Cloudleaf Data Logger 4.3 Model: S-4.3, SKU: ST12I-G2N User Guide Oct 24, 2019 Disclaimer Cloudleaf, Inc.
The information and know-how included in this document are the exclusive property of Cloudleaf Inc. and are intended for the use of the addressee or the user alone.
Table of Contents Introduction ................................................................................................................. 4 S-4.3 Features............................................................................................................... 5 Logging functionality .......................................................................................................... 5 Motion Sensing ........................................................................................
Safety and Warnings ..................................................................................................... 8 FCC STATEMENT ................................................................................................................ 8 FCC Warning ....................................................................................................................... 8 Introduction The S-4.3 data logger sensor tag [S-4.3 tag] is a key component of the Cloudleaf System. The S-4.
S-4.3 Features Logging functionality S-4.3 Tags can log environmental sensors [ temperature, humidity and pressure] at set periodic time. For each instance of logging, the logger logs the time along with the sensor data. The data is cleared upon the receipt of “Cloudleaf cloud receiving the data” message. Motion Sensing S-4.3 Tags contain on-board motion sensors. The motion sensor can be configured to trigger alerts.
Long Battery Life A powerful battery provides power for a period of at least 6 months and is based on usage. When a battery is changed, any data not yet uploaded from the logger is lost. Compatibility and Non-interference Cloudleaf Tags are based on Bluetooth Low Energy. The use of the unlicensed 2.4GHz frequency band at low power levels avoids interference with other wireless equipment, making Cloudldeaf tags safe for use with such sensitive equipment.
Indoor range: Up to 50m Environmental Specifications • • • Temperature: -40°C to +85°C Humidity: 5 to 95%RH Avoid spilling of water on tag. If water gets into the humidity sensors, the sensor requires 2 days to recover from water saturation. RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE).
Certification Radio • FCC Part 15, sub-part C class B, sub-part B Safety and Warnings FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.