User Manual

Operational Manual
CMVision-IR3 Illuminator
Specification:
Installation:
Connection:
Notes:
The company does not warrant that this manual will be uninterrupted or error-free. We reserve the right to revise or remove any content in this manual at any time.
Feature:
CMVision infrared lighting serial products can be used for indoor and outdoor low illumination surveillance security system.Under outdoor circumstance,these
infrared illuminators can be worked and controlled by PTZ(Pan Tilt Zoom) controller,while under indoor circumstance, infrared illuminators can be fasten
to fixture or controlled by PTZ either to monitor large lobby area.To make sure infrared illuminators fully functional,special CCTV cameras featured with
low illumination,infrared ray sensitivity are required.If CCTV cameras are not sensitive to 850nm infrared, these infrared lights will not show well function.
According to physical construction and view of infrared lights,infrared lights should
be installed on wall,bracket (or PTZ controller).In order to make infrared lights
effective,best time for installation would be night time. The goal is to adjust infrared
lights to ensure camera image very clear.
The illuminator has a wired power input socket.The center of the socket is positive
pole.The socket is connected to 12V DC power supplier.
To ensure longer lifetime and more efficient,infrared light must be used with stable
12V DC power source.The voltage range should be within 12V�5%,if voltage is too
high the infrared lights will be damaged,if voltage is too low,the infrared lights will
not work properly.
This equipment has been tested and found to comply with
the limits for a class of a digital device,pursuant to part15
of the FCC Rules.These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates radio frequency,and if not
installed and used in accordance with the instruction
manual. may cause harmful interference.
Please read the Operational Manual
Before attempting to use this product
The lightning flash with arrowhead symbol,with an equilateral
triangle,is intended to alert the user to the presence of
uninsulated”dangerous voltage”within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
This exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance(servicing)instructions in the literature
accompanying the appliance.
RoHS
conform
ROHS Announcement(Option)
All lead-free products offered by the company comply with
the requirements of the European law on the Restriction of
Hazardous Substances (RoHS) directive. which means our
manufacture processes and products are strictly ”lead-free”
and without the hazardous substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the
European Union the product must be collected seperately at
the product end-of-life.This applies to your product and any
peripherals marked with this symbol. Do not dispose of these
products as unsorted municipal waste.
CE Mark
This apparatus is manufactured to comply with the radio
interference.
Inputs & Outputs
2.5 in
( 6.5cm )
3 in
( 7.5cm )
2.5 in
( 6.5cm )
2.5 in
( 6.5cm )
2.5 in
( 6.5cm )
2.5 in
( 6.5cm )
Item No.
Input voltage
CM-IR3
DC 12V
850nm
10 LuxActivate Lux
Wavelength
Product Features: IR LED
3 PCS 20mil of High Power IR LED
15-20M IR Night vision
30°/45°/60°/80°light angle is optional
Suitable for long distance IR Illumination
4 WPower Consumption
Water Resistance
Weight (g)
Storage Temperature
Operating Temperature
IP 65
150g
-30~+60℃ RH95% Max
-10~+50℃ RH95% Max