USER’S MANUAL CA-S10MT CM Tech Co., Ltd.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. FCC RF INTERFERENCE STATEMENT Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Multi Format Audio Player [MP3 / WMA] FM Radio / FM Broadcasting Recording Voice Recording External Data Storage [Plug & Play] TTS 2.0 [Text To Speech] Song Title Display ◎ Contents · Design and specification are subject to change without notice for product improvement purposes.
[fig-03] ◎ Accessories · User’s Manual / Installation CD / USB Cable / Small-sized USB Adaptor / Earphone (FM Antenna Embedded) / Carrying Case / Battery 1 (1.5V AAA Type) · FM radio reception sensitivity could be lowered when other earphones than the provided one are used. ◎ USB Port Inspection 1. Before program installation, please inspect the USB port first. 2. Execution Order : 'My Computer → View system information → Hardware → Device Manager' 3.
· This manual is based on Windows XP. Appearance can be different depending on the version of Windows you are using. 1. Insert the supplied CD-ROM into the CD-ROM drive of your PC. shown below should appear. If the installation program The dialog box does not start automatically, double-click ‘Install.exe’ of the CD. [fig-e05] 2. Click the ‘Install’ button on the picture to begin installation. Select the ‘MP3 Driver+TTS’ button to use the TTS function.
1. If the product is already connected to your PC, disconnect it. 2. Execute “Control Panel” → “Add or Remove Programs” to see a list of the installed programs. 3. Search the list for 'Live Music_K' and click on the “Change/Remove” button. A window will appear as shown below. Select the "Remove" button, and then click "Next", "OK" and “Finish” to complete the deletion. Restart your computer after deletion. [fig-e09] [fig-e10] [fig-e11] [fig-e12] 4.
formatting. [fig-e13] 5. When formatting is completed, press the 'Close' button to close the formatting window. [fig-e14] 6. After formatting, disconnect the product from your PC and put the battery in it. Then press the '▶/■' button and check if the power is on before you connect it to your PC again to use. ◎ Updating (After installing the program) 1. Update the firmware of the product. 2.
Class' in the device controller. (Device controller : My Computer → View system information → Hardware → Device Manager) [fig-e17] 5. Click “Start”→ “Program”→ “Live Music_K Audio Player”→ “ Live Music_K Update”. When a window appears as shown, click “Next”→ “Finish”. [fig-e18] [fig-e19] 6. The update window will appear as shown below. Then click “Start” to start updating.
8. To use the program, disconnect the USB cable from the product, wait 10 seconds, and then reconnect the USB cable to the product. When the "READY" message appears on LCD, start 'Live Music_K Explorer' on your PC. If you do not disconnect and reconnect the USB cable, the program will not run. 9. Always use the Format utility according to the “formatting procedure” after updating. 10. The pictures may be different in case of Window98 / 98SE.
music files stored in your PC. [fig-e23] 4. To search a drive for music files, select a folder or drive you want to search in the left window and press the ‘search’ button. The MP3 / WMA files that are found in the selected drive or folder will be displayed in the middle pane of the interface. 5. Drag and drop those music files you want to download from the middle pane onto the designated folder in the right window. [fig-e24] 6.
◎ Text to Speech Transformation (TTS) < Note > · TTS(Text to Speech) is a system for transforming text into voice. TTS transforms letters from the Internet or text files input by users into MP3-format voice files. (4 languages: Korean, English, Japanese, and Simplified/Traditional Chinese) · Voice files stored in the device are portable and can be heard anywhere, anytime. Please connect the device to your PC first to execute TTS.
◎ TTS File Storage 1. TTS files can be stored in the form of 'txt" files. Click the ‘Save’ icon in the upper end of TTS program and you will see a window as shown here. Choose a folder and store the contents you input as ‘txt’ file. [fig-e29] 2. TTS files can be stored in MP3. Click the ‘Generator’ icon in the upper end of TTS program and you will see a window as shown below. Input a file name and click the ‘Start’ button. [fig-e30] [fig-e31] [fig-e32] 3.
3. Input a word and click 'ADD' → 'OK'. [fig-e34] ◎ Inserting a Battery 1. Open the cover on the right side of the product by pushing it to the arrow direction and pulling it up. 2. Insert the battery according to the direction inscribed on the back and push the cover shut.
