Modules & Options Pre-Allocating File Space You may pre-allocate the file size for the capture file in the Video View program. 7 Pre-allocating space on the hard disk can improve the capture quality (particularly of large capture files), by reducing the amount of work the hard disk has to do in finding space for the video data as it is being captured. Video View (for 2.
Modules & Options Eliminating Screen Flicker (Video View) If you find that the video screen in the Video View program is flickering, you can try to adjust the setting in the Video Capture Filter options. 1. 2. 3. Run the Video View program. Go to Options and scroll down to select Video Capture Filter.... Click either 50Hz or 60Hz under Flickering Reduction in Image (tab).
Modules & Options Zoom (Video View) If you have enabled digital zoom when installing the 2.0M Pixel Camera driver you may use the Options > Setting menu to zoom the camera in and out. Figure 7 - 4 Setting 1. 2. 3. Run the Video View program. Go to Options and scroll down to select Setting. Use the slider to adjust the zoom level, and click OK to save the setting. Snapshot Folder 7 The Snapshot folder’s default location is on the desktop.
Modules & Options 802.11 b/g USB WLAN Module If you have included an 802.11b/g USB Wireless LAN module in your purchase option, you will have the appropriate software provided for your module. Before installing the 802.11b/g USB WLAN driver, make sure that the Wireless LAN module is on. Use the Fn + F11 key combination (see “Function Keys” on page 1 - 10) to toggle power to the Wireless LAN module. Make sure you install the drivers in the order indicated in Table 4 - 1, on page 4 - 3. 802.
Modules & Options Connecting to a Wireless Network Make sure the Wireless LAN module is turned on. 1. Click the taskbar wireless icon , and then click Connect to a network (or rightclick the icon , and then click Connect to a network). Figure 7 - 6 Taskbar Menus Click icon Right-click icon 7 Network and Sharing Center 2. 3. In the Show list, click to choose Wireless from the drop-down menu. A list of currently available networks will appear.
Modules & Options 4. 5. Click a network, and then click Connect. If you do not see a network you want to connect to, click Set up a connection or network (a list of options will appear allowing manual searching, and creating a new network). Figure 7 - 8 Connecting 7 6. Move the cursor over the taskbar icon to see the connection status (see below). Figure 7 - 9 Connection Status 802.
Modules & Options 7. Security Enabled Networks You should try to make sure that any network you are connecting to is a secure network. 7 To disconnect from the wireless network you can click the taskbar wireless icon , and then select Connect or disconnect to access the network menu, and click Disconnect (or right-click the icon , and then click Disconnect from). Click icon Connecting to unsecure networks may allow unauthorized access to your computer, documents, websites and files etc.
Modules & Options Windows Mobility Center The Windows Mobility Center control panel provides an easy point of access for information on battery status, power plans used and wireless device status etc. To access the Windows Mobility Center: 1. 2. 3. Click Start, and click Control Panel (or point to Settings and click Control Panel). Double-click Windows Mobility Center (Mobile PC). Click the button to Turn wireless off/on, or click the icon to access the network menu.
Modules & Options Wireless Device Operation Aboard Aircraft The use of any portable electronic transmission devices aboard aircraft is usually prohibited. Make sure the module(s) are OFF if you are using the computer aboard aircraft. 7 Use the Fn + F12 key combination to toggle power to the Bluetooth module, and check the indicator to see if the module is powered on or not (see Table 1 - 5, on page 1 - 10/ Table 1 - 3, on page 1 - 7).
Modules & Options User Guides & Help View the BlueSoleil User Guides from the Help Menu (or press the F1 key) in the IVT Corporation BlueSoleil Main Window control panel. Click the Help menu and select Contents and Index. Look through Getting Started or select the appropriate User Guide from the Contents menu.
Modules & Options Disconnecting In order to have the Local Area Connection icon display the correct connection status, you will need to exit the IVT Corporation BlueSoleil - Main Window by clicking the File menu and selecting Exit (see over). 7 Bluetooth Local Area Connection You can check the Bluetooth connection status from the Network and Sharing Center: 1. 2. 3. 4. 5. 6. Use the Fn + F12 key combination to turn on the Bluetooth module.
Modules & Options 8. 9. Do not use the close button or Fn + F12 key combination before clicking File > Exit or the correct status will not be displayed. You can then use the Fn + F12 key combination to turn off the Bluetooth module (check the LED icon for the Bluetooth module power status).
