ENGLISH ESpAñoL FRANÇAIS CSC48 Operating Manual ClearSounds® QUATTRO Bluetooth Amplified Stereo Neckloop Accessory V508 1 – ENGLISH
TABLE OF CONTENTS PRIOR TO USE Pg. 3............. Congratulations Pg. 4-5.......... Important Safety Instructions Pg. 6-7.......... Location of Controls INSTALLATION & SET UP Pg. Pg. Pg. Pg. 8............. Parts checklist 8-9.......... Charging 10........... Power ON and Off 10........... Wearing FUNCTIONS Pg. Pg. Pg. Pg. Pg. Pg. Pg. 11-12..... Pairing to a cell phone 12-13..... Pairing to additional devices 13-14..... Adjusting Volume 14-15..... Marking and Receiving Calls 16...........
PRIOR TO USE Congratulations on your purchase of the QUATTRO Amplified Neckloop from ClearSounds Communications®. Please read this User Manual carefully in order to get the best use out of your new accessory. Keep this manual safe for easy reference. Please visit our website at www.clearsounds.com to register your product, download additional manuals and review troubleshooting tips. Be sure to save your sales receipt as your proof of purchase should you need warranty service.
█ IMPORTANT SAFETY INSTRUCTIONS This product is a mobile solution built on Bluetooth technology. Please read and understand the Installation Guide and User Manual before using your QUATTRO. Electromagnetic Interference/Compatibility: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility.
may be a remote risk of electric shock from lightning. If the electrical storm is present in your immediate area, possibility of electrical shock exists. WARNING: Occasionally a power surge can occur on electrical lines without warning. With any electrical device that you plug into an outlet, it is suggested you use a surge protector. surge protector will prevent power surges from damaging your phone. Surge protectors are simple devices available at your local hardware store.
PLEASE SAVE THESE INSTRUCTIONS █ LOCATION OF CONTROLS 3 5 1 TOP 4 2 BOTTOM LEFT SIDE 6 – ENGLISH RIGHT SIDE
TOP SIDE 1. Indicator LED BOTTOM SIDE 2. Charging Port and Headset Jack LEFT SIDE 3. Neckloop Volume Control 4. Headset Volume Control/Song Skip Key RIGHT SIDE 5. Multi-function Button (MFB) INTRODUCTION & SET UP Bluetooth is a specification for short-range radio links between mobile computers, mobile phones, digital cameras and other portable devices. The radio operates on the globally available 2.45 GHz ISM ‘free band’, allowing users to use “Bluetooth” equipment worldwide.
█ PARTS CHECKLIST Check the contents of the box - The QUATTRO should contain: Neckloop AC Charger Car Charger USB Cable User Manual █ CHARGING THE QUATTRO Before using your QUATTRO for the first time, you need to charge its self-contained Li-Polymer battery for approximately 2-3 hours, or until the LED Indicator stops flashing blue and turns off. Method 1: Using the AC Power Supply 1. Connect the 3.
2. Plug the car charger into the car DC outlet of your vehicle. The QUATTRO is fully charged when the light goes out. After a full charge, remove the charger from the DC outlet and detach the USB cable from the unit. Method 3: Using A Laptop 1. Connect the 3.5mm end of the USB cable into the charging port of the QUATTRO and then connect the other end into a USB jack on your PC. The QUATTRO is fully charged when the light goes out.
█ POWER ON AND OFF To turn the QUATTRO ON: Press and hold the Multi-Function Button on the side of the QUATTRO for 3 seconds. A series of 4 tones (low to high) can be heard from your hearing aid/cochlear processor when it is in t-coil mode or from the headset if connected. The LED flashes blue 4 times. To turn the QUATTRO OFF: Press and hold the Multi-Function Button on the side of the QUATTRO for 3 seconds.
FUNCTIONS █ PAIRING TO A CELL PHONE Before using your QUATTRO for the first time, you must pair it with your Bluetooth phone. “Pairing” creates a link between your Bluetooth equipped cell phone and the QUATTRO, and it allows your cell phone to remember the QUATTRO’s unique ID by adding it to a list of paired devices in the phone. The QUATTRO should be paired once with the phone before use.
