User Manual

Operational Manual
CM-IRD50 Illuminator
Specification:
Installation:
Connection:
Notes:
Feature:
According to physical construction and view of infrared lights,infrared lights should
be installed on wall,bracket (or PTZ controller).In order to make infrared lights
effective,best time for installation would be night time. The goal is to adjust infrared
lights to ensure camera image very clear.
The illuminator has a wired power input socket.The center of the socket is positive
pole.The socket is connected to 12V DC power supplier.
To ensure longer lifetime and more efficient,infrared light must be used with stable
12V DC power source.The voltage range should be within 12V�5%,if voltage is too
high the infrared lights will be damaged,if voltage is too low,the infrared lights will
not work properly.
This equipment has been tested and found to comply with the limits for a class of a digital device,pursuant to part15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates radio frequency,and if not installed and used in accordance with the instruction manual. may cause harmful
interference.
This exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance(servicing)instructions in the literature
accompanying the appliance.
RoHS
conform
ROHS Announcement(Option)
All lead-free products offered by the company comply with
the requirements of the European law on the Restriction of
Hazardous Substances (RoHS) directive. which means our
manufacture processes and products are strictly ”lead-free”
and without the hazardous substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the
European Union the product must be collected seperately at
the product end-of-life.This applies to your product and any
peripherals marked with this symbol. Do not dispose of these
products as unsorted municipal waste.
CE Mark
This apparatus is manufactured to comply with the radio
interference.
Item No.
Input voltage
CM-IRD50
DC 12V
850nm
10 LuxActivate Lux
Wavelength
Input Current 500mA
0.80
84pcs
125°-1400°
10-30m
5-10 WPower Consumption
Water Resistance
Weight
LED Size
Ambient Temperature
IP 65
0.5 lb
Ø5
~-22°F to ~+122°F [~-30°C to ~+50°C]
The lightning flash with arrowhead symbol,with an equilateral
triangle,is intended to alert the user to the presence of
uninsulated” dangerous voltage”within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
Very Low Power Consumption: Only 5-10 Watts Long Life Last for up to 50,000+ Hours. Auto activated
Optimized Circuitry: Power Factor Corrected for Maximum Efficiency 84pc IR LED, 120-140 Degree View Beam
Meets IP65 Requirements: Totally Protected against Dust; Protected against Low-Pressure Jets of Water from All Directions.
Limited Ingress Permitted.
Power Factor
Field of View
LED Lamp
Effective Distance
5 inch
5 inch