dS COAST SEQUOIA INC Bi-Fold Barn Door Hardware Instruction Manual ( J-Shape Single Door) ( J-Shape Double Door) Single door hardware kit includes Part Name Picture 2.
Prepare and Install the Tracks 1) Draw Line for the Track, Drill Track Holes a. Place the rail against the wall,Using a level, draw a line for the Track, and use a pencil to mark where the holes should be.Make sure the height of holes on the wall (H+65mm) Note: Concrete wall: Drill holes by using a drill bit. Wood framed wall: Drill out the holes by using a drill with 1/4” (mandrill bit. Level can make the rail horizontal ys Hae bin hii St, 4 ESE Btn ant a a = Latent? Nn 4 a install The Track a.
Prepare Your Doors 05 Single Door Hanging and Positioning Doors oh @) a.Fold to the right side , the bottom pivot and bracket Attach Steel Hangers to Your Doors gy x ion the right side . Drill the holes for handle on the left mer side Picture for your reference. a. Install the hangers onto the door according to the For a singe door, both rollers should be installed at measurement in the pictures below.Maximum door the ed f the door.
b.Fold to the right side , the bottom pivot and bracket ion the right side . Drill the holes for handle on the left side Picture for your reference. For a singe door, both rollers should be installed at the edge of the door. NOTE: FOR YOUR SAFETY, PLEASE DO AS THE FOLLOWING. THIS IS TO SECURE THE DOOR FROM FALLING. Before hanging the door on the rack: For the fixed door side, position the “U” shaped screw between the wheel bar and the rack.
Install the metal plate at the bottom of the door panel « Failure to wear proper safety gear protection) may result in serious injury or death. Always wear proper safety gear before using power tools. | « Improper operation of power tools may result in loss of control, serious injury or death. Always ensure you have complete control of the power tool and the work area is free of hazards before operation a power tool.