Modules & Options Power Safety Warning 7 Before you undertake any installation procedures, make sure that you have turned off the power, and disconnected all peripherals and cables (including telephone lines). It is advisable to also remove your battery in order to prevent accidentally turning the machine on. 3.5G Module If you have included an optional 3.
Modules & Options 5. 6. Insert the SIM card as you would into your mobile phone. The 3.5G module 5 is pictured on the left, and the installed SIM card 6 on the right in Figure 7 - 16. Figure 7 - 16 Module and SIM Card Location 6 5 7. 7 Slide the SIMLOCK in the direction of the arrow 7 (Figure 7 - 17) in order to release the lock and lift it up. Figure 7 - 17 SIMLOCK Unlock 7 3.
Modules & Options 8. Insert the SIM card as illustrated in (Figure 7 - 18) and close the SIMLOCK. 9. Close the SIMLOCK by pushing it in the direction of the arrow in Figure 7 - 19. Figure 7 - 18 Insert the SIM Card 7 Figure 7 - 19 SIMLOCK Lock 10. Replace the hard disk assembly, cover, screws and battery etc. 7 - 22 3.
Modules & Options 3G Watcher Application With the 3.5G module and SIM card (provided by your service provider) installed you may then install the 3G Watcher application. The 3.5G Watcher application allows you to directly access your 3.5G internet service from the computer. 3G Watcher Application Installation 1. Make sure the module is powered on, and then insert the Device Drivers & Utilities + User’s Manual CD-ROM into the CD/DVD drive. 2. Click Optional (button). 3. Click 4.3GWatcher > Yes. 4.
Modules & Options Connecting to the Service Provider 1. 3G Watcher Online Help 2. For further details on the 3G Watcher application you can access the Online Help from the Help > Help Topics menu. 7 3. Power on the 3.5G module using the Fn + _( ) key combination (the icon will be green). You can access the 3G Watcher application from the Start menu (Start > Programs/All Programs > Sierra Wireless > 3G Watcher), or by clicking the desktop icon .
Modules & Options 6. When the connection is successful a taskbar notification will appear (as below). Figure 7 - 22 Connected Taskbar Notification 7. 8. 9. You can then access the internet, download e-mail etc. as per any internet connection. While you are connected the taskbar icon will be green (it will be red when the program is running but not connected). To disconnect click the Disconnect icon. 7 Figure 7 - 23 3GWatcher Connected 10. The program will disconnect from the service provider. 11.
Modules & Options 12. If you click the 3G Watcher close icon to click OK to confirm the program exit. a message will be displayed asking you Figure 7 - 24 Exit Warning 13. Exiting the program DOES NOT turn off the 3.5G module, and you will need to press the Fn + _( ) key combination to turn off the module (pay careful attention to this aboard aircraft - see “Wireless Device Operation Aboard Aircraft” on page 7 - 23). 14.
Modules & Options Short Messaging Service In addition to standard internet services you may also send and receive SMS text messages using the 3G Watcher program. Reading SMS Messages 1. 2. 3. 4. The SMS message indicator in the main window will notify you of any new messages received. Double-click the icon or select Tools > SMS Express. Select the inbox folder and select any message to read it.
Modules & Options 7 Fingerprint Reader Module Help & Manual If you have included the fingerprint reader in your purchase option you will need to install the driver as per the instructions below. Right-click the taskbar icon to bring up the menu to select Help. Make sure you have administrator’s rights to your computer, and have a Windows password enabled for full security protection. Insert the Device Drivers & Utilities + User’s Manual CD-ROM and click Optional (button).
Modules & Options User Enrollment 1. 2. 3. Click Start > Programs/All Programs > Protector Suite QL > User Enrollment, or double click the taskbar icon . On the first run of the program you will be asked to click the button to accept the license, and then click OK. Click Next and select “Enrollment to the hard disk”, and click Finish. Figure 7 - 25 Enroll to Hard Disk 4. 5. 6. 7. 8.
Modules & Options 9. Fingerprint Enrollment Note that it is strongly recommended that you enroll more than one finger in case of injury etc. 10. 11. 12. 13. 14. Click the button above any of the fingers to begin the enrollment process for that finger. Swipe the finger three times to enroll that finger. Repeat the process for all the fingers you wish to enroll (see sidebar), and then click Next. Click Finish. Click any of the headings under “Learn more about:” to get more information on any topic.
