Parts List

ManualsBrandsClimax Technology ManualsCamera & PhotoOutdoor PIR Motion Sensor Camera

Outdoor PIR Motion Sensor Camera 862EX

862EX is an outdoor passive infrared (PIR) motion sensor camera. It is capable of sending wireless signals and captured images

(picture quality of up to 640 x 480 pixels) to the Control Panel upon movement detection.

Featuring night illumination capability, with UV resistant housing, and waterproof to IP45 standard, 862EX is ideal for backyards,

lawns, gates, outdoor corridors and hallways.

The outdoor PIR Camera is designed to give a typical detection range of 10 meters when mounted at 2 meters above ground. It

provides pet-immunity up to 60 kilos with two selectable sensitivity levels to accommodate different environments.

862EX Series is compatible with repeaters/routers, the RF communication range can be further extended into hard-to-reach

areas. For the model designed with the digital proximity detector, the anti-masking feature allows for detection of any attempts to

blind the detector by placing objects in its field of view.

The 862EX Series includes the following models:

862EX – PIR motion sensor camera with flash LED

862EX-AM – PIR motion sensor camera with flash LED and the digital proximity detector.

862EX-IL – PIR motion sensor camera with Infrared LED

 Identifying the Parts

Front View Inside View

1. Digital Proximity Detector

The digital proximity detector (For 862EX-AM) is used to detect any masking (blocking) attempt by an intruder.

2. Flash LED / Infrared LED

The Flash LED (For 862EX & 862EX-AM) or Infrared LED (For 862EX-IL) delivers sufficient light for image capture under low

lighting condition.

3. LED Indicator (Red)

The LED indicator is used to indicate the system status.

4. IR Sensor

The sensor is intended to detect moving objects.

5. PIR Camera Lens

6. Test&Learn Button

-Press and hold the button for 3 seconds to send a learn code, and then release the button when Red LED lights up.

-Press the button once to enter test mode for 10 minutes.

-Press the button once to send a learn code to the repeater/router. (P5 models only)

7. Internal Tamper

Summary of content (9 pages)

PAGE 1
Outdoor PIR Motion Sensor Camera 862EX 862EX is an outdoor passive infrared (PIR) motion sensor camera. It is capable of sending wireless signals and captured images (picture quality of up to 640 x 480 pixels) to the Control Panel upon movement detection. Featuring night illumination capability, with UV resistant housing, and waterproof to IP45 standard, 862EX is ideal for backyards, lawns, gates, outdoor corridors and hallways.
PAGE 2
8. DIP Switch Block There are 8 DIP Switches for setting the function & detection sensitivity levels. 9. Battery Compartment 10. Mounting Bracket  LED Indicator When enabled, the LED Indicator will light up in the following conditions:  When the Tamper Switch is triggered, the LED will flash for 6 times to indicate it is transmitting “Tamper” signal.
PAGE 3
DIP Switch1 Switch2 Switch3 Position ON OFF Function Test Mode Normal Mode (default) ON LED Indicator Enable (default) OFF ON LED Indicator Disable PIR Camera facing a wall PIR Camera facing an open space (no wall within 10 m) (default) PIR Camera facing a lawn (default) OFF ON Switch4 OFF DIP Sensitivity Level Switch5 ON ON OFF Switch6 ON OFF ON OFF OFF DIP Position ON OFF ON OFF Switch7 Switch8 ON Low; 75 cm/60 kg pet (default) High; 50 cm / 35 kg pet Reserved Reserved OFF Function Do
PAGE 4
   Walk Test should be conducted to confirm proper operation and coverage of the PIR. When learning the PIR Camera into a repeater/router, please press the Test button once (instead of pressing and holding it for 3 seconds) to send a learn code. (P5 models only) Edit PIR Camera Operation Area Follow instruction below to change PIR Camera Area in the Control Panel 1) Use the panel Edit Device function to change PIR Camera area setting.
PAGE 5
862EX. With the rotating holder, the PIR Camera can be rotated horizontally to provide optimal coverage. A special screwdriver with reversible double-sided bit, and three star socket screws are provided for fixing the rotating holder to the wall. Please use the provided screwdriver to tighten/loosen star socket screws.  To mount 862EX with mounting bracket and rotating holder: 1) Fix the rotating holder to the wall with provided screws.
PAGE 6
2) Fix the mounting bracket on the swivel ball with the fixing screw secured through the foolproof design hole. 3) Mount 862EX with the hooks of the mounting bracket latched on the back cover of the 862EX, and then push downwards until you hear a click sound. 4) Rotate the swivel ball horizontally to adjust 862EX’s detecting angle. (When the angle adjusting screw is half loosen, the swivel ball can still be rotated.
PAGE 7
Limitations:      Do not install the PIR Camera completely exposed to direct sunlight. Avoid large obstacles in the detection area. Do not point directly at sources of heat, such as fires and boilers, or install above radiators. Never attempt to disassemble or modify the unit. Please install the PIR Camera straight up. Do not tilt it.  Do not install the motion sensor camera where objects moved by wind such as trees and laundry, which may block the motion sensor camera’s field of view.
PAGE 8
 Adjust the Dip Switches according to the installation location of the PIR Camera for ideal performance. If Dip Switch settings does not match with installation environment, the PIR Camera’s performance will be hindered and may cause either false alarm or inability to detect movement.  The PIR Camera detects differences between the moving object and the background. If the object is idle (i.e. not moving), the PIR Camera is unable to detect it.
PAGE 9
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.