Order Number : GETEC-C1-12-289 FCC Part 15 subpart C Test Report Number : GETEC-E3-12-100 Page 1 / 1 APPENDIX H : USER’S MANUAL EUT Type: Bluetooth Analog Telephone adapter FCC ID.
Instructions for use 0000122272000001 installation guide
Thank you Indication for use Thank you for choosing our product as your means to better hearing. The Phone adapter is intended to be used together with the Oticon Streamer and Oticon wireless hearing instruments. To support your efforts, we have put great care and attention into making sure that your new Phone adapter has the highest quality and is easy to use and maintain.
Contents Package content Phone adapter overview Warnings Installation Connecting the Phone adapter to a power outlet Connecting to phone line and landline phone Pairing the Streamer to the Phone adapter Technical information Important Notice Please familiarise yourself with the entire contents of this booklet before using your Phone adapter. It contains instructions and important information about the use and handling of your Phone adapter.
Package content Phone adaptor 2.
Phone adapter overview Back Front Power indicator Phone indicator POWER AUX IN OUT Power supply Condition Power indicator Power On, no connection to the Streamer Phone indicator To PSTN wall plug ConnectLine in/out* Pairing with the Streamer To landline phone The Streamer is wirelessly connected Incoming call Phone conversation Fault condition No light Blinking Steady * For more information please refer to: www.oticon.
Warnings Warnings You should familiarize yourself fully with the following general warnings and the entire contents of this booklet before using your Phone adapter. Products to be connected to external equipment • The safety of the use of the Phone adapter with auxiliary input cable is determined by external signal source. When the input cable is connected to mains-operated equipment, this equipment must comply with IEC-60065, IEC-60601, IEC-60950 or equivalent safety standards.
Installation Activating the Phone adapter for the first time Before you can use the landline phone solution together with your hearing instruments, the Phone adapter must be connected to a power outlet and the public telephone line. This is a step-by-step guide on how to install the Phone adapter. All needed parts for the installation are included in the package.
Connecting the Phone adapter to a power outlet Use the power supply with USB cable from box no. 1 Box 1 1 2 1. Plug the USB connector into the “power” connector on Phone adapter 2. Plug the power supply into the mains wall socket or another power source 4. 3. Check that power is turned on will light green 4. After a few seconds the power indicator 2. 1.
Connecting to phone line and landline phone 1 Box 2 2 Place the Phone adapter unit in a suitable spot near your landline phone or base station. 1. Unplug the phone line from the landline phone (or base station).* 1. 2. Plug the phone line from the wall adapter into the Phone adapter “IN” connector. 4. 3. Plug the tele cord from box 2 in the Phone adapter “OUT” connector. 4. Plug the other end of the tele cord into the landline phone (or base station).
Pairing the Streamer to the Phone adapter The very first time your Streamer is used with the Phone adapter, the Streamer must be paired to the Phone adapter. For pairing: 1. Make sure the Phone adapter is powered on, i.e. the power indicator is steady green. 2. 4. 2. Press the Streamer connect button (Streamer) or on/off button (Streamer Pro) for 5-6 seconds until the blue light starts blinking. 3. Place the Streamer on top of the Phone adapter – the pairing takes around 20–60 seconds. 2. 4.
Pairing Streamer Pro top status Streamer Pro front Phone adapter Description Streamer and Phone adapter on (1) Streamer in pairing mode (2) Pairing complete (4) Steady Steady Blinking 20
Technical information The emission power from the Phone adapter is well below international emission limits for Human Exposure. The Phone adapter complies with international standards concerning Electromagnetic Compatibility. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This instrument contains a module with: FCC ID: U (nye numre indsættes) IC: 1350B-BSH200 The device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC statement This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions: 1) this device may not cause interference. 2) this device must accept any interference, including interference that may cause undesired operation of the device. IC radiation exposure statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.