Modules & Options the Control Center etc. from the Protector Suite QL item in the Programs/All Programs menu. Figure 7 - 27 Control Center & Biomenu 7 17. See “Help & Manual” on page 7 - 28 for further details. 18. If you swipe your finger over the reader at any time you can access the Biomenu to lock the computer, register websites, open the Control Center and access the Help menu. 19. The Control Center allows you to change the Settings, enroll Fingerprints and get Help.
Troubleshooting Chapter 8: Troubleshooting Overview Should you have any problems with your computer, before consulting your service representative, you may want to try to solve the problem yourself. This chapter lists some common problems and their possible solutions. This can’t anticipate every problem, but you should check here before you panic. If you don’t find the answer in these pages, make sure you have followed the instructions carefully and observed the safety precautions in the preface.
Troubleshooting Basic Hints and Tips Many of the following may seem obvious but they are often the solution to a problem when your computer appears not to be working. • Power - Is the computer actually plugged into a working electrical outlet? If plugged into a power strip, make sure it is actually working. Check the LED Power & Communication Indicators (see “LED Indicators” on page 1 - 7) to see the computer’s power status.
Troubleshooting Backup and General Maintenance • Always backup your important data, and keep copies of your OS and programs safe, but close to hand. Don’t forget to note the serial numbers if you are storing them out of their original cases, e.g. in a CD wallet. • Run maintenance programs on your hard disk and OS as often as you can. You may schedule these programs to run at times when you are not using your computer.
Troubleshooting Viruses • Install an Anti-Virus program and keep the definitions file (the file which tells your program which viruses to look for) up to date. New computer viruses are discovered daily, and some of them may seriously harm your computer and cause you to lose data. Anti-Virus programs are commercially available and the definitions file updates are usually downloadable directly from the internet. • Be careful when opening e-mail from sources you don’t know.
Troubleshooting Upgrading and Adding New Hardware/Software • Do not be tempted to make changes to your Windows Registry unless you are very sure of what you are doing, otherwise you will risk severely damaging your system. • Don’t open your computer or undertake any repair or upgrade work if you are not comfortable with what you are doing. • Read the documentation.
Troubleshooting • Thoroughly check any recent changes you made to your system as these changes may affect one or more system components, or software programs. If possible, go back and undo the change you just made and see if the problem still occurs. • Don’t over complicate things.
Troubleshooting Problems and Possible Solutions Problem Possible Cause - Solution You turned on the power but it doesn’t work. Battery missing / incorrectly installed. Check the battery bay, make sure the battery is present and seated properly (the design of the battery only allows it to go in one way). Make sure there’s nothing interfering with the battery contacts. The battery LED power indicator , is blinking orange. Low Battery. Plug in the DC power source.
Troubleshooting Problem Possible Cause - Solution The computer feels too hot. Make sure the computer is properly ventilated and the Vent/Fan intakes are not blocked. If this doesn’t cool it down, put the system into Hibernate mode or turn it off for an hour. Make sure the computer isn’t sitting on a thermal surface (see “Overheating” on page 1 - 14). Make sure you’re using the correct adapter.
Troubleshooting Problem You forget password. the Possible Cause - Solution boot If you forget the password, you may have to discharge the battery of the CMOS. Contact your service representative for help. Password Warning If you choose to set a boot password, NEVER forget your password. The consequences of this could be serious. If you cannot remember your boot password you must contact your vendor and you may lose all of the information on your hard disk.
Troubleshooting Problem Unwelcome numbers appear when typing. Possible Cause - Solution If the LED is lit, then Num Lock is turned ON. (see “LED Indicators” on page 1 - 7). Other Keyboards If your keyboard is damaged or you just want to make a change, you can use any standard USB keyboard. The system will detect and enable it automatically. However special functions/hot keys unique to the system’s regular keyboard may not work. 8 The system freezes or the screen goes dark.
Troubleshooting Problem Possible Cause - Solution The PC Camera module cannot be detected. The module is off. Press the Fn + F10 key combination in order to enable the module (see “Function Keys” on page 1 - 10). Run the BisonCap program (see “BisonCap (for 1.3M or 300K pixel camera modules)” on page 7 - 6/“BisonCap (for 300K & 1.2M pixel camera modules)” on page D - 32) to view the camera picture. The Wireless LAN/ Bluetooth/ PC Camera/ 3.5G modules cannot be configured.
Troubleshooting 8 8 - 12
Interface (Ports & Jacks) Appendix A: Interface (Ports & Jacks) Overview The following chapter will give a quick description of the interface (ports & jacks) which allow your computer to communicate with external devices, connect to the internet etc.
