ClonerAlliance Flint D4P User Manual
ClonerAlliance Flint D4P User Manual This documentation describes how to use ClonerAlliance Flint D4P (Model: CA-1480FPP) device. Copyright Notice Copyright © ClonerAlliance Inc. All rights reserved. Documentation Version 1.0.
Safety Notices Before using ClonerAlliance Flint D4P, please ensure that you read and understand the safety precautions below: 1. Do not attempt to open the case of ClonerAlliance Flint D4P or modify it in any way, as this will void the warranty. 2. Keep ClonerAlliance Flint D4P away from water and other liquids, as this may cause the unit to malfunction. 3. ClonerAlliance Flint D4P may become warm during use. This does not indicate malfunction. 4.
CONTENTS 1 Getting Started 1 1.1 Box Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1.2 Product Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 Software Installation 5 2.1 Install and register HDML-Cloner Pro Helper (Windows Users) . . . . . . . . . . . . . . . . . . . . .
7.2 Record/capture game console videos to PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 8 Play game console on PC without TV 56 8.1 Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 8.2 Play game console for Windows users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GETTING STARTED 1.1 Box Contents a. b. c. d. e. • a. Remote Control • b. ClonerAlliance Flint D4P • c. User Manual • d. HDMI cable • e. Male Type-C to male USB 3.
ClonerAlliance Flint D4P User Manual 1.2 Product Diagram 1 1. 2. 3. 4. 2 3 4 LINE OUT: Insert the headphone plug into this jack to output the video sound. MIC: Insert the microphone plug into this jack to input voice. LINE IN: Stereo audio inputs. IR Window: Receives the IR signal from the remote control. 1.2.
ClonerAlliance Flint D4P User Manual 5 6 7 8 9 10 5. HD2 IN 4K/30: Connect an HDMI cable with the input video up to 4K@30fps. 6. HD1 IN 4K/60: Connect an HDMI cable with the input video up to 4K@60fps. 7. EXT.AUDIO IN: Connect an audio cable between an external input audio source and ClonerAlliance Flint D4P if needed. It’s an optional port. 8. OUT: Connect an HDMI cable between ClonerAlliance Flint D4P and TV. 9.
ClonerAlliance Flint D4P User Manual Power on/Power off. Quick screen switching(HD1 and HD2). Select HD1 as the input signal. Select HD2 as the input signal. PIP mode. POP mode. PMP mode. Select HD1 audio for sound. Select HD2 audio for sound. Select EXT. audio for sound. Switch output resolution settings(Only works when not connected to PC). Switch screen size in PIP mode. OK button. Left button: moving left for PIP mode. Right button: moving right for PIP mode. Up button: moving up for PIP mode.
SOFTWARE INSTALLATION 2.1 Install and register HDML-Cloner Pro Helper (Windows Users) Tips: For Windows users, HDML-Cloner Pro Helper or third party software like OBS, VLC, etc can be used with Flint D4P. For Mac or Linux users, please download third party software like OBS Mac/Linux version accordingly to work with Flint D4P. 1.
ClonerAlliance Flint D4P User Manual Note: Prior to installing HDML-Cloner Pro Helper, please make sure you are using Windows 7 or later versions and your PC is equipped with USB 2.0 or 3.0 port. 2. Register HDML-Cloner Pro Helper Please register HDML-Cloner Pro Helper first before using, otherwise it can only be used for 7 days. Launch HDML-Cloner Pro Helper. Click ”Input registration code” button in the auto pop-up Register window. Fill in your proper Email address, 2.1.
ClonerAlliance Flint D4P User Manual real name and code. Then click ”OK” to finish the registration. • Obtain the registration code of HDML-Cloner Pro Helper. Scan the QR code below to get the code directly. Or visit https://www.cloner-alliance.com/register, fill in your product S/N. You will get a registration code directly. It is advised that you input your correct email address to receive the registration code at the same time.
ClonerAlliance Flint D4P User Manual FHXXXXXXXX (a) Click.Here For more details about registering HDML-Cloner Pro Helper, visit here to read step by step instructions. 2.2 Install OBS Studio (Windows, Mac, and Linux Users) Open Broadcaster Software is a Free and open source software for video recording and live streaming. Download and start streaming quickly and easily on Windows, Mac or Linux. Please install Open Broadcaster Software (OBS Studio) and run it on your computer.
ClonerAlliance Flint D4P User Manual 2.2.
ClonerAlliance Flint D4P User Manual 3.2 OSD Structure 1. INPUT: Here shows the resolution of inputs which connected to D4P device 2. Overlay Position: It will show the overlay mode currently use 1. HD1 or HD2 as Display mode: 3.2.
