Modules & Options Figure 7 - 13 Audio Setup for PC Camera Right-click 7 PC Camera Module 7 - 19
Modules & Options Pre-Allocating File Space You may pre-allocate the file size for the capture file in the BisonCap program. You can choose to ignore this by clicking Cancel. 7 Pre-allocating space on the hard disk can improve the capture quality (particularly of large capture files), by reducing the amount of work the hard disk has to do in finding space for the video data as it is being captured. BisonCap (for 1.
Modules & Options Eliminating Screen Flicker (BisonCap) If you find that the video screen in the BisonCap program is flickering, you can try to adjust the setting in the Video Capture Filter options. 1. 2. 3. Run the BisonCap program. Go to Options and scroll down to select Video Capture Filter.... Click either 50Hz or 60Hz under Frequency in Property Page (tab).
Modules & Options Pre-Allocating File Space You may pre-allocate the file size for the capture file in the Video View program. 7 Pre-allocating space on the hard disk can improve the capture quality (particularly of large capture files), by reducing the amount of work the hard disk has to do in finding space for the video data as it is being captured. Video View (for 2.
Modules & Options Eliminating Screen Flicker (Video View) If you find that the video screen in the Video View program is flickering, you can try to adjust the setting in the Video Capture Filter options. 1. 2. 3. Run the Video View program. Go to Options and scroll down to select Video Capture Filter.... Click either 50Hz or 60Hz under Flickering Reduction in Image (tab).
Modules & Options Zoom (Video View) If you have enabled digital zoom when installing the 2.0M Pixel Camera driver you may use the Options > Setting menu to zoom the camera in and out. Figure 7 - 16 Setting 1. 2. 3. Run the Video View program. Go to Options and scroll down to select Setting. Use the slider to adjust the zoom level, and click OK to save the setting. Snapshot Folder 7 The Snapshot folder’s default location is on the desktop.
Modules & Options Trusted Platform Module Before setting up the TPM functions you must initialize the security platform. Initializing TPM 1. 2. 3. 4. 5. Restart the computer. Enter the PhoenixBIOS Setup Utility by pressing F2 during the POST. Use the arrow keys to select the Security menu. Select TPM Support and set the item to Enabled. The TPM State menu will then appear.
Modules & Options 6. 7. Use the arrow keys to select the TPM State menu. Select TPM State, and set the item to Enable & Activate. Phoenix TrustedCore(tm) Setup Utility Figure 7 - 19 Main Advanced Security TPM State Boot TPM State Exit Item Specific Help Current TPM State: Enabled and Deactivated Change TPM State [Enable & Activate Changes TPM State ] No Change Enable & Activate Deactivate & Disable Clear 7 F1 Esc Help Exit 8.
Modules & Options TPM Module Driver Installation 1. Insert the Device Drivers & Utilities + User’s Manual CD-ROM (Win Vista) into the CD/DVD drive. 2. Click Install Option Drivers (button). 3. Click 4.Install TPM Driver > Yes. 4. Click Next. 5. Click the button to accept the license agreement, and then click Next. 6. Click Next > Next > Install. 7. Click Finish. 8. Run the TPM application program from the shortcut on the desktop, or from the TPM Secure Tools item in the Start > Programs/All Programs menu.
Modules & Options Initializing TPM Password Warning Do not lose the password. If you do so you will be unable to make administrative changes unless you clear the TPM. This could then result in data loss. On the first run of the program you will need to initialize the TPM. 1. 2. 3. 4. 5. Run the application from the Security Manager shortcut on the desktop, or from the TPM Secure Tools item in the Start > Programs/All Programs menu. Click Next.
Modules & Options 6. 7. 8. 9. Click Next. Type a TPM User Password, and then retype to confirm the password. Click Next > (you may want to add Owner Password Tips) Next to begin the user initialization process. Click Finish and then enter the user password and click Logon.
Modules & Options TPM Manager The TPM Manager allows you to manage and check the TPM state, manage your password information, and to backup and restore the TPM data. As TPM is usually administered within large enterprises and organizations, your system administrator will need to assist you in managing the information in the TPM Manager.
Modules & Options Encrypting/Decrypting a File You can encrypt and decrypt files from the context menu in Windows. 1. 2. 3. 4. 5. Right-click the file icon to bring up the context menu. Select File Encryption Tool. Select Encrypt/Decrypt. The file will then be encrypted/decrypted. Click OK.
