USER’S MANUAL CA-K20MT CM Tech Co., Ltd.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. FCC RF INTERFERENCE STATEMENT Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
◎ PC System Requirements · Processor: Pentium 233MHz or better · Windows98 / 98SE / ME / 2000PRO / XP · Hard Disc: 1GB or more available · Memory: 64MB DRAM or better · Monitor Resolution: 1024 x 768, 16Bit Color or better recommended · USB Port mounted · CD-ROM drive to install Software ◎ Description of Product Part · Front [fig-e01] · LCD Screen / Menu Button / Volume Control Button / Rewind Button / Fast Forward Button / Play/Pause Button · Rear [fig-e02] · Earphone Jack / Microphone / Necklace Holde
◎ Accessories - User’s Manual - Installation CD - USB Cable - Small-sized USB Adaptor - Earphone (FM Antenna Embedded) - Carrying Case / Battery 1 (1.5V AAA Type) FM radio reception sensitivity could be lowered when other earphones than the provided one are used.> ◎ USB Port Inspection 1. Before program installation, please inspect the USB port first. 2. Execution Order : 'My Computer → View system information → Hardware → Device Manager' 3.
‘Install.exe’ of the CD. [fig-e05] 2. Click the ‘Install’ button on the picture to begin installation. Select the ‘MP3 Driver+TTS’ button to use the TTS function. (Usually it takes about 5 minutes if TTS is selected. The necessary time is somewhat different depending on the PC environment.) 3. Click "Next" → "Finish" to complete the installation and restart your PC. [fig-e06] [fige07] 4. After your PC has restarted, you will see the 'Live Music_K Explorer' icon on your PC. 5.
◎ Program Deletion 1. If the product is already connected to your PC, disconnect it. 2. Execute “Control Panel” → “Add or Remove Programs” to see a list of the installed programs. 3. Search the list for 'Live Music_K' and click on the “Change/Remove” button. A window will appear as shown below. Select the "Remove" button, and then click "Next", "OK" and “Finish” to complete the deletion. Restart your computer after deletion.
4. If the installation was not successful or if you need to reinstall the program for any reason, follow the program deletion procedure and put the CD-ROM in for installation. · If you want to delete the TTS program, execute 'Controller' → 'Add or Remove Programs’. Then search the list for 'TTSPad 2.0' and click “Change/Remove” to start deleting. ◎ Formatting (After installing the program) 1. Please execute formatting periodically for the efficient use of the memory. 2.
5. When formatting is completed, press the 'Close' button to close the formatting window. [fig-e14] 6. After formatting, disconnect the product from your PC and put the battery in it. Then press the '▶/■' button and check if the power is on before you connect it to your PC again to use. ◎ Updating (After installing the program) 1. Update the firmware of the product. 2.
4. After installation is completed, check if there is 'Player Recovery Device Class' in the device controller. (Device controller : My Computer → View system information → Hardware → Device Manager) [fig-e17] 5. Click “Start”→ “Program”→ “Live Music_K Audio Player”→ “ Live Music_K Update”. When a window appears as shown, click “Next”→ “Finish”. [fig-e18] [fig-e19] 6. The update window will appear as shown below. Then click “Start” to start updating.
7. When updating is completed, press the “Close” button to close the update window. [fig-e21] 8. To use the program, disconnect the USB cable from the product, wait 10 seconds, and then reconnect the USB cable to the product. When the "READY" message appears on LCD, start 'Live Music_K Explorer' on your PC. If you do not disconnect and reconnect the USB cable, the program will not run. 9. Always use the Format utility according to the “formatting procedure” after updating. 10.
3. Press the 'Search' button in the upper end of the program to search for the music files stored in your PC. [fig-e23] 4. To search a drive for music files, select a folder or drive you want to search in the left window and press the ‘search’ button. The MP3 / WMA files that are found in the selected drive or folder will be displayed in the middle pane of the interface. 5. Drag and drop those music files you want to download from the middle pane onto the designated folder in the right window.