Interface (Ports & Jacks) Notebook Ports and Jacks Item Description Card Reader Port The card reader allows you to use some of the latest digital storage cards. Push the card into the slot and it will appear as a removable device. DC-In Jack Plug the supplied AC/DC adapter into this jack to power your computer. External Monitor (VGA) Port This port allows you to connect an external monitor, or Flat Panel Display, to get dual video or simultaneous display on the LCD and external monitor/FPD.
Interface (Ports & Jacks) Item RJ-45 LAN Jack Description This port supports LAN (Network) functions. Note: Broadband (e.g. ADSL) modems usually connect to the LAN port. Security Lock Slot To prevent possible theft, a Kensington-type lock can be attached to this slot. Locks can be purchased at any computer store. S/PDIF-Out Jack This S/PDIF (Sony/Philips Digital Interface Format) Out Jack allows you to connect your DVDcapable PC to a Dolby AC-3 compatible receiver for “5.1” or ‘dts’ surround sound.
Interface (Ports & Jacks) A A - 4
Appendix B: SIS Video Driver Controls The basic settings for configuring the LCD are outlined in “Video Features” on page 1 - 16. SIS Video Driver Installation Function Key Combination Make sure you install the drivers in the order indicated in Table 4 - 1, on page 4 - 6. Insert the Device Drivers & Utilities + User’s Manual CD-ROM and click Install Drivers (button). Video 1. Click 1.Install VGA Driver > Yes. 2. Click Yes (click Yes if you want to view the ReadMe file). 3.
Taskbar Icon The SIS VGA Control Center can also be accessed by clicking the icon in the taskbar and selecting Control Center from the menu. SIS VGA Control Center More advanced video configuration options are provided by the SIS VGA Control Center. 1. Open the control panel (see “Windows Vista Start Menu & Control Panel” on page 1 - 15) and click SIS VGA Control Center (button).
You may make changes to the video and display settings by clicking the appropriate menu button.
Display Devices & Options Besides the built-in LCD, you can also use an external VGA monitor (CRT) or external Flat Panel Display as your display device. A VGA monitor/Flat Panel Display connects to the external monitor port. The following display modes are available.
Attaching Other Displays Besides the built-in LCD, you can also use an external monitor (CRT)/flat panel display as your display device. Connect it to the external monitor port on the left of the computer, and follow the instructions below: Windows Vista 1. 2. 3. Attach your external display to the external monitor port and turn it on.
External displays may also be configured from SiS VGA Control Center: 1. 2. 3. 4. 5. 6. Attach your external display to the external monitor port and turn it on. Click Start, and click Control Panel (or point to Settings and click Control Panel). Click SiS VGA Control Center (or click Appearance and Personalization > SiS VGA Control Center). Click Display Setting icon . Click Device List . Select which active device is to be Device 1/Device 2 and click OK. 7.
To Enable a Display Setting Mode 1. 2. 3. 4. Attach your external display to the external monitor port and turn it on. Go to the SIS VGA Control Center. Click the appropriate icon for the display setting mode you wish to use. Click Yes with 15 seconds in order to save the setting change. Figure B - 6 Confirm Changes 5. 6. You can adjust the display mode, change the status and clone Device 1 from the device list menu. Click Apply > Yes to save any changes.
Using Windows Vista to Enable Extended Mode Display Settings Extended Desktop Use the control panel to drag the monitors to match the physical arrangement you wish to use. 1. 2. 3. 4. 5. Attach your external display to the external monitor port, and turn it on. If a New Display Detected window does not appear in Windows Vista, go to the Windows Mobility Center control panel (Mobile PC > Adjust commonly used mobility settings) and click Connect display.
Using Display Settings to Enable Extended Mode 1. 2. 3. Attach your external display to the external monitor port, and turn it on. Open the Display Settings control panel (see “Video Features” on page 1 - 16). Click the monitor icon (e.g. 2 ), and make sure you have checked “Extend my Windows desktop onto this monitor.” and click Apply. Click the appropriate monitor icon (e.g. 2 ) to be able to select the option to extend the desktop on to it.
B B - 10
Specifications Appendix C: Specifications Latest Specification Information The specifications listed in this Appendix are correct at the time of going to press. Certain items (particularly processor types/ speeds and CD/DVD device types) may be changed, delayed or updated due to the manufacturer's release schedule. Check with your service center for details.
