed inserting may cause damage to the camera and the card. l FWVer：2.
l Format： SD card Default: Cancel / ok l Version：FWVer：2.0/20141031 Under power on, press twice “menu” key to enter system setting, press / key to choose remote: and select Remote match, LCD show” wat remote match” , and camera enter pairing status already, At this time, press both buttons on remote controller to start pairing, Pairing success: LCD show :”Remote match OK” and auto disappear. Remote control Description Key description: 1. dual-color indicator 2. Inquiry key 3.
Status/LED Status inquiry Red LED indicator Blue LED indicator Standby 1 time/sec frequence Flickers about 5sec off Recording off Light on 3 secs then off power off Light on 3 secs then off off matching Long light Long light success Light on 3 secs then off Light on 3 secs then off Matching operation failure off off start recording Flickers 5 secs at frequency of 1 time/sec Flickers 5 secs at frequency of 1 time/sec stop recording Flickers 5 secs at 2time/sec frequency Flickers 5
Capture mode: signal/3s Timer/ 10s Timer/30s Timer Auto photo：off/3seconds/5seconds/10seconds resolution: 12M/10M/5M Sequence: off/ on Quality: Fine/Normal/Economy Sharpness: Strong/ Normal/Soft White Balance: Auto/Daylight/Cloudy/Tungsten/Fluorescent/Underwater Color: color/B&W/ Sepia ISO: Auto//100/200/400 Exposure: +0.0,-1/2,-1.0,-3/2,-2.
4. Quick Review：Off/2seconds/5seconds press “menu” key to enter camera setting , press / key to choose Quick Review and select the time, press OK key to confirm, press REC key will photo 1pcs and auto preview 2sec(according to the time you set), then back to photo standby mode; Video setting Under Video mode, press twice “menu” key to enter Video setting , press / key to choose option, press OK key to confirm, press “menu” key to quit.
refer to Video setting), “Motion Detecting”and icon showed on the screen, press once key to enter motion detection. If Object is moving, camera will auto record 30sec(according to the time you set) and stop, If no object is moving, it will stop recording automatically., If there is always object moving, it will detect the object circularly according to the time you set. If you need pause recording, press once key to stop.“Motion Detecting”showed on the screen, If you need cancel motion detection.
Press / to choose “Delete all” or “Delete Current”, press” OK ” key to confirm, Press / to “Cancel” or “ok” deleting the file. Press "ok" to confirm delete mode will exit. 2.Protect Files Under standby mode, press twice“ MODE ” button to enter into playback mode, Press / to choose file, Press "MENU" button to enter and Press “setting.
Technical specification Sensor: 3M CMOS Video Resolution: 1080P30FPS/1080P25FPS/720P60FPS/720P50FPS /720P30FPS/720P25FPS/VGA120FPS Image size: 12M/8M/5M Storage: TF card, support up to 32G Lens : 160° Video format: AVI Image format: JPG WIFI: 802.11b/g/n Remote: 2.4G remote control Audio: Built in MIC, speaker Port: USB、HDMI、TV OUT Power: Li-ion rechargeable battery 1050mAh Screen: 1.5 inch TFT FCC Statement This device complies with part 15 of the FCC Rules.
IC Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interfe The term “IC: “ before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications.