ClonerAlliance Flint D4P User Manual 2. PIP as Display mode: 3.2.
ClonerAlliance Flint D4P User Manual 3. POP as Display mode: 3.2.
ClonerAlliance Flint D4P User Manual 4. PMP as Display mode: 3.2.
ClonerAlliance Flint D4P User Manual Output for The Display Mode: It shows which Audio and Video Source you’re choosing for displaying. It will update after you select Video and Audio channel on remote, please refresh the OSD menu by pressing button on remote. 3.2.
SWITCHING DISPLAY MODE ClonerAlliance Flint D4P device supports dual inputs, two signals can be displayed as picture in picture mode : HD1 Max: 4K@60hz Input, support 1080p@144Hz, 1080p@120Hz, 1080p@60hz etc. HD2 Max: 4K@30Hz Input, support 1080p@120Hz, 1080p@60hz etc.
ClonerAlliance Flint D4P User Manual 4.1 PIP Mode Press to enter PIP mode Press to switch overlay position: 4.1.
ClonerAlliance Flint D4P User Manual You can choose output audio by selecting on remote. The small screen can be displayed at four corners of the big to adjust the position: screen, you can press up/down/left/right arrows of 4.1.
ClonerAlliance Flint D4P User Manual And the size of the small screen also can be adjusted by pressing 4.1.
ClonerAlliance Flint D4P User Manual All the PIP information can be displayed on OSD menu: 4.1.
ClonerAlliance Flint D4P User Manual 4.2 POP Mode Press to enter POP mode You can swap up and down screens by pressing on remote, the two screens will change up side down: You can choose output audio by selecting on remote. 4.2.
ClonerAlliance Flint D4P User Manual All the POP information can be displayed on OSD menu: 4.2.
ClonerAlliance Flint D4P User Manual 4.3 PMP Mode Press to enter PMP mode You can swap left and right screens by pressing on remote, the two screens will exchange immediately: You can choose output audio by selecting on remote. 4.3.
ClonerAlliance Flint D4P User Manual All the PMP information can be displayed on OSD menu: 4.3.
ADJUST AND MIX AUDIO CHANNELS 1. LINE IN Line in socket is compatible with 3.5mm audio connector, such as audio mix device, mp3 players and cell phones. You can easily mix audio via “LINE IN”by using 3.5mm audio cable connected to audio devices. After connected audio device to “LINE IN”, it will directly mix audio to HDMI embedded audio. It also can be monitored from “LINE OUT”and output devices.
ClonerAlliance Flint D4P User Manual 2. MIC It is compatible with most 3.5mm audio standard MICs, you can mix your voice into source video.
ClonerAlliance Flint D4P User Manual 3. LINE OUT LINE OUT socket is compatible with 3.5mm audio connector, you can connect speakers, headphones and sound bars.
ClonerAlliance Flint D4P User Manual 4. EXT.AUDIO IN EXT.AUDIO IN is compatible with 3.5mm audio connector. It’s an optional port. You don’t have to use it. Please note that using the EXT.AUDIO IN will mute the audio of source HDMI embedded audio.
ClonerAlliance Flint D4P User Manual And if you select ”EXT.” as Main Audio on remote, you can see the ”Audio Source” shows ”DVI” in OSD menu: Note: Using the EXT.AUDIO IN will mute HDMI embedded audio automatically, no matter it’s connected to audio source or not. So please be careful about this operation.
RECORD/CAPTURE VIDEOS TO PC. 6.1 Connect 1. Connect the source video player to the “HD1”or “HD2”port on ClonerAlliance Flint D4P via an HDMI cable. 2. ClonerAlliance Flint D4P device supports up to 4K@60Hz/1080p@144Hz at HD1 Input and 4K@30Hz/1080p@120Hz at HD2 Input, the output will be 1080p@60fps automatically. 3. Connect the TV to the “OUT”port on ClonerAlliance Flint D4P via an HDMI cable. 4.
ClonerAlliance Flint D4P User Manual • For Windows After all devices are connected properly, when you power on all devices, go to “Device manager”, it will show “CA Flint D4P VIDEO”under “Cameras”and “CA FLINT D4P AUDIO”under “Sound, video and game controllers”. 6.1.
ClonerAlliance Flint D4P User Manual • For Linux Connect ClonerAlliance Flint D4P to PC via USB Type-C cable, go to the “Sound/Input”, it will show as “CA FLINT USB Device”in the list. 6.1.
