User Manual
Operational Manual
IR & LED Illuminator
CM-IRP24-850LEDPW
This equipment has been tested and found to comply with
the limits for a class of a digital device,pursuant to part15
of the FCC Rules.These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates radio frequency,and if not
installed and used in accordance with the instruction
manual. may cause harmful interference.
The company does not warrant that this manual will be uninterrupted or error-free.
We reserve the right to revise or remove any content in this manual at any time.
Feature:
IR & LED Illuminator Specification:
■ Very Low Power Consumption: Only 60 Watts
■ Long Life: White LEDs Last for up to 50,000+
Hours (5.7+ Years) of Continuous Operation
■ Optimized Circuitry: Power Factor Corrected
for Maximum Efficiency
■ 850nm Wavelength IR and 6000K LED Light Mixed
■ Highest-Grade LEDs: Uses Power LED Chip that
Meets LM-79/LM-80 Requirements
■ Meets IP65 Requirements: Totally Protected against
Dust; Protected against Low-Pressure Jets of Water
from All Directions.Limited Ingress Permitted.
LED Button Push In, LED Light On, Push Out, LED Light OFF
Lux Button Push In, Light On At Night, Push Out, Always ON
850nm Button Push In, IR On, Push Out, IR OFF
Model : CM-IRP24-850LEDPW
Power Source : DC 12V
Power Consumption : 60 W
LED lamp : Φ40mm, 12pcs
Field of View : 60° - 80°
Effective Distance : 50-100m
Emitted Color : Pure White
Color Temperature : 5000-6000K
Input Current : 4.75A
Power Factor : 0.80
Total Lumens : 3000 lm
Beam Pattern : Type V
Efficacy : 80-100 lm/W
LED Forward Current: 0.75A
Weight : 3 lb
IR Wavelength : 850nm
IR lamp : Φ40mm, 12pcs
Ambient Temperature : ~-22°F to ~+122°F [~-30°C to ~+50°C]
IR Field of View : 60° - 80°
Applications:
Landscape Lighting.Walkway Lighting.
AmusementPark Lighting. Architectural Wall Washing.
Illuminate Signs . lluminate Pathways.
Illuminate Recreation Areas.
Emergency Exit-Way Lighting.
Connection:
The illuminator has a wired power input socket.
The center of the socket is positive pole.
The socket is connected to 12V DC / AC power supplier.
Notes:
To ensure longer lifetime and more efficient,this led
illuminator must be used with stable 12V DC / AC power
source.The voltage range should be within
12V DC/AC +5%,if voltage is too high the illuminator
lights will be damaged,if voltage is too low,
the illuminator lights will not work properly.
9 in
( 20.3cm )
7.8 in ( 19.5cm )
9 in
( 20.3cm )
7.8 in ( 19.5cm )
IP65
Please read the Operational Manual
Before attempting to use this product
7.8 in ( 19.5cm )
2.5 in
( 6cm )
Inputs & Outputs
The lightning flash with arrowhead symbol,with an equilateral
triangle,is intended to alert the user to the presence of
uninsulated”dangerous voltage”within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
This exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance(servicing)instructions in the literature
accompanying the appliance.
RoHS
conform
ROHS Announcement(Option)
All lead-free products offered by the company comply with
the requirements of the European law on the Restriction of
Hazardous Substances (RoHS) directive. which means our
manufacture processes and products are strictly ”lead-free”
and without the hazardous substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the
European Union the product must be collected seperately at
the product end-of-life.This applies to your product and any
peripherals marked with this symbol. Do not dispose of these
products as unsorted municipal waste.
CE Mark
This apparatus is manufactured to comply with the radio
interference.