Portable Telephone Amplifier VOLUME TONE HI LO QH2 USER'S MANUAL
? This telephone amplifier, which is compatible with Bluetooth headsets, is ideal for use at home, the office or while travelling to help you never miss a word. The unit cannot be used together with any phone where the keypad is located in the handset. Telephone Compatibility Because not all telephone handsets are wired in a standard way, we have provided a 12-position compatibility switch. 1. Place the handset in the cradle. 2. Adjust the switch by turning it one "click" to the next setting.
Answering a Call 6. Insert the long phone cord (included) into the LINE jack. After the headset rings, press MFB QH2 once to answer the call. You can also answer the call using the headset or answer the call after handset is lifted automatically. 7. An optional handset lifter can be inserted in the LIFT jack. To end a call: Press MFB QH2 again. If you do not hear a dial tone or the person you are calling cannot hear you, consult the "Telephone Compatibility" section.
Lifter Pairing 1. Place the Bluetooth amplifier within 1 meter away from your Bluetooth headset. OnQ QH2 Q : 2. Press and hold MFB for several seconds until the red and blue LED flash alternately. 1 3 2 On Bluetooth headset: 3. Use your Bluetooth headset to search for devices. For more information about your headset operation, please refer to the user manual of headset. 1. Ringing sensor 2. Lifter height adjustment 3.
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement 7.1.