ClonerAlliance Flint D4P User Manual • For Mac OS Connect ClonerAlliance Flint D4P to Mac, go to “System Preferences/Sound/Input”it shows “CA FLINT D4P Audio” 6.1.
ClonerAlliance Flint D4P User Manual in the list. 6.1.
ClonerAlliance Flint D4P User Manual 6.2 Record/Capture for Windows users Please download HDML-Cloner Pro Helper software and install it on your PC first. See details about Install and register HDML-Cloner Pro Helper (Windows Users) 1. After all devices are connected properly, insert the video disc into the drive of the video player and run HDML-Cloner Pro Helper. 6.2.
ClonerAlliance Flint D4P User Manual 2. Click to start recording. 6.2.
ClonerAlliance Flint D4P User Manual 6.2.
ClonerAlliance Flint D4P User Manual 3. Click at any sides, to stop time. you recording. When can Click you Tip: want to to During resume, take recording, please screenshots, click click you can to also continue to to click capture recording. GIF pause Be- animation. Software interfaces may vary depending on the version. 6.2.
ClonerAlliance Flint D4P User Manual 4. After recording, click to view the recorded video. Then you can click 6.2. Record/Capture for Windows users to play back the video directly.
ClonerAlliance Flint D4P User Manual HDML-Cloner Pro Helper also supports recording videos at the scheduled time. Click Then click the ”Schedule Recording” button. 6.2. Record/Capture for Windows users to enter the ”Setup” window.
ClonerAlliance Flint D4P User Manual Please enable schedule recording first, and set the Start time and duration for schedule recording. Then click “OK”. Then videos will be recorded automatically at the scheduled time. 6.2.
ClonerAlliance Flint D4P User Manual 6.3 Record/Capture for Mac OS users 1. After all devices are connected properly, insert the video disc into the drive of the video player and launch Quick Time Player. 2. Please confirm the setting of Camera/Microphone/Quality as below. 6.3.
ClonerAlliance Flint D4P User Manual 3. You can capture your game now. 6.4 Record/Capture for Linux users 1. After all devices are connected properly, insert the video disc into the drive of the video player and launch OBS Studio software. 6.4.
ClonerAlliance Flint D4P User Manual 2. In source column, click “+”to add video capture device: 6.4.
ClonerAlliance Flint D4P User Manual 3. It’s recommended that to use 60pfs frame rate while game recording/streaming, please set up as following: 6.4.
ClonerAlliance Flint D4P User Manual 4. In source column, click “+”to add audio capture device: 6.4.
ClonerAlliance Flint D4P User Manual 5. If you need to monitor the audio during preview/recording, please also modify the settings in advanced audio properties: 6.4.
ClonerAlliance Flint D4P User Manual 6. Now you can start recording and streaming. 6.4.
ClonerAlliance Flint D4P User Manual 6.4.
RECORD/CAPTURE GAME CONSOLE WITH PC. 7.1 Connect 1. Connect the game console to the “HD1”or “HD2”port on ClonerAlliance Flint D4P via an HDMI cable. 2. ClonerAlliance Flint D4P device supports up to 4K@60Hz/1080p@144Hz at HD1 Input and 4K@30Hz/1080p@120Hz at HD2 Input, the output will be 1080p@60fps automatically. 3. Connect the TV to the “OUT”port on ClonerAlliance Flint D4P via an HDMI cable. 4.
ClonerAlliance Flint D4P User Manual • For Windows After all devices are connected properly, when you power on all devices, go to “Device manager”, it will show “CA Flint D4P VIDEO”under “Cameras”and “CA FLINT D4P AUDIO”under “Sound, video and game controllers”. 7.1.
ClonerAlliance Flint D4P User Manual • For Linux Connect ClonerAlliance Flint D4P to PC via USB Type-C cable, go to the “Sound/Input”, it will show it as “CA FLINT USB Device”in the list. 7.1.
ClonerAlliance Flint D4P User Manual • For Mac OS Connect ClonerAlliance Flint D4P to Mac, go to“System Preferences/Sound/Input”it also shows“CA FLINT D4P Audio 7.1.
ClonerAlliance Flint D4P User Manual Device”among the list. 7.1.
ClonerAlliance Flint D4P User Manual 7.2 Record/capture game console videos to PC You can see details about record/capture game console videos at Record/capture videos to PC. 7.2.
PLAY GAME CONSOLE ON PC WITHOUT TV With ClonerAlliance Flint D4P, you can use your PC’s screen to play game console. No TV required. 8.