6. The phone information is now stored in the QUATTRO memory. 7. The QUATTRO LED indicator will flash blue every 3 seconds when paired and is now in standby mode, ready to make or receive calls. If the QUATTRO is not successfully paired within 2 minutes, it will automatically leave pairing mode. If you still want pairing, you will need to repeat the steps listed above. IMPORTANT: 1.
store pairing information for up to eight (8) different devices with Bluetooth wireless capability. Devices are stored in a “Paired Device List” in the memory in a time sequence. When an attempt to pair more than eight devices is made, the oldest paired device is removed from the memory list. Any of the eight paired devices can initiate a connection to the QUATTRO. The QUATTRO will automatically initiate a connection (once turned on) with the last device to which it was connected.
repeatedly, but do not press and hold for longer than 1 second as this will activate the Track Selection function (see page 18). █ MAKING AND RECEIVING CALLS The QUATTRO supports Hands-Free, Headset, Advanced Audio Distribution (A2DP) and Audio/Visual Remote Control (AVRCP) Profiles. Accessing call functions depends on which profile your phone supports. You can activate all functions for HandsFree Profile using the following table. NOTE: Some phones do not support all features listed.
Power OFF -- ON (idle) Make a Voice Dial Call ON ON (idle) Redialing Last Number ON ON (idle) ON (ring) ON (ring) Ending A Call ON (on call) ON (on call) Rejecting a Call ON ON (ring) (phone ring) ON (on call) ON (on call) Receiving A Call Put Call on Hold Resume a Call On Hold Answering 2nd Incoming Call ON (active On (active call on Hold) call on Hold) ON (on call) ON (on call) To Switch Between 2 active calls Transfer call from Neckloop to Phone ON (on call) ON ON (on call) ON Tr
█ LED INDICATOR LED Indicator status with NO Charger Attached LED Status QUATTRO Action OFF Flashes red and blue alternately 10 rapid flashes Flashes at 3 second intervals ( 0.1 seconds ON, 2.9 seconds OFF) Flashes at 8 second intervals (2.0 seconds ON, 6.
█ AUDIO TONES Audio Tone QUATTRO Action Series of 4 tones (low to high) Series of 4 tones (high to low) Single High Tone Ring Tone Single High Tone Beep once every 30 seconds No Audio Indication (deteriorating audio quality) Singe Low Tone (depends on phone) Dual High/Low tone if supported by the phone 5 Rapid tones repeated every 60 seconds after the phone goes out of network service for more than 20 seconds Power ON Power OFF Pairing Successful Incoming Call End Call Battery Low Out of Range Initiate
Playing Music Find the desired music on your mobile phone or other Bluetooth device, then press the Multi-Function Button once to play it. Track Selection (Song Skip) If you have Audio/Video Remote Control Profile (AVRCP) on your audio device, you will be able to control the track selection on the QUATTRO. If you do not have AVRCP on your audio device, you can use your audio device to control the track selection.
TECHNICAL SPECIFICATIONS Model Name: QUATTRO Bluetooth Stereo Amplified Neckloop Bluetooth Compliance: Bluetooth Specifications version 2.0 Supported Profiles: Headset, **A2DP, AVRCP and Hands-free Frequency Band: 2.
Purchase accessories for your Clearsounds QUATTRO: Optional Stereo Headset: CS-RS062 SmartSound Earbuds with Reverse Sound technology. Recommended for optimal sound quality. Optional Bluetooth Hub: Used for connecting your QUATTRO to amulti-line office telephone system. Call ClearSounds for more information. Optional Stereo Audio Transmitter: CS-BTDONGLE is used for connecting your Quattro to a stereo audio output or source including Televisions.
The warranty does not cover accidents, negligence or breakage to any parts. This includes shipping damage, failure to follow instructions, misuse, fire, floods, use of incompatible accessories, Acts of God or failure in your phone service carrier’s line service. The product must not be tampered with or taken apart by anyone who is not an authorized ClearSounds Communications® representative. Tampering with the phone will void any written or implied warranties.