7. Once the USB cable is disconnected, the device will be automatically powered on. Press the '▶/■' button to play the music. 8. If an error occurs, follow the formatting procedure described above. · When you open My Computer or launch Windows Searcher, you will see the removable disk icon. You can then copy MP3 / WMA files to the removable disk. · The order of songs played by the device depends on the file name, especially on the first letter of the name.
3. Input a sentence and press the '▶' button to hear the sentence. [fig-e28] ◎ TTS File Storage 1. TTS files can be stored in the form of 'txt" files. Click the ‘Save’ icon in the upper end of TTS program and you will see a window as shown here. Choose a folder and store the contents you input as ‘txt’ file.
2. TTS files can be stored in MP3. Click the ‘Generator’ icon in the upper end of TTS program and you will see a window as shown below. Input a file name and click the ‘Start’ button. [fig-e30] [fig-e31] [fig-e32] 3. To complete generating a file, click the ‘OK’ button in the LiveMusic_K’window after clicking the ‘Start’ button. ◎ Dictionary Use 1. In Dictionary, reading and defining words are possible.
3. Input a word and click 'ADD' → 'OK'. [fig-e34] ◎ Inserting a Battery 1. Open the cover on the right side of the product by pushing it to the arrow direction and pulling it up. 2. Insert the battery according to the direction inscribed on the back and push the cover shut.
◎ Button Operation by Modes Button ▶/■ ▶▶ / ◀◀ Normal Mode · Power on / off · Playback / Pause Menu Mode · Power on / off · Power on / off · Frequency search · Search · Stop (Pause) · Menu Change · Memory Address Change · Frequency Storage · Section · Mode Selection Repetition Setting + / - · FM Recording / Stop · Menu M FM Mode · FM Mode Cancellation · Volume Control (0~32 stages) ◎ Menu Function Mode Main Menu MUSIC DVR Sub Menu 2nd Sub Contents Menu < Music File Playing > · Play
· 0sec, 3sec, 5sec, 10sec, CON (Consecutive on) · 1min, 2min, 5min, 10min, DISABLE (Consecutive on) · SCAN : Scan broadcasting frequency and store it · PRESET : Select the stored broadcasting frequency to hear < File Deletion > DELETE · MUSIC(MP3, WMA), VOICE, EXIT < Bookmark Not Used > < Edit the Play List > BOOKMARK < Delete All the Songs Selected in the Play List > < Move to Main Menu > < Folder List > FOLDER · Selectively play the songs in the
· → Pressing the '▶▶/◀◀' button to choose EQ (ROCK, POP, CLASSIC, JAZZ) → 'M' button · → Pressing the '▶▶/◀◀' button to choose 'EXIT' → 'M' button → Set EQ display on the upper end of LCD ◎ Music File Playing 1. Turn on the product and press the '▶/■' button to play music. Press the button one more time to pause. 2. Select a song you want to play and press the playback button. When the button is pressed, the song title will scroll across the LCD from right to left. 3.
2. '●' or 'REC' message will appear in the LCD screen during recording. Press the ‘M' button again to stop recording. 3. When you want to play the recorded contents, move the '▶▶' button to 'DVR' mode in the menu mode and press the 'M' button. 4. To play the recorded voice, press the '▶/■' button. Press it one more time to pause. 5. To return to the initial state, press the '▶▶' button in a pause state to change to stop state and press the 'M' button. ◎ FM Radio Frequency Storage 1.
6. Select an address you want to use by pressing the '▶▶' or '◀◀' button and press the 'M' button to store a frequency. 7. To return to the initial state, press the 'M' button shortly. ◎ FM Radio Hearing 1. If you want to listen to FM radio of the frequency you store, go to 'SET' → 'FM MODE' → 'PRESET' and return to the menu mode. 2. In the initial menu mode, move to ‘FM’ mode by pressing the '▶▶' button and press the 'M' button. 3.
