USER’S MANUAL CA-H70MT CM Tech Co., Ltd.
Multi Format Audio Player [MP3 / WMA] FM Radio / FM Broadcasting Recording Voice Recording External Data Storage [Plug & Play] TTS 2.0 [Text To Speech] Song Title Display THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
· Design and specification are subject to change without notice for product improvement purposes.
5. USB port cannot be used if there is no 'Universal Serial Bus Controllers'. In such a case, please ask the sales agent of your PC for its service before installation. ◎ Program Installation < Caution > · Before installation, please disconnect other USB products connected to the USB port. · Do not connect the product to your PC until successfully installing the program. If you have already connected the product to your PC, disconnect it before proceeding. < Note > · This manual is based on Windows XP.
◎ Program Deletion 1. If the product is already connected to your PC, disconnect it. 2. Execute “Control Panel” → “Add or Remove Programs” to see a list of the installed programs. 3. Search the list for 'Live Music_K' and click on the “Change/Remove” button. A window will appear as shown below. Select the "Remove" button, and then click "Next", "OK" and “Finish” to complete the deletion. Restart your computer after deletion. [fig-e09] [fig-e10] [fig-e11] [fig-e12] 4.
5. When formatting is completed, press the 'Close' button to close the formatting window. [fig-e14] 6. After formatting, disconnect the product from your PC and put the battery in it. Then press the '▶/■ ' button and check if the power is on before you connect it to your PC again to use. ◎ Updating (After installing the program) 1. Update the firmware of the product. 2.
5. Click “Start”→ “Program”→ “Live Music_K Audio Player”→ “ Live Music_K Update”. When a window appears as shown, click “Next”→ “Finish”. [fig-e18] [fig-e19] 6. The update window will appear as shown below. Then click “Start” to start updating. (In case of Window98/98SE, you need to click “Start”→ “Programs”→ “Live Music_K Audio Player”→ “Live Music_K Update” again to see the update window. [fig-e20] 7. When updating is completed, press the “Close” button to close the update window. [fig-e21] 8.
◎ How to Download a Music File to the Product 1. With the battery installed in the device, power up the device and connect it to the USB port on your PC. 2. When the "READY" message appears on the LCD, click the 'Live Music_K Explorer' icon on your PC to launch the program. [fig-e22] 3. Press the 'Search' button in the upper end of the program to search for the music files stored in your PC. [fig-e23] 4.
· The order of songs played by the device depends on the file name, especially on the first letter of the name. If the first letter of a song is a special character, that song will be played first. Next, comes a song with a numeral. After the numeral, the order is then arranged by an English character, a Chinese character, and a Japanese character. ◎ Text to Speech Transformation (TTS) < Note > · TTS(Text to Speech) is a system for transforming text into voice.
program and you will see a window as shown here. Choose a folder and store the contents you input as ‘txt’ file. [fig-e29] 2. TTS files can be stored in MP3. Click the ‘Generator’ icon in the upper end of TTS program and you will see a window as shown below. Input a file name and click the ‘Start’ button. [fig-e30] [fig-e31] [fig-e32] 3. To complete generating a file, click the ‘OK’ button in the ‘LiveMusic_K’window after clicking the ‘Start’ button. ◎ Dictionary Use 1.
Button ▶/■ ▶▶ / ◀◀ Normal Mode · Power on / off · Playback / Pause Menu Mode · Power on / off · Power on / off · Frequency search · Search · Stop (Pause) · Menu Change · Memory Address Change · Frequency Storage · Section Repetition · Mode Selection Setting +/- · FM Recording / Stop · Menu M FM Mode · FM Mode Cancellation · Volume Control (0~32 stages) ◎ Menu Function Mode MUSIC DVR Main Sub 2nd Sub Menu Menu Menu Contents < Music File Playing > · Play MP3 or WMA files < Voice Playi
· SCAN : Scan broadcasting frequency and store it · PRESET : Select the stored broadcasting frequency to hear < File Deletion > DELETE · MUSIC(MP3, WMA), VOICE, EXIT < Bookmark Not Used > < Edit the Play List > BOOKMAR K < Delete All the Songs Selected in the Play List > < Move to Main Menu > < Folder List > FOLDER · Selectively play the songs in the folder only EXIT < Menu Mode Cancel > 1. Turn on the product and press the 'M' button while it is stopped to move to the menu mode. 2.
