VER1120087660 DESIGN MINI SYSTEM DMS 7660 USER MANUAL -1-
General Imprint All rights reserved. Any reproduction without consent of cmx® is prohibited. cmx® reserves the right to modifications of the device.
General CONTEXTS 1. GENERAL ...................................................................................... - 1 1.1. Safety Precautions ................................................................ - 1 1.2. Disposal of Waste Electronic Equipment .............................. - 2 1.3. Battery Disposal .................................................................... - 2 1.4. Copyright ............................................................................... - 2 1.5. Hearing Protection ..
General 11.WARRANTY ................................................................................. - 22 11.1. Warranty Procedure .......................................................... - 22 11.2. Warranty has expired ........................................................ - 23 11.3. Shipping the Unit ............................................................... - 23 12.IN THE BOX .................................................................................. - 25 13.TECHNICAL SPECIFICATIONS ...
General 1. General 1.1. Safety Precautions Only connect to mains power supply (230 Volt/50 Hz). Do not place containers filled with water on top of the device. Do not place the device in close proximity of water (e.g. sink, wash basin, etc.). The device can fall into the water and cause a short circuit. The device consumes some power during standby operation. For zero power consumption disconnect from mains power supply.
General 1.2. Disposal of Waste Electronic Equipment Your product is manufactured from high quality raw materials and should be recycled. Ask your municipality for collecting points for waste electronic equipment. Do not dispose of old appliances with the household waste. The symbol on the product, the instructions for use or the packing will advert about the methods for disposal. 1.3. Battery Disposal The law requires returning exhausted batteries to public collection points or the dealer.
General Only turn the volume to a level where you can still hear ambient noise. 1.6. Cleaning and Maintenance Cleaning the Casing Clean the casing with a dry cloth. Before cleaning disconnect from mains power supply. Do not clean with liquid cleaning agents or a wet cloth; this can cause a short circuit. Cleaning CDs Clean CDs with a soft cloth from the center to the edge. Do not use solvents or abrasive cleaning agents. Do not use pointed or sharp utensils for cleaning; this will damage the CD.
Features 2. Features This HiFi system – DMS 7660 can play all Audio CDs and MP3 CDs. Music playback is also possible via USB port and SD card reader. You may also play your MP3 files directly from the MP3 player connected AUX in. Purchase the AUX cable separately.
Location of controls 3. Location of controls 3.1.
Location of controls 10 CD drive motorized CD drive 11 EQ Select EQ preset 12 BAND RADIO: toggle between AM/FM 13 PHONES Earphones/headphones jack 14 OPEN/CLOSE Open and close CD drive 15 AUX Port for MP3 player / USB stick 16 BACK(TU-DN) CD: rewind / previous track Radio: select frequency / station down 17 Infrared sensor For remote control 18 PRE-DN Preset previous station 19 SD JACK SD or MMC card slot 20 NEXT (TU-UP) CD: fast forward / next track Radio: select frequency /
Location of controls 3.2.
Location of controls 3.3.
Location of controls 12 REPEAT Select playback mode 13 FUNCTION Function selector TUNER, CD, AUX, CARDUSB 14 BAND selector – Stereo/Mono 15 P-UP Next station 16 VOL+ Increase volume 17 BACK CD: rewind / previous track Radio: select frequency / station down 18 NEXT CD: fast forward / next track Radio: select frequency / station up 19 P-DOWN Previous station 20 VOL- Decrease volume 21 OPEN/CLOSE Open and close CD drive -9-
Preparation 4. Preparation 4.1. Connections Follow these steps to connect the system: Schritt 1 L L R R Schritt 2 1. Connect the speaker cables to the speaker jacks. 2. Connect to mains power supply. Disconnect the system from mains power supply during extended periods of non-use; it consumes a certain amount of power in standby mode. See chapter 8 for further information. 4.2. Insert battery The battery compartment is at the top of the remote control.
Preparation 1. The CR2025 button cell is already inserted in the remote control before delivery. 2. Remove the plastic strip to activate the battery. To change the button cell insert the battery observing the polarity (+ and -), as marked inside the battery compartment. The lifetime of the battery is approximately 6 months with normal use. To avoid damage remove the battery from the remote control during extended periods of non-use.
CD-Player 5. CD-Player 5.1. Insert CD / MP3 CD 1. Press the OPEN/CLOSE button to vertically open the CD drive. 2. Insert a CD with the label up and carefully press it down onto the ball bearing spindle. 3. Press the OPEN/CLOSE button to close the CD drive. Do not close the CD drive manually; this can cause damage to the mechanism. 5.2. CD / MP3 CD Playback This system can play CDs / MP3 CDs in different playback modes. 1. Press the REPEAT button on the remote control to select the desired mode.
CD-Player Setting playback Random Repeat all tracks on the CD in random order or Shuffle 3. Press the INTRO button on the remote control to select the desired mode. Setting playback Intro Play the first few seconds of the track 5.3. Program CD/ MP3 Tracks You can program your own playlist with up to 20 tracks. 1. During CD / MP3 CD playback press the STOP button before programming. 2. Press the MEMORY button until 00 P—01 is displayed. 3.