Modules & Options Creating an Encrypted Virtual Disk You can create an encrypted virtual disk drive (an area of the hard disk you can hide and mount when required) from the Security Manager application. 1. 2. 3. 4. Run the application from the Security Manager shortcut on the desktop, or from the TPM Secure Tools item in the Start > Programs/All Programs menu. Click Encryption Tools. Click Encrypted Virtual Disk. Click New.
Modules & Options 5. 6. 7. 8. Type in the Image File name, Volume Label, location (Browse to file location) and capacity in MB (maximum size is 1GB). Click OK. The disk will now be created. Click OK. Image File DO NOT lose the image file or you will be unable to mount the disk, and this may result in data loss. It is recommended that you save the file to removable media such as a USB Flash drive, and then store it in a safe location.
Modules & Options Mounting and Removing an Encrypted Virtual Disk You can mount and remove the disk using the Security Manager application. 1. 2. 3. 4. 5. Run the application from the Security Manager shortcut on the desktop, or from the TPM Secure Tools item in the Start > Programs/All Programs menu. Click Encryption Tools. Click Encrypted Virtual Disk. Click Mount to bring up any virtual disk, or click Remove to hide the disk. When mounting a disk you will be asked to browse to the image file.
Modules & Options 6. 7. 8. Mounting the disk will require the encrypted image file. If you click Disconnect you can hide the disk without the need to browse to the encrypted image file (simply click Connect to bring up disk again). Clicking Remove will clear the disk information from the menu (the data is still safe), and you will be required to Mount the disk again to access it (by accessing the encrypted image file).
Modules & Options Backing up a TPM Profile It is recommended that you backup your TPM profile and save it to a safe location (DO NOT save the file to a virtual disk). 1. 2. 3. 4. 5. 6. Run the application from the Security Manager shortcut on the desktop, or from the TPM Secure Tools item in the Start > Programs/All Programs menu. Click Backup and Restore. Click Backup > Next. Click Browse.. (button) to save the file to a removable media. Click Next > Next > Finish.
Modules & Options 3.5G Module If you have included an optional 3.5G module (see “Communication” on page A 4 for specification details) in your purchase option, you will have the appropriate software provided for your module. Follow the instructions below to install the USIM card (which will be provided by your service provider), and then install the application. Before installing the application, make sure that the 3.5G module is on.
Modules & Options 5. 6. Insert the USIM card as you would into your mobile phone. The 3.5G module 5 is pictured on the left, and the installed USIM card 6 on the right in Figure 7 - 30. Figure 7 - 30 Module and USIM Card Location 6 5 7 7. Slide the SIMLOCK in the direction of the arrow 7 (Figure 7 - 31) in order to release the lock and lift it up. Figure 7 - 31 SIMLOCK Unlock 7 7 - 38 3.
Modules & Options 8. Insert the USIM card as illustrated in (Figure 7 - 32) and close the SIMLOCK. Figure 7 - 32 Insert the USIM Card 9. Close the SIMLOCK by pushing it in the direction of the arrow in Figure 7 - 33. 7 Figure 7 - 33 SIMLOCK Lock 10. Replace the hard disk assembly, cover, screws and battery etc. 3.
Modules & Options 3G Watcher Application Wireless Device Operation Aboard Aircraft The use of any portable electronic transmission devices aboard aircraft is usually prohibited. Make sure the module(s) are OFF if you are using the computer aboard aircraft. 7 Use the Fn + _ ( ) key combination to toggle power to the 3.5G module, and check the indicator to see if the module is powered on or not (see Table 1 - 5, on page 1 - 10/Table 1 - 3, on page 1 - 7). 7 - 40 3.5G Module With the 3.
Modules & Options Setting Up a Carrier Profile Although the connection information is stored on the USIM card supplied by the service provider, you will need to set up the appropriate carrier profile from the 3G Watcher software. 1. 2. 3. 4. Power on the 3.5G module using the Fn + _( ) key combination (the icon will be green). Access the 3G Watcher application from the Start menu (Start > Programs/All Programs > Sierra Wireless > 3G Watcher), or by clicking the desktop icon .
Modules & Options 5. Figure 7 - 35 User Options Profile Information Profile Details 7 If you have chosen the profile from the dropdown list then most of the information in the General and Advanced tabs should be automatically filled in for you (however check with your service provider for the latest information as you may at least need to add in your Username and Password). Figure 7 - 36 Choose Profile 7 - 42 3.
