User's Manual

ManualsBrandsCloud AIR-WIFI ManualsComputers & Accessories4G Wireless Data Terminal

User Manual

■Technical Specification

Certification Model No.:CAW20A101

Main Network

FDD-LTE：B2/4/5/7/12/13/17/25/26/66

TDD-LTE：B41

WCDMA：B2/4/5

GSM: 850/1900

CPU : QUALCOMM QM215

Pixel : QVGA(240*320)

Display Size: 2.4 inch

Weight: 130g

Size: 126X68X12.1mm

Max data rate:UL50Mbps

Box content:

Device, user manual, Type-C cable,

SIM removal tool

Encryption method: WPA2 PSK

Radio frequency band: 2.4GHz

WiFi-enabled devices simultaneously max : 10

SIM card : 1 Nano SIM

Voltage&Capacity: 3000mAh(typical)/3.8V

WLAN：2.4G; 802.11 b/g/n

Max data rate:DL150Mbps

■Display – icon

Number of device connections

Signal strength

Battery level

■Display - 1

Accumulated flow / SSID

It is possible to confirm the total data amount, SSID and password.

QR code

You can connect easily by scanning theQR code from your smartphone.

※If your smartphone doesn’t support this function, please search SSID

and input password manually.

It is possible to block(unblock) the devices which you don’t want to

connect with AIR-1.

Connected device Management

You can connect to the internet without wi-fi function by connecting to

the windows PC with USB cable.

※This function is not supported Mac.

USB tethering

■Display - 2

Data management

Enable this function to prevent massive data usage of:

・Automatic app download and update.

・Automatic sync of cloud apps.

※If you can’t access to the App Store, please turn this function off.

Physical SIM card management

If you insert your own SIM card into AIR-1, you can connect to the internet.

Please turn off the power when you insert the sim.

APN settings are not supported.

Please try this function when data communication is not stable.

Network optimization

Please select your language.

Language settings

Software Update

You can confirm the software version.

※ It is impossible to update the software by yourself.

Device information

You can confirm device information and restore factory settings.

※Please use this function if you want to reset SSID and password.

■Display - 3

■How to use AIR-1

Turn on AIR-1

Press the power button for over three seconds.

Internet connection

The signal strength icon appears when AIR-1 is connected to the internet.

※It takes a few minutes to connect to the internet.

Tap「Data usage / SSID」and confirm SSID and

password.

Connect to AIR-1 from your device

Select the SSID of AIR-1 from your smartphone, PC and input the password.

You are ready to connect to the internet.

■How to use AIR-1(USB tethering)

Connect AIR-1 to your windows PC via USB cable.

Tap the「USB tethering」and turn on the function.

You are ready to connect to the internet.

※This function is not supported Mac.

■Warning

1　SIM Card Tray

2 Power Button

3　Touch Display

4　Type C Port

■Product Overview

※The information in this instruction manual may differ depending on the software version.

Please reboot AIR-1 in case you cannot access the internet.

Please contact your service provider if you have any questions about

・the details of your contract.

・trouble, lost or stolen.

■

Remarks

Specific Absorption Rate (SAR) Information of this product

This product complies with the Japanese technical regulations and the international guidelines

regarding

human exposure to radio waves. This product was designed in observance of the Japanese technical

regulations regarding exposure to radio waves (*1) and the limits of exposure recommended in the

international guidelines, which are equivalent to each other. The international guidelines were set out by

the International Commission on Non-Ionizing Radiation Protection (ICNIRP), which is in collaboration with

the World Health Organization (WHO), and the permissible limits include substantial safety margins

designed to assure the safety of all persons, regardless of age and health conditions.

The technical regulations and the international guidelines set out the limits of exposure to radio waves as

the Specific Absorption Rate, or SAR, which is the value of absorbed energy in any 10 grams of human

tissue over a 6-minute period. The SAR limit for mobile phones is 2.0 W/kg.The highest SAR value for This

product when tested for use near the head is 1.044 W/kg (*2).There may be slight differences of the SAR

values in individual product, but they all satisfy the limit. The actual value of SAR of This product while

operating can be well below the indicated above. This is due to automatic changes in the power level of

the device to ensure it only uses the minimum power required to access the network.

This product can be used in positions other than against your head. By using accessories such as a belt

clip holster that maintains a 0.5cm separation with no metal (parts) between it and the body, this mobile

phone is certified the compliance with the Japanese technical regulations and the internation-al

guidelines.

The World Health Organization has stated that "a large number of studies have been performed over the

last two decades to assess whether mobile phones pose a potential health risk. To date, no adverse

health effects have been established as being caused by mobile phone use."

*1 The technical regulations are provided in Article 14-2 of Radio Equipment Regulations, a Ministerial

Ordinance of the Radio Act.

*2 This value includes wireless features that can be used simultaneously.

Note: This equipment has been tested and complies with the limits for a class B digital device, pursuantto

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications.

However, there is no guarantee that interference will not occur during installation. If the device does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is suggested to try to correct the interfernce by the following measures:

--Reorient or relocate the receiving antenna.

--Increase the distsnce between the equipment and receiver

--Connect the equipment to an outlet on different circuit to the receiver

--Consult the manufacturer or an experienced radio/TV technician for help.

Information on the disposal and recycling of the devices.

This symbol (with or without a solid bar) on the device, batteries (if included), and/or the

packaging, indicates that the device and its electrical accessories (for example, a headset,adapt-

er,or cable) and batteries should not be disposed of as household garbage. These items should not

be disposed of as unsorted municipal wasted and should be taken to a certified collection point

for recycling or proper disposal. For detailed information about device or battery recycling,

contact your local city office, housedhold waste disposal service, or retail store.

Disposal of the device and batteries ( if included) is subject to WEEE. Directive recast (Directive

2012/19/EU) and battery dirctive (Directive 2006/66/ec). The purpose of separating WEEE and

batteries from other waste is to minimize the potential environmental impacts and human health

risk of any hazardous subsatances that may be present.

*Please refer to the WHO website if you would like more detailed information.

https://www.who.int/peh-emf/publications/factsheets/en/

*Please refer to the websites listed below if you would like more detailed information regarding SAR. Ministry

of Internal Affairs and Communications Website: https://www.tele.soumu.go.jp/e/sys/ele/index-.htm

Association of Radio Industries and Businesses Website:

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause.

*Undesired operation. Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

*Specific Absorption Rate (SAR) information. SAR tests are conducted using standard operating

positions accepted by the FCC with the device transmitting at its highest certified power level in all

tested frequency bands, although the SAR is determined at the highest certified power level, the

actual SAR level of the device while operating can be well below the maximum value, in general,

the closer you are to a wireless base station antenna, the lower the power output

Before a new device can be made available for sale to the public, it must be tested and certified by

the FCC that it does not exceed the exposure limit established by the FCC, Tests for each device are

performed in positions and locations as required by the FCC. For body worn operation, this device

has been tested and meets the FCC RF exposure guidelines when used with an accessory

designated for this product or when used with an accessory that contains no metal and that

positions the device a minimum of 1.0 cm from the body.

*This product is of a Portable type, and the distance from the human body during normal use is

>10mm, RF exposure limit is 1.6W/Kg. The highest reported RF exposure value to 1.34 W/kg.