Menu MUSIC DVR Menu < Music File Playing > · Play MP3 or WMA files < Voice Playing > · Play recorded voice files FM · Listen to FM radio and set broadcasting frequency DVR REC < Voice Recording > · Record voice < EQ Setting > EQ · ROCK, POP, CLASSIC, JAZZ, NORMAL < Repeat Playing > REPEAT · RPT-1, RPT-ALL, RAND-1, RAND-ALL, NORMAL · ×0, ×1, ×2, ×3, ×4 · 0sec, 3sec, 5sec, 10sec, CON (Consecutive on) SET · 1min
< Delete All the Songs Selected in the Play List > < Move to Main Menu > < Folder List > FOLDER · Selectively play the songs in the folder only < Menu Mode Cancel > EXIT 1. Turn on the product and press the 'M' button while it is stopped to move to the menu mode. 2. There are MUSIC, DVR, FM, DVR REC, EQ, REPEAT, SET, DELETE, and EXIT functions in the menu mode. Press the '▶▶' or '◀◀' button to switch the menu to one you want. 3.
3. If you want to stop, press the '▶▶' or '◀◀' button while it is in pause. 4. If you want to play another song while a song is playing, press the '▶▶' or '◀◀' button and choose another song. 5. By pressing the '+' or '-' button in front of the product, you can control the volume up to 32 stages. < Note > · This product can store up to 256 music and voice files. · In the event of MP3 file’s playing, a text display of song titles may vary depending on the way ID3 tag was written.
button. 3. In ‘FM MODE', press the '▶▶' button to switch into 'SCAN' and return to the menu mode. 4. You have to move to ‘FM’ by pressing the '▶▶' button in the initial menu mode before you store a frequency. 5. In this status, press the '▶▶' or '◀◀' button until you find the frequency you want to store and press 'M' for a long time. Then an address to store will appear. 6. Select an address you want to use by pressing the '▶▶' or '◀◀' button and press the 'M' button to store a frequency. 7.
MODE' → 'SCAN' in menu mode and return to the menu. 6. In this state, press the '▶▶' or '◀◀' button to search for a frequency you want and listen to the radio. 7. To go out of the FM radio, press the 'M' button to move to the menu mode. ◎ FM Radio Broadcasting Recording and Hearing 1. If you want to record the FM radio broadcasting while you are listening to it, press the '▶/■' button at the point you want to start recording and press the '▶/■' button again at the point you want to finish it. 2.
◎ Repeat Playing (REPEAT) 1. If you want to listen to a song repeatedly, press '▶▶' in the menu mode to move to 'REPEAT' mode and press the ‘M’ button. 2. In this status, you can change the mode 'RPT-1 → RPT-ALL → RAND-1 → RAND-ALL → NORMAL' by pressing the '▶▶' button. Select a mode you want and press the 'M' button. 3. If you want to return to the initial state, press the 'M' button to move to 'REPEAT' mode, select ‘EXIT’ by pressing the '▶▶' button, and press the 'M' button again.
1. If you want to change the backlight time on LCD, press the '▶▶' button in the menu mode to move to 'SET' mode and press the ‘M’ button. 2. In this status, press the '▶▶' button to move to ‘BACKLIGHT’ and press the 'M' button. 3. You can change the mode '5sec → 10sec → CON (consecutive on) → 0sec → 3sec' by pressing the '▶▶' button in ‘BACKLIGHT’. Select a mode you want and press the 'M' button to return to the menu mode. ◎ Automatic Power Off (AI-OFF) 1.
3. Now, ‘YES NO EXIT’ is displayed in LCD with the file you want to delete. Using the '▶▶' or '◀◀' button, select 'YES' if you want to delete the file or select 'NO' if you don’t. If you want to change the mode, select 'EXIT' and press the 'M' button. ◎ Bookmark Function (BOOKMARK) 1. If you want to make a playback file list, press the '▶▶' button in the menu mode to move to 'BOOKMARK' mode and press the 'M' button. 2. In this status, press the '▶▶' button to move to 'EDIT' and press the 'M' button. 3.
in the menu mode to move to 'FOLDER' mode and press the 'M' button. 3. In this status, press the '▶▶' button to move to the folder you want and press the 'M' button to play the music in that folder. 4. If you want to choose another folder while you are listening to one, go to ‘FOLDER’ mode again and press the ‘M’ button shortly. You can choose only one folder at a time. 5. '☆' mark will be displayed by the selected folder.
· Check the polarity of the battery. · Power is not on. · It stops in an initial state. · Used space is displayed while there is no file stored. · Other errors of the product. · Check the remained capacity of the battery. · Remove the battery from the product, connect the product to a PC using a USB cable and power it on. When you power the product on, ‘READY’ sign will appear on the LCD. · In this status, refer to the Formatting Procedure of this manual.
· If you do not have the above devices in your PC, you cannot use a USB port. In this case, you have to so set the bios (CMOS) environment that you can use a USB port. · Contact the sales agent for a detailed setting method.
Sales Date yy mm dd Customer Name Address Telephone Sales Agency Name Address Telephone Customer Support Center · If an error occurs, please contact the sales agency.