Specifications Feature C Specification Core Logic SiS M671 + SiS968 Chipset LCD 12.1" WXGA (1280 * 800) Glare / Non Glare TFT LCD Memory Two 200 Pin SO-DIMM Sockets Supporting DDRII (DDR2) 533/667 MHz 64-bit Wide DDRII (DDR2) Data Per Channel Memory Expandable up to 4GB (256/ 512/ 1024/ 2048 MB DDRII Modules) Video Adapter SiS M671 Integrated Video High Performance 2D/3D Graphics Accelerator Shared Memory Architecture up to 256MB Supports Microsoft DirectX 9.0 Supports Vertex Shader 2.
Specifications Feature Specification Keyboard & Pointing Device Winkey Keyboard Built-In TouchPad with Scrolling Function Interface Three USB 2.
Specifications Feature Specification Power Management Supports ACPI 3.0 Power Full Range AC/DC Adapter AC input 100 - 240V, 50 - 60Hz, DC Output 19V, 3.42A (65 Watts) Battery 4 Cell Smart Lithium-Ion Battery Pack, 14.8V/2.4AH 8 Cell Smart Lithium-Ion Battery Pack, 14.8V/4.4AH (Option) Environmental Spec Temperature Operating: Non-Operating: Dimensions & Weight 299mm (w) * 219mm (d) * 26.5-35.
Specifications Feature Optional *Note: The Bluetooth and 3.5G Optional Modules cannot coexist. If one of these factory options is included in your purchase option, then the other is unavailable. Specification Optical Drive Module Options: DVD/CD-RW Combo Drive Module Super Multi Drive Module 300K, 1.3M or 2.0M Pixel USB PC Camera Module (Factory Option) Fingerprint ID Reader Module (Factory Option) USB Floppy Disk Drive 802.
Specifications C C - 6 Specifications
Windows XP Information Appendix D: Windows XP Information This Appendix contains information (including control panel information, driver installation etc.) for users of the Windows XP OS.
Windows XP Information DVD Regional Codes Changing DVD Regional Codes Go to the Control Panel and double-click System > Hardware (tab), click Device Manager, then click the + next to DVD/CD-ROM drives. Double-click on the DVD-ROM device to bring up the Properties dialogue box, and select the DVD Region (tab) to bring up the control panel to allow you to adjust the regional code. DVD region detection is device dependent, not OS-dependent. You can select your module’s region code 5 times.
Windows XP Information Windows XP Start Menu & Control Panel Most of the control panels, utilities and programs within Windows XP (and most other Windows versions) are accessed from the Start menu. When you install programs and utilities they will be installed on your hard disk drive, and a shortcut will usually be placed in the Start menu and/or the desktop. You can customize the look of the Start menu by right-clicking the Start menu and selecting Properties from the menu.
Windows XP Information TouchPad and Buttons/Mouse The TouchPad is an alternative to the mouse; however, you can also add a mouse to your computer through one of the USB ports. The TouchPad buttons function in much the same way as a two-button mouse. Once you have installed the TouchPad driver (see “TouchPad” on page D - 29) you can configure the functions by double-clicking the TouchPad driver icon on the taskbar.
Windows XP Information Function Keys The function keys (F1 - F12 etc.) will act as hot keys when pressed while the Fn key is held down. In addition to the basic function key combinations; visual indicators (see the table below) are available when the hot key utility is installed (see “Hot Key” on page D - 29). After installing the driver an icon will appear in the taskbar.
Windows XP Information Audio Features You can configure the audio options on your computer from the Sounds and Audio Devices Windows control panel, or from the Realtek HD Audio Manager icon in the taskbar/control panel (this will bring up the Realtek Audio Configuration menus). The volume may also be adjusted by means of the Fn + F5/F6 key combination.
Windows XP Information Video Features You can switch display devices, and configure display options, from the Display Properties control panel in Windows as long as the appropriate video driver is installed. To access Display Properties in Windows: 1. 2. 3. 4. 5. 6. 7. 8. 9. Click Start, point to Settings and click Control Panel (or just click Control Panel). Double-click Display (icon) - In the Appearances and Themes category. Click Settings (tab) in the Display Properties dialog box.
Windows XP Information Display Properties & SIS Utility Manager 1 2 3 D Figure D - 5 - Display & Graphics Properties D - 8 Video Features
Windows XP Information You may make changes to the video and display settings by clicking the appropriate menu button. Function Key Combination You can use the Fn + F7 key combination to toggle through the display options: • Notebook Only • External Display Only • Notebook + External Display Make sure you give the displays enough time to refresh.
