Tri 5225 Wiley Post Way Suite 500 Halt Lake Thy, UT 84118 1.800.945.7730 / Telethons 1.801.975.7200 FAX 18013085711 Eel Tate SUDDENNESS NOBS. o0m Ono Web ve BRO. BAN User Manual DIALOG 10 USE Microphone System Remote Software & 2021 Clarions, no. All rights reserved. No part of this document may ba reproduced in any form of by any means without written permission from Clear One, Carpeting Part No. DOG-0482 001 OCTOBER 2021 (Rev. 1.0} Printed in the United States of America.
About the DIALOG 10 USB DIALOG 10 UBB 1 CHANNEL WIRELESS MICROPHONE Elevate DIALOG 10 USB is a compact, feature-rich and complete single channel wireless microphone system that consists of a receiver with builtin antenna, and all types of transmitters boundary tabletop, goose neck podium, handheld, belt pack and docking station, it uses 2.4 GHz universal RF band. DIALOG 10 USB system can be connected directly to a lap-top or desktop PC via USE {type C) connection.
WSB800 and DIALOG 20 He mole Software This software is used to configure the DIALOG 10 USB wireless microphone system. This manual explains the software in greater details in the following sections. PO REQUIREMENTS The minimum requirements for the Windows version of WS800 & DIALOG 20 software are: » Operating System: Microsoft Windows and 64 bit} = CPU: 1.
a Stun DOWSED and halon 20 Beans Softens le Pele Destination Location Pita shipbuilder WRR00 rid Dali J Rte Software bani? Sen list WERE Sid Dis Re Sees bi te fla Forge, Theron del owt, [enn oils le sh select differences Folder, de Browse | Bowen Atlanta S300 ME of Bee dd sacs Reagan 3. If you want fo install the application somewhere other than to the default location (Program and Dialog 20 Remote Software), click [Browse] and choose an alternate location.
11. Once all drivers have been installed, you are prompted fo [CLOSE] cut of setup, and fo start using the application. Feeler USD Diver Ste Transmutes US0C0C Dimer Statue 0 Transmitter S88 Railroader Diem Sue Dylan 20 LSE Ever Status Aldan at Mew you cay chisels and shay ust ihe ann. HOME SCREEN Once installation completes, the home screen displays.
CH LIE SETUP MODE Allows you to connect this configuration software fo your DIALOG 10 USB wireless receiver. 2. Select the USB connection method, and click [FIND RECEIVER]. The Ethernet connection is not applicable to the DIALOG 10 USB receiver. Lina £53 Automation Blinis if you select [Advanced Options], COM port options populate.
OFFLINE SETUP BODE Allows you to configure and save settings for future application. if you are using Offline Setup Mode, 1. Select [Offline Setup Mode] to connect the software fo your receiver. a Desalinate dn ng Sie aad aa 2. Select the type of receiver you want to save settings for. np covey getup in pine ede.
CONVINCING DIALOG 20 TRANSMITTERS WITH MA LOG 10 USB RECEIVER 1 2. Power on the receiver. Simultaneously press the two bunions on the bottom of the corresponding cerebra module. if the AUTO-CAN feature has been enabled, [Meetinghouse Scan > Enabled] “SCANNING” shows on the receiver LODE briefly. Then, "SYNCING" will appear when syn the transmitter. if the AUTO-CAN feature has been disabled, [Settings Auto Scan > Disabled] “SYNCING" will appear when sync the transmitter.
Update Wizard Allows you to update this PC software and firmware, and the latest firmware for your Clear One receivers and transmitters, SUMMARY Downloading Software: 1. Using a PC running Windows 7 or later (32 or 64 bit), with internet connection, download and install the WSB800 and DIALOG 20 Remote Software. 2. Goth nonnuclear. com / Resources / Resource Library / Professional Microphones / Clear One Wireless Microphones / Software Downloads. Updating Receiver Firmware: 1.
1. Select [Update System] to ses system update options, na eh od ein EMOTE SOFTWARE UPDATE 2. The following window displays Start with downloading the latest versions of software and firmware for your PC. Click [DOWNLOAD] Update Wren CARER fw Beatles wi plane i Ca Dns nail ani Ted lou prions This wind auto le process ST CER YoU Rte Spd Boorish ne ES nee inns Ton Ru OBE Aja 10: the sob site.
8. To configure the proxy, select [PROXY CONFIGURATION]. Enter your proxy information, place a check next to the “Use proxy” check mark, and select [SAVE] Gre Ea Le Ee Msg Le] RECEIVER FIRMWARE UPDATE 1. To start the process of updating your receiver firmware, click [UPDATE A RECEIVER] Update Weary OVERVIEW Ne aide opus in Devonian miss ind Sid nde i dle plod Bd wile de Horses GE brutalizing your Salem Step Loss nb wen nee ns Keno ping Su the fob site.
2. Once the receiver is detected and connected to by the software, the RECEIVER VERSION FORMATION window appears. Lone You Receives SE RR FARO HR Ra 3. Click [UPDATE RECEIVER] 4. Once all updates are complete, you are closed out of the RECEIVER VERSION INFORMATION window.
3. Once your transmitter is connected, the TRANSMITTER VERSION INFORMATION window displays. Click [UPDATE TRANSMITTER] Follow prompts for the first update Walt for the programming to complete. Once your final transmitter update is complete, a window verifying that your firmware is up-to date appears. Click [X] fo close out.
Help Libraries Gives you direct access to supporting documents, and the Cleaner website 1. Elect [Help Libraries] to see related user documents, or a link to the Clear One website.
Electronica Sods of Federal Regulations Tis 47: Telecommunications FART 15—RADIO FREQUENCY DEVICES Subpart B-Unintentional Radiators 515.105 Information fo the user. {8) For a Class A dial devices or peripheral, the Instructions furnished the user shall Include the following or similar state men, paced ing prominent ovation in the text of the manual: Note: This equipment has been tested and found to simply with the limits for a Class A dogie! devices, pursuant to part 15 of the FCG Rules.