C-Bus Single Zone Thermostat User’s Guide 5070THB Series
© Copyright Clipsal Australia Pty Ltd 2007. All rights reserved. This material is copyright under Australian and international laws. Except as permitted under the relevant law, no part of this work may be reproduced by any process without prior written permission of and acknowledgement to Clipsal Australia Pty Ltd. Clipsal and C-Bus are registered trademarks of Clipsal Australia Pty Ltd. The information in this manual is provided in good faith.
Contents 1.0 Description and Features 1.1 2.0 Temperature Guard Operating the Unit 5 5 6 2.1 Button Identification 7 2.2 Switching On 7 2.3 Adjusting the Temperature 8 2.4 Adjusting the Operating Type 8 2.5 Setup 9 2.6 Timer 10 2.7 Setback 10 3.0 Factory Default Settings 11 4.0 Electrical Specifications 11 5.0 Standards Complied 12 6.
C-Bus Single Zone Thermostat 4
User’s Guide 1.0 Description and Features The 5070THB Series C-Bus Single Zone Thermostat is used to regulate the air temperature of a particular environment. The unit may be controlled via other C-Bus devices such as wall switches or a Touch Screen, and it may operate independently. The air temperature is monitored by the unit’s inbuilt temperature sensor or optionally via an external C-Bus temperature sensor. The unit includes the following special features: • • Setback.
C-Bus Single Zone Thermostat 2.
User’s Guide 2.1 Button Identification A heating, ventilation or air conditioning (HVAC) system connected to the C-Bus Single Zone Thermostat is controlled by the buttons on the front panel (Figure 1). Each button is capable of more than one function. Timer and Setback are accessed by holding the respective Fan or Type button down for 2 seconds. Setup is accessed by pressing the Down and Up buttons simultaneously for 2 seconds. Refer to Table 1.
C-Bus Single Zone Thermostat 2.3 Adjusting the Temperature Use the Down and Up buttons to adjust the air temperature (set point). On evaporative cooling systems this is a comfort level (such as a number from 1 to 20). On other systems this is a temperature (such as 22 °C). 2.4 Adjusting the Operating Type The cooling, heating and fan symbols indicate which type is currently selected. If necessary, press the Type button and use the Down or Up button to change the type.
User’s Guide 2.5 Setup Setup allows you to change the temperature display format and fan configuration. Setup is accessed when the unit is on or off, by pressing the Down and Up buttons simultaneously for 2 seconds. Temperature Display Format To change the temperature display format: 1) Enter setup (press the Down and Up buttons for 2 seconds). 2) Press the Down or Up button to alternate between °C and °F. 3) Press the Power button to exit setup mode.
C-Bus Single Zone Thermostat 2.6 Timer The 5070THB Series C-Bus Single Zone Thermostat includes a timer which is used to switch the HVAC system on or off after a specified time period. The time period is specified in 0.5 hour increments, from 0.0 (no timer) to 23.5 hours. Setting the timer when the unit is on will switch the unit and HVAC system off when the timer expires. Setting the timer when the unit is off will switch the unit and HVAC system on when the timer expires.
User’s Guide 3.0 Factory Default Settings Parameter Setting Manual set temperature 22 °C (72 °F) HVAC type Heating & cooling Operating state Off Setback value +/–5 °C (9 °F) Fan configuration AUTO Temperature display format °C 4.
C-Bus Single Zone Thermostat 5.
User’s Guide Other International Standards Model 5070THB and 5070THBR products comply with the following: Standard IEC 60669-2-1 Title Switches for household and similar fixed electrical installations – Part 2: Particular requirements – section 1: Electronic switches CISPR 14-1 Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emissions CISPR 15 Limits and methods of measurement of radio disturbance characteristics of electrical lighti
C-Bus Single Zone Thermostat 6.0 Warranty 5070THB Series C-Bus Single Zone Thermostats carry a two year warranty against manufacturing defects. Warranty Statement 1) The benefits conferred herein are in addition to, and in no way shall be deemed to derogate; either expressly or by implication, any or all other rights and remedies in respect to Clipsal Integrated Systems Product, which the consumer has under the Commonwealth Trade Practices Act or any other similar State or Territory Laws.
Technical Support and Troubleshooting For further assistance in using this product, consult your nearest Clipsal Integrated Systems (CIS) Sales Representative or Technical Support Officer. Technical Support Contact Numbers Australia 1300 722 247 (CIS Technical Support Hotline) New Zealand 0800 888 219 (CIS Technical Support Hotline) Northern Asia 852 2484 4157 (Clipsal Hong Kong) South Africa (011) 314 5200 (C-Bus Technical Support) Southern Asia 603 7665 3555 Ext.
