CNMP-511 User Guide Wireless MiniPCI Module
1. Introduction The CNMP-511 is designed to provide Wireless LAN function on a MiniPCI Type IIIB form factor which is for built-in notebook PCs. The function is based on SiS 160 chipset, which implements the full IEEE802.11b standard data rates up to 11 Mbps. 2. Features - IEEE802.11 Direct Sequency Spread Spectrum (DSSS) - IEEE802.11 Standard Data Rates: 1, 2, 5.5 and 11Mbps. 3. Specification 3.1 Interface - IEEE 802.11b compliant - PCI bus interface specification 2.2 MiniPCI specification 1.0 3.
software for this device directly. D. E. Click “Finish” to complete the installation. After completing the Driver and Utility installation, a new icon will be displayed in the system tray at the bottom of the screen. Click the icon and start using the WLAN MiniPCI Adater. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required.