Modules & Options Connecting to the Service Provider 1. 2. 3. Power on the 3.5G module using the Fn + _( ) key combination (the icon will be green). You can access the 3G Watcher application from the Start menu (Start > Programs/All Programs > Sierra Wireless > 3G Watcher), or by clicking the desktop icon . The software will run and display the service provider name (see “Setting Up a Carrier Profile” on page 7 - 41). 7 4. 5. Click Connect to begin the connection process.
Modules & Options 6. When the connection is successful a taskbar notification will appear (as below). 7. You can then access the internet, download e-mail etc. as per any internet connection. While you are connected the taskbar icon will be green (it will be red when the program is running but not connected). To disconnect click the Disconnect icon. Figure 7 - 37 Connected Taskbar Notification 8. 7 9. Figure 7 - 38 3GWatcher Connected 10. The program will disconnect from the service provider. 11.
Modules & Options 12. If you click the 3G Watcher close icon to click OK to confirm the program exit. a message will be displayed asking you Figure 7 - 39 Exit Warning 13. Exiting the program DOES NOT turn off the 3.5G module, and you will need to press the Fn + _( ) key combination to turn off the module (pay careful attention to this aboard aircraft - see “Wireless Device Operation Aboard Aircraft” on page 7 - 40). 14.
Modules & Options Short Messaging Service In addition to standard internet services you may also send and receive SMS text messages using the 3G Watcher program, if your service supports SMS. Reading SMS Messages 1. 2. 3. 4. 7 The SMS message indicator in the main window will notify you of any new messages received. Double-click the icon or select Tools > SMS Express. Select the inbox folder and select any message to read it.
Troubleshooting Chapter 8: Troubleshooting Overview Should you have any problems with your computer, before consulting your service representative, you may want to try to solve the problem yourself. This chapter lists some common problems and their possible solutions. This can’t anticipate every problem, but you should check here before you panic. If you don’t find the answer in these pages, make sure you have followed the instructions carefully and observed the safety precautions in the preface.
Troubleshooting Basic Hints and Tips Many of the following may seem obvious but they are often the solution to a problem when your computer appears not to be working. • Power - Is the computer actually plugged into a working electrical outlet? If plugged into a power strip, make sure it is actually working. Check the LED Power & Communication Indicators (see “LED Indicators” on page 1 - 7) to see the computer’s power status.
Troubleshooting Backup and General Maintenance • Always backup your important data, and keep copies of your OS and programs safe, but close to hand. Don’t forget to note the serial numbers if you are storing them out of their original cases, e.g. in a CD wallet. • Run maintenance programs on your hard disk and OS as often as you can. You may schedule these programs to run at times when you are not using your computer.
Troubleshooting Viruses • Install an Anti-Virus program and keep the definitions file (the file which tells your program which viruses to look for) up to date. New computer viruses are discovered daily, and some of them may seriously harm your computer and cause you to lose data. Anti-Virus programs are commercially available and the definitions file updates are usually downloadable directly from the internet. • Be careful when opening e-mail from sources you don’t know.
Troubleshooting Upgrading and Adding New Hardware/Software • Do not be tempted to make changes to your Windows Registry unless you are very sure of what you are doing, otherwise you will risk severely damaging your system. • Don’t open your computer or undertake any repair or upgrade work if you are not comfortable with what you are doing. • Read the documentation.
Troubleshooting • Thoroughly check any recent changes you made to your system as these changes may affect one or more system components, or software programs. If possible, go back and undo the change you just made and see if the problem still occurs. • Don’t over complicate things.
Troubleshooting Problems and Possible Solutions Problem Possible Cause - Solution You turned on the power but it doesn’t work. Battery missing / incorrectly installed. Check the battery bay, make sure the battery is present and seated properly (the design of the battery only allows it to go in one way). Make sure there’s nothing interfering with the battery contacts. The battery LED power indicator , is blinking orange. Low Battery. Plug in the DC power source.
Troubleshooting Problem Possible Cause - Solution The computer feels too hot. Make sure the computer is properly ventilated and the Vent/Fan intakes are not blocked. If this doesn’t cool it down, put the system into Hibernate mode or turn it off for an hour. Make sure the computer isn’t sitting on a thermal surface (see “Overheating” on page 1 - 14). Make sure you’re using the correct adapter.
