Bluetooth Hands-Free Car Kit HCC-100 User Manual
[Table of Contents] Before use Package contents Description of parts Recommended installation position Charging Low battery Battery status Solar power charging status How to use Power on/off Pairing Connecting Answering a call Making a call Ending a call Volume control Functions during a call Summary of button functions LED indication and signal sound Supplement Troubleshooting Cautions Additional information Standards and specifications Limited warranty 2 3 4 4 6 6 6 7 7 9 10 10 11 11 12 13 14 15 16
Before use The Clipcomm HCC-100 is a solar-powered Bluetooth handsfree car kit with a slim and fashionable design. It provides crystal clear sound and excellent ease of use because of its simple and user-friendly interface. [Package contents] Ensure that the items mentioned below are all included in the package. If any item is missing, please contact the dealer.
Before use [Description of parts] Microphone Status LED Multifunction button Volume controls / Speaker Battery status LED Charging port 3M tape Suction cup hole Solar panel Suction cup hole 3M tape 3
Before use [Recommended installation position] It is recommended that the hands-free car kit be positioned and installed on the top-left of the windshield, as shown in the picture below. (The hands-free car kit can be installed using either 3M tapes or suction cups.) Installing the hands-free car kit in the recommended position will lead to more efficient solar power charging and better performance with regard to the microphone. Ensure that the hands-free car kit does not obstruct the driver’s view.
Before use Charge your hands-free car kit until the battery status LED turns off. The unit will be fully charged in approximately 2 h. 2. Using solar power Direct the solar panel on the back of the hands-free car kit toward the sun. (Please refer to the recommended installation position, as mentioned above.) If the car kit receives sufficient sunlight for 3 h, you can talk for a duration of up to 30 min.
Before use [Low battery] The status LED will flash blue and the battery status LED will flash red simultaneously with a periodic beeping sound when the battery status is lower than 10% out of full charge. In this low battery status, the battery status LED and the status LED will operate simultaneously in the same way. Charge the battery as soon as the abovementioned phenomenon is detected. The product will turn off when the battery is not charged.
How to use Press for 5 s again to turn off the battery status LED. It is recommended to turn off the battery status LED during the solar power charging. By doing this, the battery will be charged much faster and more sufficiently. [Power on] 1. Press and hold for 2 s. 2. You will hear a booting tone and the status LED will briefly flash blue rapidly for 5 times. [Power off] 1. Press and hold for 5 s. 2. You will hear a shutdown tone and the status LED will briefly flash blue rapidly for 5 times.
How to use 2. You will hear two short beeps after the booting tone, and the status LED will glow blue steadily. 3. Go to the Bluetooth menu in your mobile phone and search for the hands-free option. You might need to search for options such as headset, audio device, etc. in case your mobile phone does not contain the hands-free option; these options, however, are subject to the model of the mobile phone being used.
How to use [Connecting] To use hands-free car kit after pairing (or after losing the connection), you should connect it to the paired mobile phone. For more details regarding the connection method, please refer to the manual of your Bluetooth mobile phone. Auto reconnection 1. When the hands-free car kit turns off while connecting The hands-free car kit will be automatically reconnected without the paring process when the hands-free car kit turns on.
How to use [Answering a call] The hands-free car kit and mobile phone will ring simultaneously when an incoming call is received. You can answer a call by pressing briefly. (The call can also be answered using the mobile phone.) Ringing mute In order to activate the mute function when an incoming call is received, press and hold for 1 s; this will mute the ringing sound. (This function may be used to maintain silence inside the car.) To release the mute function, press and hold for 1 s again.