ClonerAlliance Flint D4P User Manual 8.2 Play game console for Windows users Function description: It’s annoying there is no immediate reaction or delay when you press gamepad buttons in an exciting video game. In order to help ClonerAlliance customers get the best gaming experience in HDML-Cloner Pro Helper, our developers add a new viewing mode as ”Playing game mode”.
ClonerAlliance Flint D4P User Manual Please connect game console to the HDMI port of ClonerAlliance Flint D4P with HDMI cable then power up the game console. Step 4: Launch HDML-Cloner Pro Helper software, it will recognize ClonerAlliance Flint D4P device automatically and show the game console’s screen after connected. Step 5: 8.2.
ClonerAlliance Flint D4P User Manual For the best gaming experience, it is recommended to click this mode, it will present ultra high flow and ultra low latency. to switch the viewing mode as ”Playing game mode”. In Note: • ClonerAlliance Flint D4P device supports 8.2.
ClonerAlliance Flint D4P User Manual 4K@30Hz/1080p@120Hz at HD2 Input, the output will be 1080p@60fps automatically. 8.3 Play game console for Mac OS users 1. After all devices are connected properly, insert the video disc into the drive of the video player and launch Quick Time Player. 2. Please confirm the setting of Camera/Microphone/Quality as below. 8.3.
ClonerAlliance Flint D4P User Manual 3. You can capture your game now. 8.4 Play game console for Linux users 1. After all devices are connected properly, insert the video disc into the drive of the video player and launch OBS Studio software. 8.4.
ClonerAlliance Flint D4P User Manual 2. In source column, click “+”to add video capture device: 8.4.
ClonerAlliance Flint D4P User Manual 3. It’s recommended that to use 60pfs frame rate while game recording/streaming, please set up as following: 8.4.
ClonerAlliance Flint D4P User Manual 4. In source column, click “+”to add audio capture device: 8.4.
ClonerAlliance Flint D4P User Manual 5. If you need to monitor the audio during preview/recording, please also modify the settings in advanced audio properties: 8.4.
ClonerAlliance Flint D4P User Manual 6. Now you can start recording and streaming. 8.4.
ClonerAlliance Flint D4P User Manual 8.4.
RECORD/CAPTURE VIDEOS TO MOBILE. • System Requirements Android version 7.0 or above 9.1 Connect 1. Connect the game console to the “HD1”or “HD2”port on ClonerAlliance Flint D4P via an HDMI cable. 2. ClonerAlliance Flint D4P device supports up to 4K@60Hz/1080p@144Hz at HD1 Input and 4K@30Hz/1080p@120Hz at HD2 Input, the output will be 1080p@60fps automatically. 3. Connect ClonerAlliance Flint D4P to Android phone with the USB2.0(female) to USB Micro-B OTG cable or USB type-A to type-C connector.
ClonerAlliance Flint D4P User Manual • For USB Type-C socket phone. Please use USB(female) to Type-C(male) connector to connect to your Android phone. • For USB Micro-B socket phone. Please use USB Type-C (male) to USB (male) cable and Micro-B OTG cable to connect your Android phone. 9.1.
ClonerAlliance Flint D4P User Manual 9.2 Record/Capture with ClonerAlliance App Step 1: Please connect source device properly. Step 2: Please install Cloner Alliance APP on your phone and launch it after finishing installation. It will display source video on your phone. 9.2.
ClonerAlliance Flint D4P User Manual Step 3: Set up resolution, bitrate and duration (short video capture) by tapping Settings 9.2.
ClonerAlliance Flint D4P User Manual lowing picture shows: Video Capture • Resolution: 1920*1080; 1280*720; 720*480 • Bitrate: 100KBps-10000KBps • Duration: 3min to infinity 9.2.
ClonerAlliance Flint D4P User Manual Step 4: Tap then to record video as configured in ”Preview and recorder” and tap stop automatically as duration configured). to stop recording (short video will Step 5: Tap to check all files have been saved. 9.2.
PREVIEW VIDEOS FOR LIVE STREAMING. You can use ClonerAlliance Flint D4P in OBS Studio to preview/record/livestream videos, which is a popular open source software for video recording and live streaming. 10.
ClonerAlliance Flint D4P User Manual 1. HD1/HD2: Connect an HDMI cable between the source video player and ClonerAlliance Flint D4P. 2. ClonerAlliance Flint D4P device supports up to 4K@60Hz/1080p@144Hz at HD1 Input and 4K@30Hz/1080p@120Hz at HD2 Input, the output will be 1080p@60fps automatically. 3. Connect the TV to the “OUTPUT”port on ClonerAlliance Flint D4P via an HDMI cable. 4. Connect the USB3.0(male) to USB Type-C cable between ClonerAlliance Flint D4P and PC. 5.
