UHF Module User Manual
1 Quick Guide 1.1 Product introduction The CMC303 is a UHF RFID Reader hybrid module which integrates high performance UHF RFID reader chipset,TCXO, Balun, Coupler, Saw filter, Power amp and low pass filter.UHF RFID reader chipset uses PR9200 of PHYCHIPS which integrates 900MHz radio, baseband processor,industry standard enhanced Cortex-M0 MCU, memory (64k Flash & 1 6k SRAM) and many other features.
1.2 Pin Description for UHF module : 1.
1.4 Product size(mm) 1.5 Packing Information Packing materials for the CMC303 shipment consist of the anti-static tray and the outer box which can hold up to five hundred pieces of the CMC303 each box.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Integration instructions for host product manufacturers according to UHF Module user manual 2.2 List of applicable FCC rules Part 15.247 2.3 Specific operational use conditions The module is limited to installation in mobile or fixed application. A separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and difference antenna configurations. 2.4 Limited module procedures Not applicable as this is not a limited modular. 2.