Compass @ Manufacturer ATONAL Overspends fondants LIMITED LIFETIME WARRANTY Compass Manufacturing International warrants to the original consumer purchaser that the faucet be free from defects In material and workmanship for 2s long as the original consumer purchaser owns the home in which the faucet was first installed. In the event that Doreen faucets are used n a Commercial Application, this warranty s lifted for overload of 5 years, unless otherwise specifically stated In the catalog and/or price book.
+ Helpful Tools Tools: Gather the necessary tools as shown below to complete the installation of this faucet. Some may not be needed depending on the model of faucet you are installing. Plumber's Putty Flashlight and/or Silicone = Adjustable Ranch Basin Wrench Safety Glasses Screwdriver Pullers Channel Locks Maintenance Your new faucet Is designed for years of trouble-free performance. Keep It looking new by cleaning It periodically with a soft, damp cloth.
Walking The supply valves and supply lines are not included. Connect to water supply lines with either: (A) 3/8” 0.D. Copper tubing (ball nose risers with the coupling nuts or; (B) 3/8” Copper tubing (no ball) with supplied tube head interior connector or; (C) IPS faucet connectors (12") Important: Remove the aerator using the aerator wrench (#30) provided. Turn on the hot and cold water for one minute. (I . This will flush any debris from the lines that might clog the system.
. Verify the O-ring (#21) is in place on the spout place silicons sealant beneath the spout (#18) and insert the inlet (#23) through the center hole. From underneath, assemble the clamp (#25) and screw on the nut Tighten the nut (#26) using a basin wrench. . Apply silicone sealant beneath the handle and insert the brass valve body (#11) through the far left hole (hot water side).