Radio 6. Radio 1. Press the FUNCTION button until „TUNER“ is displayed. 2. Press the BAND button to toggle between AM and FM. 6.1. Save radio stations You can save the current station or the frequency to one of the station memories. You can save up to 20 stations to the memory. 1. Press the BACK or NEXT button on the remote control until the desired frequency is displayed. 2. Press the MEMORY button, until a number between „01“ and „20“ flashes on the display. 3.
Sound scenarios 7. Sound scenarios 7.1. Effect Repeatedly press the EQ button to select the desired sound scenario. Select between the following sound scenarios: Pass Pop Rock Jazz Classic In PASS mode the equalizer is deactivated.
External components 8. External components 8.1. Connect earphones / headphones 1. Connect your earphones or headphones. The speakers are muted if earphones are connected. To avoid hearing problems do not use earphones or headphones for an extended period of time. Increased sound pressure from earphones or headphones can cause hearing loss. See chapter 9 for further settings. 8.2. USB 2.0 Extend your system by connecting your MP3 player or USB stick.
External components 8.3. SD and MMC memory card reader Extend your system by inserting a SD or MMC memory card in the card reader. Do not disconnect the device when „CARD-USB“ mode is selected. If an MP3 player or USB stick and a SD card are connected playback starts from MP3 player or USB stick. Disconnect MP3 player or USB stick to start SD card playback. 1. Insert the SD or MMC card in the card reader. 2. Press the FUNCTION button until „CARD-USB“ is displayed. Playback starts automatically.
External components Do not disconnect the device when „AUX“ mode is selected. 1. Connect your MP3 player. 2. Press the FUNCTION button until „AUX“ is displayed. Playback starts automatically. To avoid damage only disconnect the device after pressing the STOP button and selecting a different mode with the FUNCTION button. See chapter 9 for further settings.
Further Operation 9. Further Operation This operation you have for CD playback and for external components (SD / MMC / USB / AUX). Procedure Operation Stop playback Press the STOP button. Pause Press the PLAY/PAUSE button. Press again to resume playback. Skip mode Press NEXT or BACK during playback or pause modes. Skip to next folder Press the FOLDER button. Skip 10 tracks ahead Skip 10 tracks back Track selection with number buttons Press the Track+10 button. Press the Track-10 button.
Troubleshooting 10. Troubleshooting Contact the service hotline or use the contact form on the homepage in case of problems with the system that are not dealt with here. Malfunction Solution “No disc” Insert a CD. Insert a finalized CD-RW or CD-R. Insert the CD with the label up. Try another CD or clean the CD. Increase the distance to TV set or Bad reception DVD player. Point the antenna in a different direction.
Troubleshooting connected. Remote control Increase the volume. Disconnect the earphones. Deactivate MUTE mode. Decrease the distance to the system. does not work. Exchange the battery. Point the remote control towards the system’s IR sensor. No CD playback. Check your CD for damages or scratches. USB stick / SD memory card does Insert the CD with the label up. Use a different USB stick or SD card to check the function.
Warranty 11. Warranty This system comes with a 24-month warranty from the date of purchase. Please keep your purchase documents! In case of manufacturing or material defects the warranty consists of rectification of defects or exchange. The warranty does not include damages or malfunctions due to improper use wear and tear repairs by third parties The warranty does not include display damage firmware update accidental damage. Repair does not extend the warranty period. 11.1.
Warranty Service hotline o Austria: +43 0720 502671 – please dial with the zero! o Germany: +49 (0)180 166 66 264 621 o Switzerland: +41 (0) 848 00 3322 Contact form – www.cmx-electronics.com 11.2. Warranty has expired Please contact us by phone or contact form in case your warranty has expired. We will help you! Please inform us about the following: Unit type Purchase date Malfunction 11.3.
Warranty Attach filled-out warranty card Error description Example for error description Wrong Correct Unit is defective Unit does not respond Unit malfunctions Unit cannot be switched on Sender information: Name, address, ZIP code, city and phone number and e-mail address - 24 -
In the box 12. In the box Please contact your dealer directly in case one of the accessories is missing or damaged.
Technical specifications 13. Technical specifications CD Player Formats Audio-CD / Audio-CD-R / Audio-CD-RW MP3-CD / MP3-CD-R / MP3-CD-RW Frequency range 100 Hz ~ 16 kHz S/N ratio 50 dB Radio Frequency bands AM / FM & FM Stereo frequencies AM FM 522 – 1620 kHz 87,5 – 108 MHz Connectors Inputs AUX USB 2.0 Outputs 3,5 mm headphone speakers (left / right) Card reader SD cards MMC cards Speakers Power output Max.
Technical specifications Dimensions 101 x 170 x 152 mm General Power consumption 20 Watt Mains power AC 230 V ~ 50 Hz Dimensions 530 x 404 x 384 mm - 27 -
Technical specifications www.cmx-electronics.