ClonerAlliance Flint D4P User Manual 10.3 Setting for preview video Step 1: Launch OBS Studio software on PC, Click “+”icon under “Sources”window, and select “Video Capture Device”: 10.3.
ClonerAlliance Flint D4P User Manual Step 2: Select “CA FLINT D4P VIDEO”in the drop box next to “Device”: 10.3.
ClonerAlliance Flint D4P User Manual Set Audio Output Mode, please select “Output desktop audio (DirectSound), Audio Device to “CA FLINT D4P AUDIO” 10.3.
ClonerAlliance Flint D4P User Manual Step 3: Please make sure the “Sample rate”in “Audio”settings is set to “48KHz”. 10.3.
ClonerAlliance Flint D4P User Manual Step 4: Then you can start recording or streaming video: 10.3.
ClonerAlliance Flint D4P User Manual Can I use multiple ClonerAlliance Flint D4P devices on one PC at the same time? Sure, both bundled software HDML-Cloner Pro Helper and OBS studio can support multiple ClonerAlliance Flint D4P devices working on one PC at the same time, you just need to add and select devices individually as following: 83
ClonerAlliance Flint D4P User Manual You can easily distinguish each device through video preview window.
ClonerAlliance Flint D4P User Manual And you can select an audio device for each video capture device based on the insertion order.
ClonerAlliance Flint D4P User Manual No, ClonerAlliance Flint D4P can be powered by USB port with PC. Can I Watch The Videos On My TV When I Use ClonerAlliance Flint D4P To Record The Videos? Yes. ClonerAlliance Flint D4P can pass-through HDMI video signal out to TV while recording video. You can enjoy watching video without interruption. What if my phone doesn’t have an USB micro-B socket? Don’t worry, there is a USB2.
ClonerAlliance Flint D4P User Manual At Set Audio Output Mode, please select “Output desktop audio (DirectSound), Audio Device to “Microphone(CA Flint D4P Audio )”, then click “OK”: How to deal with PC doesn’t recognize ClonerAlliance Flint D4P device? 87
ClonerAlliance Flint D4P User Manual Please change another USB port and re-plug in, it’ll help. Why are audio and video out of sync when I use OBS studio with ClonerAlliance Flint D4P? Please set up as following and it will perform normally. First, please set Flint D4P sample rate as 48KHz. And please make sure sample rate in OBS Studio is also set to 48KHz.
ClonerAlliance Flint D4P User Manual If your video and audio are still not synchronized, please adjust video delay value in “Source-filter-Video delay(Async)” around 470ms according to your circumstance.
ClonerAlliance Flint D4P User Manual 90
ClonerAlliance Flint D4P User Manual 91
ClonerAlliance Flint D4P User Manual 92
PRODUCT SPECIFICATIONS Input Output Recording Output format Video standard (input) Input signal Output signals Max transmission bitrate Bitrate Weight Dimensions HD1 Max: 4K60hz. Support: 4K60hz, 1080p144hz, 1080p120hz, 1080p60hz etc. HD2 Max: 4K30hz. Support: 4k30hz, 1080p120hz, 1080p60 etc. Up to 60 fps @ 1920x1080 Up to 60 fps @ 1920x1080 MJPEG,YUY2 NTSC, PAL HDMI, Line in, Mic, EXT.Audio HDMI (pass-through), USB Type-C, Line out 5Gbps Up to 140Mbps 7.8 oz 5.7 x 4.3 x 0.
AFTER SALES WARRANTY ClonerAlliance Inc. provides 60-Day No Hassle Return(No Additional Fee) and 2-Year Replacement Warranty Service for all hardware. Please rest assured to use ClonerAlliance products.
CONTACT US If you encounter any problem when using our products, please contact us by support@cloner-alliance.com or call 1-844-9-CLONER (toll free) and we will serve you with utmost satisfaction. We’ll offer a satisfying discount on batch purchase and affiliate program. If you are interested, please contact us by market@cloner-alliance.com.
DISCLAIMER HDMI is a registered trademark of HDMI Licensing, LLC. USB is a registered trademark of USB Implementers Forum. HDMI and USB are registered trademarks of their respective companies. ClonerAlliance Inc. is not affiliated with those companies.
Toll free: 1-844-9-CLONER Support Email: support@cloner-alliance.com Market Email: market@cloner-alliance.com www.cloner-alliance.com Copyright ClonerAlliance Inc. All rights reserved.