Windows XP Information Display Devices & Options Besides the built-in LCD, you can also use an external VGA monitor (CRT) or external Flat Panel Display as your display device. A VGA monitor/Flat Panel Display connects to the external monitor port. The following display modes are available.
Windows XP Information Attaching Other Displays If you prefer to use a monitor or flat panel display as your display device, then connect it to the external monitor port on the left of the computer. 1. 2. 3. 4. 5. Attach your external display to the external monitor port, and turn it on. Go to the SIS Utility Manager control panel and click Driver Mode Settings. Click to choose the Primary or Secondary display option from the menu. Click the button to toggle either Clone or Multi-Mode .
Windows XP Information To Enable Extended Desktop (Windows Display Properties) 1. 2. 3. 4. 5. Attach your external monitor to the external monitor port, and turn it on. Click Start, point to Settings (or click Control Panel) and click Control Panel (if you are in Category View choose Appearance and Themes). Double-click Display (icon). In the Display Properties dialog box, click Settings (tab). Click the monitor icon (e.g. 2 ), and make sure you have checked “Extend my Windows desktop onto this monitor.
Windows XP Information Power Management Features To conserve power, especially when using the battery, your computer uses the ACPI power management system. Power management conserves power by controlling individual components of the computer (the monitor and hard disk drive) or the whole system. The Power Options control panel icon in Windows (see page D - 3) allows you to configure power management features for your computer.
Windows XP Information The Power Sources The computer can be powered by either an AC/DC adapter or a battery pack. AC/DC Adapter Use only the AC/DC adapter that comes with your computer. The wrong type of AC/DC adapter will damage the computer and its components. 1. 2. 3. 4. Attach the AC/DC adapter to the DC-in jack at the rear of the computer. Plug the AC power cord into an outlet, and then connect the AC power cord to the AC/DC adapter. Raise the lid/LCD to a comfortable viewing angle.
Windows XP Information Turning on the Computer Now you are ready to begin using your computer. To turn it on simply press the power button on the front panel. When the computer is on, you can use the power button as a Stand by/Hibernate/ Shutdown hot-key button when it is pressed for less than 4 seconds (pressing and holding the power button for longer than this will shut the computer down). Use Power Options in the Windows control panel to configure this feature.
Windows XP Information Resuming Operation Press a key on the keyboard, or move the mouse/TouchPad to resume from Monitor or Hard Disk Stand by. Power Schemes You can set your computer to conserve power through individual components by means of Power Schemes.
Windows XP Information Each Windows Power Scheme will also adjust the processor performance of your machine in order to save power. This is worth bearing in mind if you are experiencing any reduced performance (especially under DC/battery power). Choose the Home/Office Desk scheme for maximum performance when the computer is powered from an AC power source.
Windows XP Information Stand by/Hibernate or Shutdown Error The computer may stop responding when you put it into (or resume from) Stand By or Hibernate, or when you shut down. D System Power Options You can use the system power options to stop the computer’s operation and restart where you left off.
Windows XP Information Stand by Stand by saves the least amount of power, but takes the shortest time to return to full operation. During Stand by the hard disk is turned off, and the CPU is made to idle at its slowest speed. All open applications are retained in memory. When you are not using your computer for a certain length of time, which you specify in the operating system, it will enter Stand by mode to save power.
Windows XP Information Sleep Button You may also configure the Sleep/Resume key combination (Fn + F4) from the menu illustrated. In Windows this is referred to as the Sleep button. Configuring the Power Button The power button may be set to send the computer in to either Stand by or Hibernate mode. In Stand by mode, the LED will blink green. In Hibernate mode the LED will be off (battery) or orange (AC/DC adapter). If you are in a power saving mode set to save power through individual components (e.g.
Windows XP Information Battery Information Please follow these simple guidelines to get the best use out of your battery. Low Battery Warning New Battery Always completely discharge, then fully charge, a new battery (see “Battery FAQ” on page D - 24 for instructions on how to do this). Battery Life Your computer’s battery life is dependent upon many factors, including the programs you are running, and peripheral devices attached.
Windows XP Information Battery life may be shortened through improper maintenance. To optimize the life and improve its performance, fully discharge and recharge the battery at least once every 30 days. We recommend that you do not remove the battery yourself. If you need to remove the battery for any reason, see “Removing the Battery” on page 6 - 3.
Windows XP Information Proper handling of the Battery Pack • DO NOT disassemble the battery pack under any circumstances • DO NOT expose the battery to fire or high temperatures, it may explode • DO NOT connect the metal terminals (+, -) to each other Damaged Battery Warning Should you notice any physical defects (e.g. the battery is bent out of shape after being dropped), or any unusual smells emanating from the notebook battery, shut your computer down immediately and contact your service center.
