CleveMed Proprietary Information
CleveMed Proprietary Information !" # $ )-&3$ 0, $ 5 6$ , #9 <* + # , % & '( &'% )''* + , )''% - ($ . /. $ !. /. 01 , # 2 2 % & '( &'-( * / 1 !! $ !! 4* + , 1 $ 4* + , . / " !$ 7 7 888. * +, . / $ * + # , + 0 +# ; * + #;" + ./ : #. " : # . (((% Cleveland Medical Devices, Inc. 2 4415 Euclid Avenue, Cleveland, Ohio 4415 , tel: 1-877-clevemed, www.clevemed.
CleveMed Proprietary Information Chapter 1: About BioRadio 150 General Device Description: BioRadio 150 (Figure 1) is a wireless data acquisition system capable of recording multiple physiological signals from users in real time. Using sophisticated wireless and miniaturization technologies, the BioRadio 150 provides physiological data acquisition that is untethered thus allowing the users to move freely while monitoring their own physiological signals on the PC.
CleveMed Proprietary Information BioRadio 150 consists of two hardware components (User Unit and Computer Unit) and a software component (BioRadio Capture Lite). The User Unit is carried by the person (on the belt) and is responsible for acquiring the physiological signals from sensors attached on the body. The User Unit processes the physiological signals and wirelessly transmits it to the Computer Unit using CleveMed’s proprietary telemetry protocol.
CleveMed Proprietary Information Airflow inputs (differential) Antenna Oxygen Saturation input Aux. DC input (not seen in picture but located underneath the patient Gnd connector) CH 1 +,- to CH 8 +,Used for differential biopotential inputs. Patient Gnd connection Figure 2. The BioRadio 150 User unit. Cleveland Medical Devices, Inc. 5 4415 Euclid Avenue, Cleveland, Ohio 4415 , tel: 1-877-clevemed, www.clevemed.
CleveMed Proprietary Information Computer Unit (Figure 3): The Computer Unit is a smaller device that plugs into the USB port of any PC. As mentioned earlier, the Computer Unit is responsible for receiving the data from the User Unit, demodulates it and sends it to the PC. Similar to the User Unit, the Computer Unit contains a radio transceiver that operates in the 900 MHz ISM band. The Computer unit is powered from the PC and thus has no external power supply.
CleveMed Proprietary Information BioRadio Capture Lite: BioRadio Capture Lite is a basic data acquisition and display software offered with BioRadio 150 (Figure 4). The program has a sub-menu on the right-hand side of the screen that provides information about the device and the data as well as allows the user to select basic functionality. Under the Control sub-menu (Figure 4) the software allows the user to Start and Stop acquisition, change display update rate, and to Save the data.
Minimum System Requirements Personal computer with Pentium III™ 500 MHz or higher processor (or equivalent); Microsoft® Windows 98/NT 4/2000/XP; 64 MB of installed memory; Minimum 500 MB free hard disk space (1 GB recommended); CD-ROM Drive; SVGA 256-color or higher resolution video adapter; Mouse or other pointing device; One free USB port The Computer Unit communicates with your computer through a standard USB port.
Contraindications Interference may occur in the vicinity of equipment marked with the following symbol: This device complies with CFR 47 – Part 15, 15.109(b) and 15.249. Such interference could be caused by the use of multiple BioRadio 150 units operating in the same vicinity. If you purchase multiple units please notify Cleveland Medical Devices Inc. at the time you place your order so that each of your units may be programmed to different frequencies.
CleveMed Proprietary Information Package Contents and Warranty Information Cleveland Medical Devices Inc. thanks you for your recent product purchase. For your benefit, we recommend that you record the pertinent details below. If necessary, this information will allow us to better serve your needs. We highly recommend that you staple a copy of the sales receipt to the blank pages in the back of this manual.
Chapter 2: Setting Up the BioRadio 150 Installing the BioRadio Capture Lite Program 1. Insert the BioRadio Capture Lite installation CD-ROM into your computer’s CDROM drive 2. Double-click on the BioRadio Capture Lite Installer program 3. Follow the on-screen prompts to install the Software 4.