Troubleshooting Problem You forget password. the Possible Cause - Solution boot If you forget the password, you may have to discharge the battery of the CMOS. Contact your service representative for help. Password Warning If you choose to set a boot password, NEVER forget your password. The consequences of this could be serious. If you cannot remember your boot password you must contact your vendor and you may lose all of the information on your hard disk.
Troubleshooting Problem Unwelcome numbers appear when typing. Possible Cause - Solution If the LED is lit, then Num Lock is turned ON. (see “LED Indicators” on page 1 - 7). Other Keyboards If your keyboard is damaged or you just want to make a change, you can use any standard USB keyboard. The system will detect and enable it automatically. However special functions/hot keys unique to the system’s regular keyboard may not work. 8 The system freezes or the screen goes dark.
Troubleshooting Problem Possible Cause - Solution The PC Camera module cannot be detected. The module is off. Press the Fn + F10 key combination in order to enable the module (see “Function/Hot Key Indicators” on page 1 - 10). Run the BisonCap/Video View program to view the camera picture. The Wireless LAN/ Bluetooth/ PC Camera/ 3.5G modules cannot be configured. The driver(s) for the module(s) have not been installed.
Troubleshooting 8 8 - 12
Interface (Ports & Jacks) Appendix A: Interface (Ports & Jacks) Overview The following chapter will give a quick description of the interface (ports & jacks) which allow your computer to communicate with external devices, connect to the internet etc.
Interface (Ports & Jacks) Notebook Ports and Jacks Item Description Card Reader Port The card reader allows you to use some of the latest digital storage cards. Push the card into the slot and it will appear as a removable device. DC-In Jack Plug the supplied AC/DC adapter into this jack to power your computer. External Monitor (VGA) Port This port allows you to connect an external monitor, or Flat Panel Display, to get dual video or simultaneous display on the LCD and external monitor/FPD.
Interface (Ports & Jacks) Item Description Mini-IEEE 1394 Port This port allows a high-speed connection to various peripheral devices, e.g. external disk drives and digital cameras (see note below). Mini-IEEE 1394 Port The Mini-IEEE 1394 port only supports SELF POWERED IEEE 1394 devices. RJ-11 Modem Jack RJ-45 LAN Jack This port connects to the built-in modem. You may plug the telephone line directly into this RJ-11 telephone connection. Note: Broadband (e.g.
Interface (Ports & Jacks) Item Description USB 2.0/1.1 Ports These USB 2.0 compatible ports (USB 2.0 is fully USB 1.1 compliant) are for low-speed peripherals such as keyboards, mice or scanners, and for high-speed peripherals such as external HDDs, digital video cameras or high-speed scanners etc.
Intel Video Driver Controls Appendix B: Intel Video Driver Controls The basic settings for configuring the LCD are outlined in “Video Features” on page 1 - 16. Intel Video Driver Installation DVMT Notes Make sure you install all the drivers in the order indicated in Table 4 - 1, on page 4 - 3. Video 1. Insert the Device Drivers & Utilities + User’s Manual CD-ROM (Win Vista) into the CD/DVD drive. 2. Click Install Vista Drivers. 1. Click 1.Install Video Driver > Yes. 2. Click Next > Yes > Next > Next.
Intel Video Driver Controls Taskbar Icon The Intel GMA control panel can also be accessed by clicking the icon in the taskbar and selecting Graphics Properties from the menu. Intel Graphics Properties More advanced video configuration options are provided by the Intel(R) Graphics Media Accelerator Driver for Mobile. 1. 2. Open the Display Settings control panel (see “Video Features” on page 1 - 16) and click Advanced Settings (button). Click the Intel(R)... tab and click Graphics Properties (button).
Intel Video Driver Controls You may make changes to the devices, color, schemes, Hot Keys etc. by clicking the appropriate menu item or button. Click Information (button) to obtain useful information about the graphics properties of the computer, and see the Support tab in Information to get weblinks to the latest information on the Intel Website. Help Menus Right-click on many of the items in the tabs to bring up the “What’s This?” button. Click the “What’s This?” button to bring up the help menu.
Intel Video Driver Controls Application.exe You will need to locate the actual application executable (.exe) file, not just the shortcut. To find the application rightclick its shortcut on the desktop click Properties. Click the Shortcut (tab) and see where the executable file is located by clicking the Find Target (button). Note the location and you will then be able to browse to this file.