Windows XP Information Battery FAQ Caution Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used battery according to the manufacturer’s instructions. How do I completely discharge the battery? Use the computer with battery power until it shuts down due to a low battery.
Windows XP Information Driver Installation Insert the Device Drivers & Utilities + User’s Manual CD-ROM, click Install Drivers/Optional (button) and then click the appropriate driver name from the Drivers Installer menu. Follow the instructions to install the driver. Alternatively click Start, navigate (Browse..) to the executable file and then follow the manual setup instructions. Figure 5 - Drivers Installer Screen 1 1.
Windows XP Information Installation Methods (Win XP) If you wish to install the drivers manually, click the Exit button to quit the Drivers Installer application, and then browse to the executable file in the location listed in the table below and follow the installation procedure for each driver. Note that X is the drive letter assigned to the CD/DVD-ROM drive. WinXP SP2 Driver Page # Driver Location Video Page D - 28 X:\XP\01Vga\setup.exe Audio Page D - 28 X:\Drivers\02Audio\Setup.
Windows XP Information Updating/Reinstalling Individual Drivers If you wish to update/reinstall individual drivers it may be necessary to uninstall the original driver.To do this go to the Control Panel in the Windows OS and doubleclick the Add/Remove Programs item. If you see the individual driver listed (if not see below), uninstall it, following the on screen prompts (it may be necessary to restart the computer).
Windows XP Information Driver Installation Procedure Video 1. Click 1.Install VGA Driver > Yes. 2. Click Next > Next > Next > Next. 3. Click Next (click Yes if you want to view the ReadMe file). 4. Click Finish to restart the computer. Audio 1. Click 2.Install Audio Driver > Yes. 2. Click Next. 3. Click Finish to restart the computer. D D - 28 Driver Installation Modem 1. Click 3.Install Modem Driver > Yes. 2. Click OK. 3. The modem is ready for dial-up configuration.
Windows XP Information TouchPad 1. Click 5.Install Touchpad Driver > Yes. 2. Click Next > Next > Next. 3. Click Finish to restart the computer. 4. You may then configure your TouchPad as outlined in “TouchPad and Buttons/Mouse” on page 2 - 8. Module Drivers See the following pages for the driver installation procedures for any of the optional modules included in your purchase configuration. Wireless LAN, Bluetooth & 3.5G Modules Wireless Device Operation Aboard Aircraft CardReader 1. Click 6.
Windows XP Information Taking Still Pictures Double-click the My Computer icon on the desktop, or go the Start menu and point to My Computer, then click it. Double-click the BisonCam, NB Pro icon. . Click Take a new picture in the Camera Tasks box. PC Camera Module Before installing the optional PC Camera module driver use the Fn + F10 key combination to toggle power to the module. There are 3 camera options available for this computer, depending on your purchase configuration. The 300K and 1.
Windows XP Information For the 2.0M Pixel Camera Module: 1. Click Install. 2. Click to select Yes or No in answer to the power system question. 3. Click to select Yes or No to enable/disable the Digital Zoom function. 4. Click Finish > Finish to restart the computer. 5. Run the Video View application program from the Video View shortcut on the desktop, or from the USB2.
Windows XP Information Pre-Allocating File Space You may pre-allocate the file size for the capture file in the BisonCap program. You can choose to ignore this by clicking Cancel. Pre-allocating space on the hard disk can improve the capture quality (particularly of large capture files), by reducing the amount of work the hard disk has to do in finding space for the video data as it is being captured. You may find it helpful to defragment the HDD before capture. D BisonCap (for 300K & 1.
Windows XP Information Eliminating Screen Flicker (BisonCap) If you find that the video screen in the BisonCap program is flickering, you can try to adjust the setting in the Video Capture Filter options. 1. 2. 3. Run the BisonCap application. Go to Options and scroll down to select “Video Capture Filter...”. Click either 50Hz or 60Hz under Frequency in Property Page (tab).
Windows XP Information Pre-Allocating File Space You may pre-allocate the file size for the capture file in the Video View program. Pre-allocating space on the hard disk can improve the capture quality (particularly of large capture files), by reducing the amount of work the hard disk has to do in finding space for the video data as it is being captured. Video View (for 2.
