Installation Guide

Installation
1. Install ceiling hooks (not provided) 14.25” apart.
2. Hang the sign with the provided cable set (Fig. 1).
A. Press and hold the Release Button on the gripper.
B. Feed the cable into the Release Button and out the
side, let go of button ensuring the cable is gripped.
C. Place the provided S-hooks thru the loops at the end
of the cables and attach to the top of the sign.
D. Press the Release Button again on each gripper
to slide the cables until the sign is level and at the
desired height.
E. Cut excess cable with scissors.
3. Insert the power cord into the back of the sign and plug
the adapter into a grounded outlet.
4. On the back of the sign, set the power switch to the
REMOTE position to control the sign via remote control.
(Remote includes 27A battery; Range: 50 feet)
5. On the side of the remote control, switch the power
to the ON position and press the ON or OFF button to
control the sign(s).
08/2021
CAUTION - To reduce the risk of re,
electric shock or injury:
• Hang signs together per the Approved Hanging
Options ONLY. Other hanging congurations
will aect proper power current and damage may
occur. Improper installation is not covered under
warranty. Follow diagrams on back side.
• This product is for indoor use only.
Do not use in damp or wet locations.
• Not for use with light dimmer circuits.
• To reduce the likelihood of injury or damage,
mount only to a mechanically sound surface.
• Do not use extension cords or outlets with
inadequate current carrying capacity.
• It is recommended to use a surge protector.
Power surges ARE NOT covered under
warranty for this product.
• Only use power adapter supplied with sign.
• Do not handle adapter or sign with wet hands.
• Disconnect power before handling or cleaning.
• Do not use liquid cleaners or aerosol cleaners.
Use a dry cloth for cleaning.
• This product is fully assembled and ready to use.
Do not attempt to disassemble or service.
• Do not alter the plug or power supply cord in
any way.
LED SIGNS
Limited 3 Year Warranty
C-M Glo, LLC warrants that this product will be
free from defect due to material and workmanship
under normal use for a period of three (3) years
and warrants the power supply for two (2) years
from the date of purchase. Please retain receipt for
proof of purchase. Proof of purchase is required for
any warranty claim. Warranty is void if product is
abused, disassembled, or exposed to atmosphere or
conditions other than stated within instructions. If
product fails within the specied time, contact C-M
Glo at the address below for return details. Your
sign will be repaired or replaced within six weeks.
For Sales Outside of North America: These
signs are warranted for a period of 3 years after
purchase by the end user, provided the sign is
installed within one year of the production date on
the sticker on the back of the sign. This one year
allows for transit, storage at a distributor, etc. Proof
of purchase by the end user within one year of the
production date will be required.
C-M Glo, LLC
1201 N. 4th Street, Watertown, WI 53098
[phone] • [e-mail]
DISCLAIMER OF WARRANTY
All signage products manufactured by CM Global are warranted to
be free from defects in material and workmanship under normal use
and service, and providing that no alterations have been made to the
product and that the product shall be used in accordance with printed
instructions, operating temperatures, and operated in circuits of voltage
stamped on the nameplate. Except as otherwise provided in this War-
ranty, our obligation under this warranty shall be limited to replacing
or repairing, at our option, any parts which shall be demonstrated to
be defective within THREE (3) YEARS after the date of purchase by
the user. Only CM Global sold transformers/power supplies may be
used with CM Global signs. Any third party transformer/power supply
used and not purchased through CM Global will void the product
warranty. We shall, upon prompt, written notice and compliance by the
user with such instructions as our Customer Service Department shall
give with respect to the return of defective products or parts, correct
such defect by repair or replacement of the defective part or parts.
Correction in the manner provided above shall constitute a fulllment
of all of our liabilities with respect to the quality of the products. Our
liability arising from or in any way connected with the products sold,
the delivery or any delay with respect thereto or otherwise arising from
or relating to this Warranty shall be limited exclusively, and at our
sole election, to either repair or replacement of products sold refund
of the purchase price. Replacement or repair of any component does
not extend the warranty period of sign. This warranty does not cover
misuse or abuse, unauthorized repair, alteration or disassembly by
unauthorized personnel; or operation by improper voltage or current
(including power surges). In no event shall CM Global be liable for
any incidental, consequential, or special damages of any kind or nature
whatsoever, including, but not limited to, lost prots arising from or
in any way connected with this Warranty, or items sold hereunder,
whether alleged to arise from breach of contract, express or implied
warranty, or in tort, including, without limitation, negligence, failure to
warn or strict liability.
Subway Sign
Model #950910
18V 5A power supply
Fig. 1
Subway
®
Indoor LED Signs Installation Guide
Open Sign
Model #970000
18V 3A power supply
Choice Mark Sign
Model #950900
18V 3A power supply
Add-On Message Signs
Does NOT include a power supply --
signs powered by the Open Sign.
Hang up to 3 from each Open Sign
#970001
#970002
#970003
#970004
#970005
#970006
Maximum of
3 Add-On Signs
To level sign and
adjust height:
Press and hold
Release Button to
slide cable up/down
Approved Hanging Options
***Always use power supply included with TOP SIGN***
Available Sign Models
All signs sold separately.
Hanging hooks
& patch cord
included with
Subway Sign
Hanging hooks
& patch cord
included with
Choice Mark Sign
Each Add-On sign plugs
into sign above
3A power
supply
3A power
supply
Switch
sign to ON
position
5A power
supply
Remote control model ： Remote B-2/Remote B-3
Remote control model ：
Remote B-2/Remote B-3
Remote control model ：
Remote B-2/Remote B-3