Intel Video Driver Controls Attaching Other Displays Besides the built-in LCD, you can also use an external monitor/flat panel display, connected to the external monitor port at the rear of the computer, as your display device. The following are the display options: 1. 2. The built-in LCD OR an external monitor/flat panel display connected to the external monitor port (Single Display). The built-in LCD AND an external monitor/flat panel display connected to the external monitor port (Multiple Display).
Intel Video Driver Controls Configuring from Intel® GMA Driver for Mobile 1. Multiple Display 2. 3. At least one other display must be attached in order to view Multiple Display options. Go to the Intel Graphics Properties control panel (see “Intel Graphics Properties” on page B - 2) and click Display Devices. Click to choose the display option from the Multiple Display menu. Click Apply (and OK to confirm the settings change) and OK (button).
Intel Video Driver Controls Display Modes Single Display Only one of your attached displays is used. Intel(R) Dual Display Clone (mirrored) This mode will drive multiple displays with the same content. Each device may be configured independently for different resolutions, refresh rates, color quality etc. Use this feature to display the screen through a projector for a presentation. Extended Desktop (extended) This mode allows a desktop to span multiple displays and acts as a large workspace.
Intel Video Driver Controls To Enable Intel(R) Dual Display Clone 1. 2. 3. 4. 5. Figure B - 5 Display Devices & Settings B B - 8 Display Modes Attach your external monitor to the external monitor port, and turn it on. Go to the Intel Graphics Properties control panel (see “Intel Graphics Properties” on page B - 2) and click Display Devices. Click to choose Intel(R) Dual Display Clone (Multiple Display). Click Apply, and OK to confirm the settings change.
Intel Video Driver Controls To Enable Extended Desktop 1. 2. 3. 4. 5. Attach your external monitor to the external monitor port, and turn it on. Go to the Intel Graphics Properties control panel (see “Intel Graphics Properties” on page B - 2) and click Display Devices. Click to choose Extended Desktop (Multiple Display). Click Apply, and OK to confirm the settings change. Click Display Settings to adjust the settings for the attached devices.
Intel Video Driver Controls Using Windows Vista to Enable Extended Mode Display Settings Extended Desktop Use the control panel to drag the monitors to match the physical arrangement you wish to use. 1. 2. 3. 4. 5. You can drag any icons or windows across to either display desktop, which makes it possible to have one program visible in one of the displays, and a different program visible in the other display.
Intel Video Driver Controls Using Display Settings to Enable Extended Mode 1. 2. 3. Attach your external display to the external monitor port, and turn it on. Open the Display Settings control panel (see “Video Features” on page 1 - 16). Click the monitor icon (e.g. 2 ), and make sure you have checked “Extend my Windows desktop onto this monitor.” and click Apply. Click the appropriate monitor icon (e.g. 2 ) to be able to select the option to extend the desktop on to it.
Intel Video Driver Controls B B - 12
Specifications Appendix C: Specifications Latest Specification Information The specifications listed in this Appendix are correct at the time of going to press. Certain items (particularly processor types/ speeds and CD/DVD device types) may be changed, delayed or updated due to the manufacturer's release schedule. Check with your service center for details.
Specifications Feature Processor C Specification Intel® Core™2 Duo Processor (478-pin) Micro-FC-PGA Package - Socket-P T7100 65nm (65 Nanometer) Process Technology 2MB On-die L2 Cache & 800MHz FSB 1.8 GHz Intel® Core™2 Duo Processor (478-pin) Micro-FC-PGA Package - Socket-P T7300/ T7500/ T7700 65nm (65 Nanometer) Process Technology 4MB On-die L2 Cache & 800MHz FSB 2.0/ 2.2/ 2.4 GHz Core Logic Intel GM965+ICH8M Chipset LCD 12.
Specifications Feature Specification Storage One Changeable 12.7mm(h) Optical Device (CD/DVD) Type Drive (see “Optional” on page C - 5) Easy Changeable 2.5" 9.5 mm (h) SATA (Serial) HDD Audio High Definition Audio (HDA) Compliant with Microsoft UAA (Universal Audio Architecture) Direct Sound 3D™ Compatible EAX™ 1.0 & 2.