4. If you want to play another song while a song is playing, press the '▶▶' or '◀◀' button and choose another song. 5. By pressing the '+' or '-' button in front of the product, you can control the volume up to 32 stages. < Note > · This product can store up to 256 music and voice files. · In the event of MP3 file’s playing, a text display of song titles may vary depending on the way ID3 tag was written. · This product supports ID3v1/v2. It will display the song title of ID3 if there is ID3 data.
6. Select an address you want to use by pressing the '▶▶' or '◀◀' button and press the 'M' button to store a frequency. 7. To return to the initial state, press the 'M' button shortly. ◎ FM Radio Hearing 1. If you want to listen to FM radio of the frequency you store, go to 'SET' → 'FM MODE' → 'PRESET' and return to the menu mode. 2. In the initial menu mode, move to ‘FM’ mode by pressing the '▶▶' button and press the 'M' button. 3.
4. In case of a 128MB-memory product, you can record FM radio broadcasting up to some 1 hour and 40 minutes. ◎ Equalizer Function (EQUALIZER) 1. To control the music tone, press the '▶▶' button in the menu mode to move to the 'EQ' mode and press the 'M' button. 2. In this state, you can change the mode 'ROCK → POP → CLASSIC → JAZZ → NORMAL' until you find the tone you want by pressing the '▶▶' button and press the ‘M’ button to select one. 3.
2. In this status, press the '▶▶' button to move to ‘SCROLL’ and press the 'M' button. 3. You can change the mode 'x4 → x0 → x1 → x2 → x3' by pressing the '▶▶' button. Select a mode you want and press the 'M' button to return to the menu mode. ◎ Backlight (BACKLIGHT) 1. If you want to change the backlight time on LCD, press the '▶▶' button in the menu mode to move to 'SET' mode and press the ‘M’ button. 2. In this status, press the '▶▶' button to move to ‘BACKLIGHT’ and press the 'M' button. 3.
3. Now, ‘YES NO EXIT’ is displayed in LCD with the file you want to delete. Using the '▶▶' or '◀◀' button, select 'YES' if you want to delete the file or select 'NO' if you don’t. If you want to change the mode, select 'EXIT' and press the 'M' button. ◎ Bookmark Function (BOOKMARK) 1. If you want to make a playback file list, press the '▶▶' button in the menu mode to move to 'BOOKMARK' mode and press the 'M' button. 2. In this status, press the '▶▶' button to move to 'EDIT' and press the 'M' button. 3.
the '▶▶' or '◀◀' button and press the '▶/■' button after pressing the 'M' button to play the music in that folder 6. To cancel the ‘Folder’ function and listen to the whole music, return to 'FOLDER' mode and press the 'M' button for a long time. 7. If there are more than 20 folder in ‘Removable Disc’, it may take longer than normal to turn on the unit. ◎ Hold Function (HOLD) 1. This function is used to keep other functions from working while the product is running. 2.
[fig-e37] (In case of ME / 2000PRO / XP) [fig-e38] · After deletion, click 'hardware change search' icon in the upper end to newly install the device. · When it is normally installed, the yellow exclamation mark in the front will disappear. · Check 'Control Board → System (System Registration Information) → Device Controller and see if there is ‘USB Controller (General Series Bus Controller, Universal Series Bus Controller).
Net Weight (without Battery) g ◎ Guarantee Product MP3 Player Assurance Period 1 year Sales Date yy mm dd Customer Name Address Telephone Sales Agency Name Address Telephone Customer Support Center · If an error occurs, please contact the sales agency.