ITEM: 800510 ASSEMBLY INSTRUCTION ASSEMBLY INSTRUCTION ASSEMBLY TIPS: 1.Remove hardware from box and sort by size. 2 Please check to see that all hardware and parts are present prior to start of assembly. 3. Pleasa follow attached instructions in the same sequence as numbered to assure fast & easy assembly. A Warning! 1.Don't attempt to repair or modify parts that are broken or defective. Please contact the store immediately. 2.This product is for home use only and not intended for commercial establishment.
ITEM: 800510 ASSEMBLY INSTRUCTION z HARDWARE PACKAGE NO DESCRIPTION FIGURE QTY |NO DESCRIPTION FIGURE QTY ANTI-TIP STRAP WALL SCREW 7 | 17oxt5mm = 2PC8 | 9 | yum SO PCS 8 bran ve So PCS | 10 | SCREW #4x16mm oO PCs ‘Apply glue on al wooden dowels to ensure integrity of the structure. COR page 3 of 8 www.coastercompany.
ITEM: 800510 ASSEMBLY INSTRUCTION STEP 2: ‘Apply glue on all wooden dowels. to ensure integrity of the structure. STEP: nt (2x20 ‘Apply glue on all wooden dowels 10 ensure integrity of the structure. COASTER o FINE FURNITURE paged of 8 www.coastercompany.
ITEM: 800510 ASSEMBLY INSTRUCTION STEP 4: STEPS ‘Apply glue on al wooden dowels to ensure integrity of the structure STEP 6 Apply glue on all wooden dowses to ensure integrity of the structure. COR page 50f 8 www.coastercompany.
ASSEMBLY INSTRUCTION ITEM: 800510 STEP 7: STEP 8 : ply glue on all wooden dowels to ensure integrity of the structure. www.coastercompany.
ITEM: 800510 ASSEMBLY INSTRUCTION STEP STEP 12: ATTENTION: ANTI TIPPING SAFEGUARD Please install the anti-tipping hardware as shown in the drawing. (1) WALL This can help to prevent any tipping issues. WALL ha Tae (3) WALL THEE HRS Poinciana GRIN Tares THE tot moth tse Ford hil shapeless TEAS SPAT A. SIR San a SE RAT Eli SRO Nii SR HE Ri sil pid seine C In | COR page 8 of 8 www.coastercompany.