Specifications Feature Communication *Note: The Bluetooth and 3.5G Optional Modules cannot coexist. If one of these factory options is included in your purchase option, then the other is unavailable. C Specification 10M/100Mb Base-T Ethernet LAN 56K MDC Modem V.90 & V.92 Compliant 802.11 a/b/g OR 802.11 a/g/n USB Wireless LAN Module (Option) 1.3M or 2.0M Pixel USB PC Camera Module (Factory Option) Bluetooth OR 3.5G Module Options: *Bluetooth 2.
Specifications Feature Specification Dimensions & Weight 299mm (w) * 219mm (d) * 26.5-35.7mm (h) 1.88 kg With 4 Cell Battery and ODD Optional Optical Drive Module Options: DVD/CD-RW Combo Drive Module DVD Dual Drive Module Super Multi Drive Module *Bluetooth 2.0 + EDR (Enhanced Data Rate) Module (Factory Option) OR *UMTS/HSPDA-based 3.5G Module with Mini Card Interface (Factory Option) Quad-band GSM/GPRS (850 MHz, 900 MHz, 1800 MHz, 1900 MHz) UMTS WCDMA FDD (2100 MHz) *Note: The Bluetooth and 3.
Specifications C C - 6 Specifications
Windows XP Information Appendix D: Windows XP Information This Appendix contains information (including control panel information, driver installation etc.) for users of the Windows XP OS.
Windows XP Information DVD Regional Codes Changing DVD Regional Codes Go to the Control Panel and double-click System > Hardware (tab), click Device Manager, then click the + next to DVD/CD-ROM drives. Double-click on the DVD-ROM device to bring up the Properties dialogue box, and select the DVD Region (tab) to bring up the control panel to allow you to adjust the regional code. DVD region detection is device dependent, not OS-dependent. You can select your module’s region code 5 times.
Windows XP Information Windows XP Start Menu & Control Panel Most of the control panels, utilities and programs within Windows XP (and most other Windows versions) are accessed from the Start menu. When you install programs and utilities they will be installed on your hard disk drive, and a shortcut will usually be placed in the Start menu and/or the desktop. You can customize the look of the Start menu by right-clicking the Start menu and selecting Properties from the menu.
Windows XP Information TouchPad and Buttons/Mouse The TouchPad is an alternative to the mouse; however, you can also add a mouse to your computer through one of the USB ports. The TouchPad buttons function in much the same way as a two-button mouse. Once you have installed the TouchPad driver (see “TouchPad” on page D - 31) you can configure the functions by double-clicking the TouchPad driver icon on the taskbar.
Windows XP Information Function Keys The function keys (F1 - F12 etc.) will act as hot keys when pressed while the Fn key is held down. In addition to the basic function key combinations; visual indicators are available when the hot key utility is installed (see “Hot Key” on page D - 31). When the driver is installed, an icon will appear in the taskbar. Keys Function Keys Function Fn + ~ Play/Pause (in Audio/Video Programs) Fn + F7 Display Toggle 3.
Windows XP Information Audio Features You can configure the audio options on your computer from the Sounds and Audio Devices Windows control panel, or from the Realtek HD Audio Manager icon in the taskbar/control panel (this will bring up the Realtek Audio Configuration menus). The volume may also be adjusted by means of the Fn + F5/F6 key combination.
Windows XP Information Video Features Your computer has built-in Intel (Intel GM965) video. You can switch display devices, and configure display options, from the Display Properties control panel in Windows as long as the appropriate video driver is installed. To access Display Properties in Windows: 1. 2. 3. 4. 5. 6. 7. 8. 9. Click Start, point to Settings and click Control Panel (or just click Control Panel). Double-click Display (icon) - In the Appearances and Themes category.
Windows XP Information Display & Graphics Properties Taskbar Icon You can also access the controller properties from the taskbar. Click on the icon to bring up the menu and scroll to Graphics Properties. If you cannot see the tray icon go to the Intel(R) Graphics Media Accelerator Driver for Mobile tab and click the “Show Tray Icon” tickbox. Alternatively right-click the desktop and select Graphics Options > Tray Icon > Enable.
Windows XP Information You may make changes to the devices, color, schemes, Hot Keys etc. by clicking the appropriate menu item or button. Click Information (button) to obtain useful information about the graphics properties of the computer, and see the Support tab in Information to get weblinks to the latest information on the Intel Website.
Windows XP Information Display Devices & Options Besides the built-in LCD, you can also use an external VGA monitor (CRT) or external Flat Panel Display as your display device. A VGA monitor/Flat Panel Display connects to the external monitor port. The following display modes are available.