7. To go out of the FM radio, press the 'M' button to move to the menu mode. ◎ FM Radio Broadcasting Recording and Hearing 1. If you want to record the FM radio broadcasting while you are listening to it, press the '▶/■' button at the point you want to start recording and press the '▶/■' button again at the point you want to finish it. 2. '●' will appear in the LCD screen during recording. 3. The recorded file is stored in the voice folder of the product.
find the tone you want by pressing the '▶▶' button and press the ‘M’ button to select one. 3. To return to the menu mode, move to EQ mode by pressing the ‘M’ button and press the ‘M’ button again after selecting EXIT by using the '▶▶' button. ◎ Repeat Playing (REPEAT) 1. If you want to listen to a song repeatedly, press '▶▶' in the menu mode to move to 'REPEAT' mode and press the ‘M’ button. 2.
3. You can change the mode 'x4 → x0 → x1 → x2 → x3' by pressing the '▶▶' button. Select a mode you want and press the 'M' button to return to the menu mode. ◎ Backlight (BACKLIGHT) 1. If you want to change the backlight time on LCD, press the '▶▶' button in the menu mode to move to 'SET' mode and press the ‘M’ button. 2. In this status, press the '▶▶' button to move to ‘BACKLIGHT’ and press the 'M' button. 3.
'M' button to return to the menu mode. ◎ Deleting File (DELETE) 1. If you want to delete a file stored in the product, press the '▶▶' button in the menu mode to move to 'DELETE' mode and press the ‘M’ button. 2. In this status, press the '▶▶' button to select a music or voice file and press the 'M' button. 3. Now, ‘YES NO EXIT’ is displayed in LCD with the file you want to delete. Using the '▶▶' or '◀◀' button, select 'YES' if you want to delete the file or select 'NO' if you don’t.
4. Move to a song you want to choose by pressing the '▶▶' or '◀◀' button and press the 'M' button to select it. [fig-e36] 5. After selection, press the '▶/■' button to play the songs you have chosen. If you select ‘Delete/Add File’ or ‘Folder’ with ‘Bookmark’ displayed, all the chosen songs will be deleted and the file list be initialized. ◎ Folder List (FOLDER) 1. In order to use ‘Folder List’, you should make a new folder by clicking the right button of the mouse on ‘Removable Disc’. 2.
7. If there are more than 20 folder in ‘Removable Disc’, it may take longer than normal to turn on the unit. ◎ Hold Function (HOLD) 1. This function is used to keep other functions from working while the product is running. 2. Push the 'HOLD' switch at the bottom of the product to the arrow direction and the other key function will not work. 3. At this state, the 'Lock Mark will be displayed at LCD panel. To escape, return the HOLD switch to the other side.
computer → System Information → Hardware → Device Controller) · If it is not caught normally as below, click the right button of the mouse to delete it. (In case of Window 98 / 98SE) [fig-e37] (In case of ME / 2000PRO / XP) [fig-e38] · After deletion, click 'hardware change search' icon in the upper end to newly install the device. · When it is normally installed, the yellow exclamation mark in the front will disappear.
◎ Product Specification MP3/WMA Player / FM Tuner / Voice Recorder / Main Function Memory Removable Disc 256MB 256MB Flash Memory 128MB 128MB Flash Memory 64MB 64MB Flash Memory Interface USB USB Port File Transmission Speed 7Mbps Display 96×64 dot FSTN LCD (EL backlight) Voice 256MB 16 hours Recording 128MB 8 hours Time 64MB 4 hours Battery AAA Type 1EA Operating Time 12-hour consecutive play (Alkaline battery used) Output Power 5mW×2 (16Ω) S/N (Noise Ratio) 90dB (20KHz LPF)
◎ Guarantee Product MP3 Player (CA-K20MT) Assurance Period 1 year Sales Date yy mm dd Customer Name Address Telephone Sales Agency Name Address Telephone Customer Support Center · If an error occurs, please contact the sales agency.
