Thank you for choosing the CMITECK® Microphone. For best results, please take a few moments to read this manual and familiarize yourself with proper aeration and care of this microphone. The microphone from CMTECK® Is a compact microphone designed to prov de vou with outstanding sound for communicating and recording. It'sits flat on surface such as a table or a desk and utilizes the reflections from the surface to capture sound.
Features: i USB connection, np batteries required : Multipurpose condenser microphone . Compatible with Windows and Mac 360-degree coverage for great sound over a wide range : Plug and Play | does not require additional software to operate. Cancellation Tech: Bully-in MIXTEC C552.
For Windows (Take windows 7 for example} 1.Plug the microphone into your USB port of your computer using the provided USB cable. Z.To select the CHECKMATE Microphone as the default audio input device. Method 1: Go to the Start Menu and select Control Panel. Double click the Sound icon.
3. Select the Recording tab, highlight the microphone icon labeled CHECKMATE and click Set Default. Playback | Recording | Sounds | Communications Select a recording device Below to modify its settings chicane Phonetic . a_i . Contentious Set Della Fro pert make further adjustments to the recording settings, double-click on the microphone icon labeled CHECKMATE, From the drop-down menu you can change the volume for audio recording.
To get better sound quality Set both the on-board control of the mic and input/output level of computer at (When using Windows computer, if there's "Microphone Boost”, mitt 0} High volume setting is always the culprit for poor sound quality.
About the Audio Output{for Windows 7) The microphone has a built-in 3.5mm audio output{works as an external sound card). It can connect 3.
For Apple-Macintosh OSX (10.4.11 or higher) 1. Make certain that any audio applications are closed. 2, Plug the microphone into your USB port of your computer using the provided LSB cable. 3. To set the LSB microphone as the default audio input for audio, click on the Apple icon in the upper left hand of the screen dnd select System Preferences as shown the fissure below. 4.
5. After opening the Sound dialog screen, there will be three tabs at the top of the window, select the input tab by clicking on it. 6, Then select the USB Audio Codex as the device for sound input as shown in Bound Erects © Pulp Select a device for sound Input Tvs Bundle Settings Bue the se taped device input alumna: @ : In pat level Output volume: HE owe Li Show vagina 8 rem Dac 7.
About the Audio Output (for Mac O85) The microphone has a built-in 3 5mm audio outputting as an external sound card). It can connect 3.5mm audio devices like headphones, headset speakers, etc. How to use: Select the Playback tab, and choose CHECKMATE as the default device.
Question and Answer al: Ne Sound from Microphone Al: Please check USB connection, gain knob setting, mix knob setting and headphone level, QZ: Why the sound won't playback from the computer? AZ: Please check you have set up your computer according to the ‘Getting Started’ section in this manual. Make sure that CHECKMATE Microphone’ setup to be the default audio output. If your audio program was open before plugging in the microphone, you may need to close and re-open the program.
a7: The miss not recognized by my pe and mac, any suggestions? AZ: 1.Restart computer and try other USB port. 2.Check if the “USE PnP Audio Device” appears in the sound settings of computer; then the mic is able to work. not, please email us. We will provide other solution to help. (8: Doled to hook up external speakers to be able to hear other callers questions/comments? Or can Hear them through this device? AS: You will need external speakers. Thesis a mic only.
Warranty CHECKMATE microphones are guaranteed against defects in materials and workmanship for one year from the date of purchase. If you encounter any problem with this unit. promptly contact the company from which you purchased it for assistance. The original dated sales receipt will be necessary for any warranty claim. Do not send any unit directly to us without prior authorization from our service department.