Windows XP Information Attaching Other Displays If you prefer to use a monitor or flat panel display, connect it to the external monitor port at the rear of the computer. 1. 2. 3. 4. Attach your external display to the external monitor port, and turn it on. Go to the Intel GMA Graphics Properties control panel and click Display Devices. Click to choose the display option from the Multiple/Single Display menu. Click Apply, and OK to confirm the settings change.
Windows XP Information To Enable Intel(R) Dual Display Clone (Intel GMA) 1. 2. 3. 4. 5. D Attach your external display to the external monitor port, and turn it on. Go to the Intel GMA Graphics Properties control panel and click Display Devices. Click to choose Intel(R) Dual Display Clone (Multiple Display). Click Apply, and OK to confirm the settings change. Click Display Settings to adjust the settings for the attached devices.
Windows XP Information To Enable Extended Desktop (Intel GMA) 1. 2. 3. 4. 5. Attach your external display to the external monitor port, and turn it on. Go to the Intel GMA Graphics Properties control panel and click Display Devices. Click to choose Extended Desktop (Multiple Display). Click Apply, and OK to confirm the settings change. Click Display Settings to adjust the settings for the attached devices. Click the appropriate monitor icon and drag it to match the physical arrangement you wish to use (e.
Windows XP Information To Enable Extended Desktop (Windows Display Properties) 1. 2. 3. 4. 5. Attach your external monitor to the external monitor port, and turn it on. Click Start, point to Settings (or click Control Panel) and click Control Panel (if you are in Category View choose Appearance and Themes). Double-click Display (icon). In the Display Properties dialog box, click Settings (tab). Click the monitor icon (e.g. 2 ), and make sure you have checked “Extend my Windows desktop onto this monitor.
Windows XP Information Power Management Features To conserve power, especially when using the battery, your computer uses the ACPI power management system. Power management conserves power by controlling individual components of the computer (the monitor and hard disk drive) or the whole system. The Power Options control panel icon in Windows (see page D - 3) allows you to configure power management features for your computer.
Windows XP Information The Power Sources The computer can be powered by either an AC/DC adapter or a battery pack. AC/DC Adapter Use only the AC/DC adapter that comes with your computer. The wrong type of AC/DC adapter will damage the computer and its components. 1. 2. 3. 4. Attach the AC/DC adapter to the DC-in jack at the rear of the computer. Plug the AC power cord into an outlet, and then connect the AC power cord to the AC/DC adapter. Raise the lid/LCD to a comfortable viewing angle.
Windows XP Information Turning on the Computer Now you are ready to begin using your computer. To turn it on simply press the power button on the front panel. When the computer is on, you can use the power button as a Stand by/Hibernate/ Shutdown hot-key button when it is pressed for less than 4 seconds (pressing and holding the power button for longer than this will shut the computer down). Use Power Options in the Windows control panel to configure this feature.
Windows XP Information Resuming Operation Press a key on the keyboard, or move the mouse/TouchPad to resume from Monitor or Hard Disk Stand by. Power Schemes You can set your computer to conserve power through individual components by means of Power Schemes.
Windows XP Information Each Windows Power Scheme will also adjust the processor performance of your machine in order to save power. This is worth bearing in mind if you are experiencing any reduced performance (especially under DC/battery power). Choose the Home/Office Desk scheme for maximum performance when the computer is powered from an AC power source.
Windows XP Information Stand by/Hibernate or Shutdown Error The computer may stop responding when you put it into (or resume from) Stand By or Hibernate, or when you shut down. D System Power Options You can use the system power options to stop the computer’s operation and restart where you left off.
Windows XP Information Stand by Stand by saves the least amount of power, but takes the shortest time to return to full operation. During Stand by the hard disk is turned off, and the CPU is made to idle at its slowest speed. All open applications are retained in memory. When you are not using your computer for a certain length of time, which you specify in the operating system, it will enter Stand by mode to save power.
Windows XP Information Sleep Button You may also configure the Sleep/Resume key combination (Fn + F4) from the menu illustrated. In Windows this is referred to as the Sleep button. Configuring the Power Button The power button may be set to send the computer in to either Stand by or Hibernate mode. In Stand by mode, the LED will blink green. In Hibernate mode the LED will be off (battery) or orange (AC/DC adapter). If you are in a power saving mode set to save power through individual components (e.g.