Windows XP Information Eliminating Screen Flicker (Video View) If you find that the video screen in the Video View program is flickering, you can try to adjust the setting in the Video Capture Filter options. 1. 2. 3. Run the Video View program. Go to Options and scroll down to select Video Capture Filter.... Click either 50Hz or 60Hz under Flickering Reduction in Image (tab).
Windows XP Information Zoom (Video View) If you have enabled digital zoom when installing the 2.0M Pixel Camera driver you may use the Options > Setting menu to zoom the camera in and out. Figure D - 3 Setting 1. Run the Video View program. 2. Go to Options and scroll down to select Setting. 3. Use the slider to adjust the zoom level, and click OK to save the setting. Snapshot Folder The Snapshot folder’s default location is on the desktop.
Windows XP Information 802.11 b/g USB WLAN Module Before installing the optional 802.11b/g USB WLAN module driver use the Fn + F11 key combination to toggle power to the module. 802.11b/g USB WLAN Driver Installation 1. Make sure the module is powered on, and then insert the Device Drivers & Utilities + User’s Manual CD-ROM into the CD/DVD drive. 2. Click Optional (button). 3. Click 2.Wireless Lan > Yes. 4. Choose the language you prefer and click OK. 5. Click Next. 6.
Windows XP Information Network Connection Use the Windows Network Connections control panel to access available wireless networks (Start > Settings > Network Connections or Start > Connect To > Show all Connections). Figure D - 5 Wireless Network Control Panels D D - 38 802.
Windows XP Information Bluetooth Module Before installing the optional Bluetooth module driver use the Fn + F12 key combination to toggle power to the module. Bluetooth Driver Installation 1. Make sure the module is powered on, and then insert the Device Drivers & Utilities + User’s Manual CD-ROM into the CD/DVD drive. 2. Click Optional (button). 3. Click Install Software Drivers v2.3.0.1. 4. Choose the language you prefer, and click OK. 5. Click Next. 6.
Windows XP Information User Guide View the BlueSoleil User Guides (Contents and Index) from the Help menu (or press the F1 key) in the IVT Corporation BlueSoleil - Main Window control panel. Click BlueSoleil User Guides in the Contents tab, and click to select the appropriate User Guide from the panel on the right.
Windows XP Information Bluetooth Local Area Connection Icon If you want to display the Local Area Connection icon for the Bluetooth connection in the taskbar, set it up as follows: 1. 2. 3. 4. Access the Network Connections control panel in Windows (Start > Settings > Network Connections OR Start > Connect To > Show all Connections) or by clicking the taskbar icon . Right-click the Bluetooth connection icon, and select Properties.
Windows XP Information 5. 6. 7. Use the Fn + F12 key combination to turn on the Bluetooth module. Run the IVT Corporation BlueSoleil program from the desktop icon or Start menu. The connection status will then be displayed. Figure D - 8 - Bluetooth Connected 8. To disconnect click File from the IVT Corporation BlueSoleil - Main Window, and select Exit (the Local Area Connection will then display “A network cable is unplugged”). 9.
Windows XP Information 3.5G Module If you have included an optional 3.5G module in your purchase option follow the instructions on page 7 - 20 to install the SIM card (which will be provided by your service provider), and then install the application. Before installing the application, make sure that the 3.5G module is on. Use the Fn + _ (see “Function Keys” on page 1 - 10) to toggle power to the 3.5G module. key combination 3G Watcher Application Installation 1.
Windows XP Information Help & Manual If you have included the fingerprint reader in your purchase option (for Model B computers only) you will need to install the driver as per the instructions below. Right-click the taskbar icon to bring up the menu to select Help. Make sure you have administrator’s rights to your computer, and have a Windows password enabled for full security protection. Insert the Device Drivers & Utilities + User’s Manual CD-ROM and click Optional (button).
Windows XP Information User Enrollment 1. 2. 3. 4. 5. 6. 7. 8. 9. Click Start > Programs/All Programs > Protector Suite QL > User Enrollment, or double click the taskbar icon . On the first run of the program you will be asked to click the button to accept the license, and then click OK. Click Next and select “Enrollment to the hard disk”, and click Finish.
Windows XP Information 10. If you put a tick in the “Enable Advanced Security for the current user” tickbox you will be asked to input a PIN before continuing (choose TPM key with PIN and enable and create a backup password). 11. Click Next > Finish. 12. Right-click the taskbar icon to bring up the menu that allows you to Edit Fingerprints, start Control Center, access the Help menu etc. You can also run the Control Center etc. from the Protector Suite QL item in the Programs/All Programs menu. 13.
